د D-Link DAP-1360 بې سیم N لاسرسي نقطې کارونکي لارښود

1. پیژندنه

The D-Link DAP-1360 Wireless N Access Point is a versatile networking device designed to extend or create a wireless network. It connects to a broadband modem, allowing you to share your internet connection wirelessly. This device is compliant with 802.11n standards, offering faster speeds and greater range compared to 802.11g, while maintaining backward compatibility with 802.11g and 802.11b devices. The DAP-1360 can be configured to operate in seven distinct modes to suit various networking requirements.

شکل 1: مخکی view of the D-Link DAP-1360 Wireless N Access Point. The device is black with two external antennas and indicator lights on the front panel.

2. د بسته محتويات

ډاډ ترلاسه کړئ چې ستاسو کڅوړه لاندې توکي لري:

• د D-Link DAP-1360 بې سیم N لاسرسي نقطه
• د بریښنا اډاپټر
• ایترنیټ کیبل
• د چټک نصبولو لارښود (که شامل وي)

که کوم توکي ورک یا زیانمن شوي وي، مهرباني وکړئ د خپل محلي D-Link پلورونکي سره اړیکه ونیسئ.

3. ترتیب کول

3.1 فزیکي نصب کول

1. موقعیت: DAP-1360 د خپلې خوښې بېسیم پوښښ ساحې دننه په مرکزي ځای کې ځای په ځای کړئ، د خنډونو او مداخلې سرچینو څخه لرې (د بیلګې په توګه، مایکروویو اوونونه، بې تار تلیفونونه).
2. بریښنا وصل کړئ: Plug the power adapter into the DAP-1360's power port and then into a wall outlet. The power LED on the device should illuminate.
3. شبکې سره وصل شئ: Connect one end of an Ethernet cable to the LAN port on the DAP-1360 and the other end to your broadband modem or existing network switch/router.

شکل 2: شاته view of the D-Link DAP-1360, highlighting the Ethernet port and power input for physical connections.

3.2 ابتدايي ترتیب

After physical installation, you will need to configure the DAP-1360 using a web browser. The exact steps may vary slightly depending on your chosen operating mode.

1. کمپیوټر وصل کړئ: Temporarily connect a computer directly to the DAP-1360's LAN port using an Ethernet cable, or connect wirelessly to its default Wi-Fi network (SSID and password usually found on a label on the device).
2. لاسرسی Web انٹرفیس: خلاص a web براوزر او د DAP-1360 ډیفالټ IP پته دننه کړئ (د مثال په توګه، http://192.168.0.50 or http://dlinkap). Refer to the Quick Installation Guide for the precise default IP and login credentials.
3. ننوتل: Enter the default username and password (e.g., username: اډمین، رمز: [leave blank] or اډمین).
4. د تنظیم وزرډ چلول: Follow the on-screen setup wizard to select your desired operating mode and configure network settings, including Wi-Fi name (SSID) and password.
5. ترتیبات خوندي کړئ: Apply and save your configuration changes. The device may restart.

4. عملیاتي طریقې

The DAP-1360 offers seven distinct operating modes, allowing it to adapt to various network environments and requirements.

• د لاسرسي نقطې (AP) حالت: This is the default mode. The device acts as a central hub, allowing wireless clients to connect to a wired network. It converts a wired connection into a wireless one.
• د بېسیم مراجع حالت: In this mode, the DAP-1360 connects to another access point wirelessly, acting as a wireless adapter for a wired device (e.g., a desktop PC or gaming console without Wi-Fi).
• د پل حالت: This mode allows two wired networks (LANs) to be joined wirelessly. It creates a wireless link between two segments of a wired network.
• Bridge with AP Mode: Combines the functionality of Bridge mode with Access Point mode. The device acts as a wireless hub for local clients while simultaneously bridging two wired networks.
• د تکرار حالت: Extends the coverage of an existing wireless network. The DAP-1360 receives a wireless signal and re-transmits it, eliminating "dead spots" and increasing the range of your Wi-Fi.
• د WISP مراجع روټر حالت: Designed for Wireless Internet Service Provider (WISP) subscribers. It allows the DAP-1360 to connect wirelessly to a WISP network and share that internet connection with multiple wired computers in a home or office without needing an additional router.
• WISP Repeater Mode: Similar to WISP Client Router mode, but also extends the WISP connection wirelessly to other wireless devices within the local network, acting as both a client and a repeater for the WISP service.

5. ساتنه

Regular maintenance ensures optimal performance and longevity of your DAP-1360.

• د فرم ویئر تازه معلومات: په دوره یي ډول د ډي-لینک ملاتړ وګورئ webد فرم ویئر تازه معلوماتو لپاره سایټ. د فرم ویئر تازه کول کولی شي فعالیت ښه کړي، نوي ځانګړتیاوې اضافه کړي، او امنیتي زیانونه حل کړي.
• پاکول: وسیله پاکه او له دوړو څخه پاکه وساتئ. د بهرنۍ برخې د پاکولو لپاره نرم، وچ ټوکر وکاروئ. د مایع پاکوونکو یا ایروسولونو څخه کار مه اخلئ.
• وینټیلیشن: Ensure the device has adequate ventilation. Do not cover ventilation openings or place the device in an enclosed space that restricts airflow.
• بیا پیل کول: If the device experiences intermittent issues, a simple restart (unplugging the power for 10 seconds and plugging it back in) can often resolve them.

6. ستونزه حل کول

This section addresses common issues you might encounter with your DAP-1360.

۷.۱ بریښنا نشته / وسیله نه چالانېږي

• Ensure the power adapter is securely connected to both the DAP-1360 and a working electrical outlet.
• د بل وسیلې په لګولو سره د بریښنا آوټ لیټ فعال دی تصدیق کړئ.
• Check if the power adapter is the correct one supplied with the device.

۸.۱ لاسرسی نشي کولی Web-Based Configuration Utility

• Ensure your computer is directly connected to the DAP-1360 via Ethernet or wirelessly to its default SSID.
• Verify your computer's IP settings are set to "Obtain an IP address automatically" (DHCP).
• تایید کړئ چې تاسو سم ډیفالټ IP پته کاروئ (د مثال په توګه، http://192.168.0.50) یا کوربه نوم (http://dlinkap).
• د خپل براوزر کیش پاکولو یا بل کارولو هڅه وکړئ web براوزر
• If you have changed the device's IP address and forgotten it, you may need to perform a factory reset.

6.3 No Internet Connection / Slow Speeds

• Check the physical Ethernet cable connection between the DAP-1360 and your modem/router.
• ډاډ ترلاسه کړئ چې ستاسو موډیم/روټر په سمه توګه کار کوي او فعال انټرنیټ اتصال لري.
• Ensure the DAP-1360 is configured in the correct operating mode for your network setup.
• Restart both your modem/router and the DAP-1360.
• Check for wireless interference from other devices.
• Confirm that your wireless security settings (WPA2, WPA) are correctly configured.

6.4 Wireless Network Not Visible

• Ensure the DAP-1360 is powered on and the wireless LED indicator is active.
• Check if the SSID Broadcast feature is enabled in the device's web ترتیب
• Verify that the wireless channel is not conflicting with other networks in your area. Try changing the channel in the settings.
• If the issue persists, try restarting the DAP-1360.

7. مشخصات

8. تضمین او ملاتړ

For warranty information, please refer to the documentation included with your product or visit the official D-Link website for your region. D-Link provides technical support and resources to assist with product setup and troubleshooting.

For any queries or technical assistance, you may contact D-Link support channels. For specific inquiries related to purchase or local support, you may also contact your reseller. For example, Bizgram Asia Pte Ltd can be reached at +65-87776958 for support in their region.