Geberit PushControl Bathtub Drain and Overflow Unit Model 151.603 Instruction Manual

1. پیژندنه

This manual provides detailed instructions for the installation, operation, and maintenance of your Geberit PushControl Bathtub Drain and Overflow Unit, Model 151.603. This unit is designed for bathtubs with depths ranging from 17 to 24 inches and features a 27-inch stainless steel cable for reliable operation. Please read this manual thoroughly before installation and use to ensure proper function and safety.

The Geberit PushControl system offers a convenient push-button mechanism for opening and closing the bathtub drain, providing a clean and modern aesthetic for your bathroom.

2. د خوندیتوب معلومات

خبرداری: د دې خوندیتوب لارښوونو په تعقیب کې پاتې راتلل ممکن د ملکیت زیان، شخصي ټپي کیدو یا مړینې لامل شي.

• Always turn off the water supply before beginning any plumbing work.
• د نصبولو پرمهال مناسب شخصي محافظتي تجهیزات واغوندئ، لکه د خوندیتوب عینکې او دستکشې.
• ډاډ ترلاسه کړئ چې ټولې اړیکې خوندي او د اوبو ضد دي ترڅو د لیکیدو مخه ونیول شي.
• که تاسو د نصبولو پروسې د کومې برخې په اړه ډاډه نه یاست، نو د وړ نل لیکونکي سره مشوره وکړئ.
• کوچني برخې د ماشومانو د لاسرسي څخه لرې وساتئ ترڅو د ټکولو خطرونو مخه ونیول شي.

3. د بسته محتويات

د نصبولو پیل کولو دمخه ډاډ ترلاسه کړئ چې ټولې برخې شتون لري:

• Geberit PushControl Bathtub Drain and Overflow Unit (Model 151.603)
• Brass trim (Polished Chrome)
• د سټینلیس سټیل سټینر
• 27" stainless steel cable (Teflon coated)
• د نصب وسیله
• ګازکیټونه او فاسټینرونه

4. مشخصات

5. نصب کول

Before you begin, ensure you have all necessary tools and that the water supply to the bathtub is turned off. Refer to local plumbing codes for specific requirements.

5.1 اړین وسایل

• د پلمبر پوټین یا سیلیکون سیلانټ
• Adjustable wrench or channel locks
• سکریو ډرایور (فیلیپس او فلیټ هیډ)
• د اندازه کولو ټیپ
• د خوندیتوب شیشې او دستکشې

۴.۲ ګام په ګام نصب کول

1. د تشناب چمتو کول: Ensure the bathtub drain and overflow holes are clean and free of debris. The overflow hole should be between 2" and 2-1/2" in diameter.
2. Install the Drain Shoe: Apply plumber's putty or silicone sealant around the underside of the drain flange. Insert the drain flange into the bathtub drain hole from the inside of the tub. From underneath the tub, attach the drain shoe assembly, ensuring the gasket is properly seated. Tighten securely with an adjustable wrench.
3. Install the Overflow Assembly: Position the overflow gasket on the back of the overflow plate. Insert the overflow pipe assembly into the overflow hole from the outside of the tub. Align the overflow plate with the overflow hole from the inside of the tub and secure it with the provided screw. Ensure the cable is routed correctly and not kinked.
4. کیبل سره وصل کړئ: Connect the 27" stainless steel cable to both the drain stopper mechanism and the PushControl overflow trim. Follow the specific instructions provided with the unit for proper cable attachment and adjustment. The installation tool included will assist with this step.
5. Connect to Waste Pipe: Connect the 1-1/2" tubular piping of the drain and overflow unit to your existing waste pipe system. Ensure all connections are tight and sealed to prevent leaks.
6. د لیکونو لپاره ازموینه: Fill the bathtub with water and check all connections for any signs of leakage. Operate the PushControl mechanism several times to ensure the drain stopper opens and closes smoothly.

Image 1: Geberit PushControl Bathtub Drain and Overflow Unit (Model 151.603) showing the polished chrome trim and cable assembly. This image illustrates the main components of the unit.

6. عملیات

The Geberit PushControl system is designed for simple and intuitive operation.

• د اوبو د بندولو لپاره: Firmly press the center of the overflow trim plate. The drain stopper will move into the closed position, allowing the tub to fill with water.
• د ویالې د خلاصولو لپاره: Firmly press the center of the overflow trim plate again. The drain stopper will release, allowing water to drain from the tub.

Ensure the mechanism operates smoothly. If you experience resistance, refer to the Troubleshooting section.

7. ساتنه

Regular cleaning and maintenance will ensure the longevity and proper function of your Geberit PushControl unit.

• د ټرم پاکول: Clean the polished chrome trim with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals, abrasive pads, or acidic cleaners, as these can damage the finish.
• د ویالې پاکول: Periodically remove the drain stopper and clean any hair or debris that may have accumulated in the drain opening.
• د کیبل معاینه: Annually inspect the stainless steel cable for any signs of wear or damage. While the cable is Teflon coated for durability, extreme conditions or improper use can cause wear.

8. ستونزه حل کول

If problems persist after attempting these solutions, please contact Geberit customer support or a qualified plumber.

9. تضمین او ملاتړ

Geberit products are manufactured to the highest quality standards and come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Geberit webسایټ

For technical assistance, replacement parts, or further support, please contact Geberit customer service:

• Webسایټ: www.geberit.com
• د پیرودونکو خدمت: Refer to the Geberit webد سیمه ایزو اړیکو معلوماتو لپاره سایټ.

کله چې د ملاتړ سره اړیکه ونیسئ، مهرباني وکړئ د خپل محصول ماډل شمیره (151.603) او د پیرود نیټه شتون ولرئ.