ټیلر 5831N

Taylor Mechanical Long Ring Timer

موډل: 5831N

پیژندنه

The Taylor Mechanical Long Ring Timer is a reliable and easy-to-use device designed for precise time management in various settings, particularly in the kitchen. This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your timer.

کلیدي ځانګړتیاوې:

  • 60-minute countdown capacity.
  • Simple twist-dial operation.
  • Loud, 5-second alarm ring.
  • Bold black and white graphics for easy readability.
  • دوامداره پلاستيکي جوړښت.

محصول پای ته ورسیدview

The Taylor Mechanical Long Ring Timer features a classic design with a clear, easy-to-read dial. It is compact and designed for convenient placement on any flat surface.

Taylor Mechanical Long Ring Timer, front view

شکل 1: مخکی view of the Taylor Mechanical Long Ring Timer.

Taylor Mechanical Long Ring Timer with dimensions: 3.5 inches wide, 3.5 inches high, 1.5 inches deep

Figure 2: Dimensions of the Taylor Mechanical Long Ring Timer (3.5"D x 3.5"W x 1.5"H).

چمتو کول

Your Taylor Mechanical Long Ring Timer requires no batteries or complex assembly. It is ready for use directly out of the packaging.

  1. ټایمر له بسته بندۍ څخه لرې کړئ.
  2. Place the timer on a stable, flat surface where it can be easily seen and heard.

عملیاتي لارښوونې

To ensure the alarm rings for the full 5 seconds, it is crucial to wind the timer past the desired time before setting it back. This action fully engages the internal mechanism.

  1. Wind the Timer: Turn the dial clockwise all the way to the 60-minute mark. This winds the internal spring mechanism.
  2. مطلوب وخت وټاکئ: Turn the dial counter-clockwise to the desired time setting (e.g., 15 minutes).
  3. د شمېرنې پیل: The timer will begin to tick, counting down the set time.
  4. الارم: Once the dial reaches the zero mark, the timer will sound a loud, approximately 5-second ring.

مهمه یادونه: Failure to fully wind the timer to 60 minutes before setting the desired time may result in a shorter or no alarm sound.

ساتنه

Proper care will ensure the longevity and accuracy of your timer.

  • پاکول: ټایمر په نرم سره پاک کړئ، دamp cloth. Do not immerse the timer in water or use abrasive cleaners.
  • ذخیره کول: Store the timer in a dry place at room temperature.
  • د سختو شرایطو څخه ډډه وکړئ: Do not expose the timer to extreme heat, cold, or humidity, as this may affect its mechanical components.

د ستونزو حل کول

ستونزهاحتمالي لاملد حل لاره
Timer does not ring or rings for a short duration.ټایمر د تنظیم کولو څخه مخکې 60 دقیقې پورې په بشپړه توګه ټپي شوی نه و.Always turn the dial clockwise to the 60-minute mark, then counter-clockwise to the desired time.
Timer is not ticking.Timer not wound or mechanism is stuck.Ensure the timer is fully wound. If the issue persists, contact customer support.

مشخصات

  • د ماډل شمیره: 5831N
  • نښه: ټیلر
  • مواد: پلاستیک
  • رنګ: سپین
  • د محصول ابعاد: ۱۶"د x ۲۶"وچ x ۴۷"ح
  • د توکي وزن: 1.6 اونس
  • د اعظمي وخت ترتیب: 60 دقيقو
  • د الارم موده: نږدې 5 ثانیې
  • UPC: 077784058312

تضمین او ملاتړ

The Taylor Mechanical Long Ring Timer is covered by a یو کلن محدود تضمین from the manufacturer, Lifetime Brands Inc. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or further assistance, please contact Taylor customer service. Refer to the official Taylor webد اړیکو د تازه معلوماتو لپاره سایټ یا د محصول بسته بندي.

About Taylor

For over 170 years, Taylor has been a trusted brand in measurement, known for its commitment to high quality, precision, and innovative designs in kitchen, weather, and bath products. Taylor products are designed for everyday use, delivering dependable and durable performance.

Video: "Taylor - Life Measured" - An overview of the Taylor brand's commitment to precision and quality in various products.

© ۲۰۲۴ ټیلر. ټول حقونه خوندي دي.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.