Globe Electric Heath Zenith HZ-4133-SV Motion Sensing Security Light User Manual

1. پیژندنه

This manual provides detailed instructions for the installation, operation, and maintenance of your Globe Electric Heath Zenith HZ-4133-SV Motion Sensing Security Light. This outdoor wall-mounted fixture is designed to provide enhanced security and convenience with its integrated motion sensor. Please read these instructions carefully before installation and retain them for future reference.

Image 1.1: The Globe Electric Heath Zenith HZ-4133-SV Motion Sensing Security Light in silver finish.

2. د خوندیتوب معلومات

خبرداری: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. All wiring connections must be in accordance with local electrical codes. If you are unsure about wiring, consult a qualified electrician.

• Do not install this fixture on a dimmer switch.
• ډاډ ترلاسه کړئ چې د بریښنا رسولو 120V AC، 60Hz دی.
• Use only incandescent bulbs as specified. Do not exceed the maximum wattage.
• This product is intended for outdoor use and is weather resistant.
• Keep the motion sensor clear of obstructions to ensure proper function.

3. د بسته محتويات

د نصبولو پیل کولو دمخه ډاډ ترلاسه کړئ چې ټولې برخې شتون لري:

• 1 x Motion Sensing Security Light Fixture (Model HZ-4133-SV)
• 1 x Mounting Hardware Kit (screws, wire nuts)
• 1 x د کارونکي لارښود

یادونه: One 60-watt max medium base incandescent bulb is شامل نه دی او باید په جلا توګه وپلورل شي.

4. مشخصات

Image 4.1: Detailed dimensions of the HZ-4133-SV security light.

۵. نصب کول (تنظیم)

مخکې له دې چې تاسو پیل کړئ: Ensure the power to the electrical box is turned OFF at the circuit breaker or fuse box. Failure to do so may result in serious injury or death.

1. د تارونو چمتو کول: Carefully pull the electrical wires from the wall junction box.
2. د نصب کولو بریکٹ: Attach the mounting bracket (if not pre-attached to the fixture) to the junction box using the provided screws. Ensure it is securely fastened.
3. د تار نښلول: Connect the fixture's wires to your household wiring using the provided wire nuts. Match the wires as follows:
   • Black (Hot) to Black (Hot)
   • سپین (بې طرفه) ته سپین (بې طرفه)
   • شنه یا لوڅ مس (ځمکه) ته شنه یا لوڅ مس (ځمکه)
   ډاډ ترلاسه کړئ چې ټولې اړیکې ټینګې او خوندي دي.
4. د نصبولو فکسچر: Carefully tuck the connected wires into the junction box. Align the fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the wall and sealed to prevent water entry.
5. بلب نصب کړئ: Unscrew the bottom of the lantern or open the access panel (depending on design) and carefully screw in one 60-watt max medium base (E26) incandescent bulb. Do not overtighten.
6. د بریښنا بیرته راګرځول: په سرکټ بریکر کې بریښنا بیرته فعاله کړئ.

6. عملیات

Your motion sensing security light is designed to automatically turn on when motion is detected within its range and turn off after a set period.

• د حرکت کشف: The sensor detects motion up to 30 feet away within a 150-degree field of view. For optimal performance, ensure the sensor is not obstructed and is aimed towards the desired detection area.
• د حساسیت تنظیمول: The motion sensor typically has an adjustment dial (often located on the underside of the sensor head) to control sensitivity. Turn the dial to adjust how easily the sensor triggers. Lower sensitivity may be required in high-traffic areas to prevent false triggers.
• د وخت سمون: A separate dial or switch usually controls how long the light stays on after motion is detected. Common settings include 1, 5, or 10 minutes. Adjust this to your preference.
• لاسي بیارغونه: This fixture includes a manual override feature. To keep the light on continuously, quickly flip your wall switch OFF and then ON within 2 seconds. The light will remain on until you flip the switch OFF and then ON again, returning it to motion-sensing mode.

7. ساتنه

• پاکول: فکسچر په دوره یي ډول د نرم، ډ سره پاک کړئamp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or glass. Ensure the sensor lens is clean for proper operation.
• د بلب بدلول: Disconnect power at the circuit breaker before replacing the bulb. Allow the bulb to cool completely. Unscrew the old bulb and replace it with a new 60-watt max medium base (E26) incandescent bulb.
• د هوا مقاومت: While weather resistant, regular inspection for any signs of wear or damage to seals can help prolong the life of the fixture.

8. ستونزه حل کول

9. تضمین او ملاتړ

This Globe Electric Heath Zenith HZ-4133-SV Motion Sensing Security Light comes with a د 2 کلن محدود تضمین د پیرود نیټې څخه. دا تضمین د عادي کارونې الندې د موادو او کارموندنې نیمګړتیاوې پوښي.

For warranty claims, technical support, or replacement parts, please contact Globe Electric customer service. Keep your proof of purchase for warranty validation.

د اړیکو معلومات:

• Refer to the Globe Electric official webد اړیکو د تازه جزیاتو لپاره سایټ.
• آنلاین ملاتړ سرچینې هم شتون لري.