د فورني ۵۸۴۰۲ بریښنایی استخراج لارښوونې لارښود

1. محصول ختم شوview

The Forney 58402 is a heavy-duty Bakelite pin-type wall electrical receptacle designed for surface mounting. It features a 2-pole/3-wire grounding configuration, suitable for high-power applications. This receptacle is rated for 50 Amps at 125/250 Volts and conforms to NEMA 6-50 standards.

کلیدي ځانګړتیاوې:

• Heavy duty Bakelite pin-type design for durability.
• Wall electrical receptacle for surface mounting.
• 2-pole/3-wire grounding for enhanced safety.
• 50 Amp with 125/250-Volt capacity.
• NEMA 6-50 electrical configuration.

شکل 1: مخکی view of the Forney 58402 Electrical Receptacle, showing the pin configuration and voltage/ampد ایج درجه بندي.

2. د خوندیتوب معلومات

خبرداری: Electrical work can be hazardous. Always disconnect power at the circuit breaker or fuse box before installing, servicing, or removing this receptacle. Failure to do so may result in serious injury or death. If you are unsure about any part of these instructions, consult a qualified electrician.

• ډاډ ترلاسه کړئ چې ټول محلي او ملي بریښنا کوډونه تعقیب شوي.
• د مناسب شخصي محافظتي تجهیزاتو (PPE) څخه کار واخلئ، لکه موصل شوي دستکشې او د خوندیتوب عینکې.
• والیت تایید کړئtage او amperage of your circuit match the receptacle's ratings (50A, 125/250V).
• Do not use this receptacle if it appears damaged.
• ماشومان د بریښنایی تاسیساتو څخه لرې وساتئ.

3. ترتیب او نصب کول

This section provides general guidelines for installing the Forney 58402 wall receptacle. Specific wiring configurations may vary based on local codes and existing electrical systems.

اړین توکي او توکي:

• سکرو ډرایور (فیلپس او فلیټ هیډ)
• واير سټرپرېز
• والیtage ټیسټر
• Mounting screws (appropriate for surface)
• د بریښنا بکس (که چیرې دمخه شتون ونلري)

د نصبولو مرحلې:

1. د بریښنا قطع کول: د سرکټ ماتونکی یا فیوز ومومئ چې سرکټ کنټرولوي چیرې چې استخراج به نصب شي او بند یې کړئ. د حجم په کارولو سره تایید کړئ چې بریښنا بنده دهtage ټیسټر.
2. د نصب کولو سطحه چمتو کړئ: Ensure the surface is clean, dry, and structurally sound. The receptacle is designed for surface mounting.
3. Mount the Receptacle Base: Position the receptacle base on the desired surface. Use appropriate mounting screws to secure it firmly. The back of the receptacle features pre-drilled holes for this purpose.


شکل 2: شاته view of the Forney 58402 Receptacle, showing the metal mounting plate and screw holes for surface installation.

4. د تار نښلول: This receptacle is a 2-pole/3-wire grounding type (NEMA 6-50). It typically requires two hot wires (L1, L2) and one ground wire.
• Strip approximately 1/2 inch of insulation from each wire.
• Connect the L1 (Hot) wire to one of the brass-colored terminals.
• Connect the L2 (Hot) wire to the other brass-colored terminal.
• Connect the Ground wire (typically green or bare copper) to the green hexagonal grounding screw.


شکل 3: لاندې view of the Forney 58402 Receptacle, illustrating the internal wiring access points and terminals.

5. خوندي تارونه: Ensure all wire connections are tight and secure. No bare wire should be exposed outside the terminals.
6. بیا یوځای کول: Carefully place the cover over the wired base and secure it with the provided screws.
7. د بریښنا بیرته راګرځول: Once installation is complete and verified, turn the power back ON at the circuit breaker or fuse box.

4. عملیاتي لارښوونې

The Forney 58402 Electrical Receptacle is designed for straightforward operation.

1. مطابقت تایید کړئ: Ensure the plug of your electrical device is compatible with the NEMA 6-50 configuration of this receptacle.


4 شکل: تړل view of the Forney 58402 Receptacle's pin configuration, showing the 50A 250V markings.

2. پلګ داخل کړئ: Align the pins of your device's plug with the slots on the receptacle and firmly insert the plug.
3. پلګ لرې کړئ: To disconnect, grasp the plug firmly and pull it straight out from the receptacle. Do not pull by the cord.

5. ساتنه

Regular inspection and basic maintenance will help ensure the longevity and safe operation of your Forney 58402 receptacle.

• وختي معاینه: Annually inspect the receptacle for any signs of damage, cracks, discoloration, or loose connections.
• پاکول: With power disconnected, gently wipe the exterior of the receptacle with a dry, clean cloth to remove dust or debris. Do not use liquid cleaners.
• اړیکې ټینګول: If comfortable and with power disconnected, periodically check and tighten the terminal screws to ensure secure wire connections.
• د چاپیریال ساتنه: که په اعلان کې نصب شيamp or dusty environment, ensure the receptacle is adequately protected from moisture and excessive dust accumulation.

6. ستونزه حل کول

If you experience issues with your Forney 58402 receptacle, consider the following common troubleshooting steps:

If troubleshooting steps do not resolve the issue, or if you are unsure, contact a qualified electrician.

7. مشخصات

8. تضمین او ملاتړ

Specific warranty details for the Forney 58402 Electrical Receptacle are not provided in this manual. For warranty information, technical support, or service inquiries, please refer to the product packaging or contact Forney customer service directly.

You may visit the official Forney webد اړیکو معلوماتو او اضافي سرچینو لپاره سایټ: www.forneyind.com