Perel E305DIN1 DIN Rail Week Timer Instruction Manual

1. پیژندنه

This manual provides detailed instructions for the installation, operation, and maintenance of your Perel E305DIN1 DIN Rail Week Timer. Please read this manual thoroughly before using the device to ensure proper function and safety. The Perel E305DIN1 is designed for precise daily and weekly control of electrical circuits.

2. ځانګړتیاوې

The Perel E305DIN1 DIN Rail Week Timer offers a range of functionalities for efficient time management of electrical devices:

• Daily and Weekly Programming: Allows for flexible scheduling across days and weeks.
• 8 ON/OFF Program Locations: Configure up to 8 distinct ON and OFF switching times.
• د LCD نندارې: Clear display of time, day of the week, and current operating status.
• NiMH Backup Battery: Integrated battery provides up to 200 hours of autonomy after a full charge, preserving settings during power outages.
• 3-Way Manual Override: Easily switch between ON, OFF, and AUTO modes manually.
• د نصبولو اختیارونه: Designed for DIN rail mounting or wall mounting using the included bracket.
• شفاف محافظتي پوښ: Provides protection for the display and controls.

3. ترتیب او نصب کول

خبرداری: Installation should only be performed by a qualified electrician. Ensure the main power supply is disconnected before commencing installation.

3.1 پورته کول

The E305DIN1 timer can be mounted in two ways:

• د DIN ریل نصب کول: Snap the timer onto a standard 35mm DIN rail within an electrical enclosure.
• دیوال نصبول: Use the provided bracket to secure the timer to a wall. Ensure the mounting surface is stable and capable of supporting the device.

3.2 بریښنایی پیوستون

Refer to the wiring diagram provided with the device for specific connection points. General steps include:

1. Connect the main power supply (220-250VAC, 50Hz) to the designated input terminals.
2. Connect the load (device to be controlled) to the output terminals. Ensure the load's specifications do not exceed the timer's maximum output capacity (16A resistive, 8A inductive).
3. د بریښنا بیرته راګرځولو دمخه د ټولو اتصالونو د ټینګښت او سموالي لپاره دوه ځله وګورئ.

Image: Perel E305DIN1 DIN Rail Week Timer. This image shows the front view of the timer, highlighting its LCD display, control buttons, and transparent protective cover.

4. عملیاتي لارښوونې

After installation and power-up, the timer's internal battery will charge. Allow sufficient time for the battery to charge for optimal backup functionality.

۴.۳ د اوسني وخت او ورځې ټاکل

1. فشار ورکړئ ساعت تڼۍ
2. په داسې حال کې چې ساتل ساعت، فشار ورکړئ ورځ د اونۍ د نن ورځې د ټاکلو لپاره تڼۍ.
3. په داسې حال کې چې ساتل ساعت، فشار ورکړئ ساعت د اوسني ساعت د ټاکلو لپاره تڼۍ.
4. په داسې حال کې چې ساتل ساعت، فشار ورکړئ MIN د اوسنۍ دقیقې ټاکلو لپاره تڼۍ.

۴.۳ د پروګرام کولو وخت آن/آف کول

The timer allows for up to 8 ON/OFF program pairs.

1. فشار ورکړئ پروګ button once to enter program mode. The display will show '1 ON'.
2. د کارولو ورځ, ساعت، او MIN buttons to set the desired ON time for program 1.
3. مطبوعاتي پروګ again. The display will show '1 OFF'.
4. د کارولو ورځ, ساعت، او MIN buttons to set the desired OFF time for program 1.
5. Repeat steps 1-4 for programs 2 through 8.
6. فشار ورکړئ ساعت button to exit program mode and return to normal operation.

4.3 Manual Override Function

The manual override function allows you to temporarily change the timer's output state without affecting programmed settings.

• فشار ورکړئ لارښود د موډونو له لارې سایکل کولو لپاره تڼۍ:
• په: محصول په دوامداره توګه فعال دی، د هر پروګرام شوي بند وختونو په پرتله.
• بند: محصول په دوامداره توګه بند وي، د هر پروګرام شوي آن وختونو په پرتله.
• اتو: The timer operates according to the programmed ON/OFF schedules.

5. ساتنه

The Perel E305DIN1 timer requires minimal maintenance.

• پاکول: بهرنۍ برخه په نرم او وچ ټوکر سره پاکه کړئ. د کثافاتو پاکوونکو یا محلولونو څخه کار مه اخلئ.
• د بیټرۍ بیک اپ: The internal NiMH battery is designed for long life. If the timer frequently loses its settings during power outagکه نه، نو بیټرۍ ممکن د یو وړ تخنیکر لخوا بدلولو ته اړتیا ولري.
• د چاپیریال شرایط: Ensure the timer operates within its specified temperature range (-10°C to 40°C) and avoid excessive humidity or direct sunlight.

6. ستونزه حل کول

If you encounter issues with your Perel E305DIN1 timer, refer to the following common problems and solutions:

• ټایمر د پروګرام سره سم نه فعال/بند کیږي:
  • وګورئ چې ټایمر فعال دی که نه آټو mode. If it's in ON or OFF manual override, it will ignore programs.
  • Verify that the programmed ON/OFF times are correctly set and correspond to the current day.
  • Ensure the current time and day are accurately set on the timer.
• ښودنه خالي یا ځلېدونکې ده:
  • ټایمر ته د بریښنا اصلي رسولو وګورئ.
  • If power is present, the internal backup battery might be completely discharged. Allow the timer to be powered for several hours to recharge the battery.
• ټایمر د بریښنا بندولو وروسته تنظیمات له لاسه ورکويtage:
  • The internal NiMH backup battery may not be fully charged or may be at the end of its lifespan. Ensure the timer is continuously powered for at least 24 hours to fully charge the battery. If the issue persists, the battery may need replacement.
• Time drift (timer becomes inaccurate over time):
  • The timer has a specified accuracy of ±1 minute per month. Minor adjustments may be necessary periodically. If the drift is significantly higher, contact support.

که دا ګامونه ستونزه حل نه کړي، مهرباني وکړئ د پیرودونکو ملاتړ سره اړیکه ونیسئ.

7. مشخصات

Below are the technical specifications for the Perel E305DIN1 DIN Rail Week Timer:

8. تضمین او ملاتړ

This Perel product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the Perel customer service department.

د تضمین موخو لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.