NGK 5506 HT Lead Set Instruction Manual

1. محصول ختم شوview

The NGK 5506 HT Lead Set is designed to provide reliable ignition performance for compatible vehicle models. This set includes four resistive ignition cables, ensuring efficient power transfer to the spark plugs. Proper installation and maintenance are crucial for optimal engine operation and longevity of the components.

شکل 1: NGK 5506 HT Lead Set. This image displays the complete set of four high tension ignition cables, coiled together, highlighting their black color and robust construction.

2. مطابقت

This NGK 5506 HT Lead Set is compatible with specific vehicle models. Verify your vehicle's compatibility before installation. Refer to your vehicle's service manual or consult a qualified mechanic if unsure.

پېژندل شوي مطابقت لرونکي ماډلونه:

Hyundai Getz Hatchback 1.3 (2002 - 2010) 63kW
Hyundai Accent II 1.3 (1999 - 2005) 63kW
Hyundai Getz Hatchback 1.3 i (2002 - 2010) 60kW
Hyundai Accent II 1.3 (1999 - 2005) 55kW
Hyundai Accent II 1.3 (1999 - 2005) 62kW
Hyundai Accent II 1.3 (1999 - 2005) 61kW
Hyundai Accent Saloon 1.3 (1999 - 2006) 55kW
Hyundai Accent Saloon 1.3 (1999 - 2006) 63kW

Equivalent Part Numbers:

HYUNDAI: 27501-22B10, 27501-02D00, 27501-22B00
KIA: 27501-22B10
BERU: 0300891519, ZEF1519
BOSCH: B898, 0986356898
EUROCABLE: EC 7759
FAE: 85998
NIPPARTS: J5380512
BRECAV: 29.505
BREMI: 600/481
FACET: 4.7119

3. د خوندیتوب احتیاطي تدابیر

Always prioritize safety when working on vehicle ignition systems. High voltage is present. Failure to follow safety guidelines can result in serious injury or damage to the vehicle.

Ensure the vehicle's engine is completely off and cooled down before beginning any work.
Disconnect the negative terminal of the vehicle's battery to prevent accidental engine cranking or electrical shock.
مناسب شخصي محافظتي تجهیزات واغوندئ، په شمول د خوندیتوب عینکې او موصل شوي دستکشې.
Avoid touching metal components of the ignition system while the engine is running or the battery is connected.
که تاسو د کوم ګام په اړه ډاډه نه یاست، نو د مسلکي میخانیک سره مشوره وکړئ.

۵. نصب کول (تنظیم)

This section outlines the general procedure for installing the NGK 5506 HT Lead Set. Specific steps may vary slightly depending on the vehicle model. Always refer to your vehicle's service manual for detailed instructions.

چمتووالی: موټر په یوه هواره سطحه ودروئ، د پارکینګ بریک ولګوئ، او ډاډ ترلاسه کړئ چې انجن بند او یخ دی. د منفي بیټرۍ ټرمینل جلا کړئ.
Identify Existing Leads: Locate the current high tension leads connecting the ignition coil (or distributor) to the spark plugs. Note the routing and length of each lead. It is recommended to replace one lead at a time to avoid mixing up connections.
Remove Old Leads: Carefully grasp the spark plug boot and twist slightly while pulling to remove it from the spark plug. Do not pull on the wire itself. Repeat for the ignition coil/distributor end.
Compare New Leads: Select a new NGK 5506 lead that matches the length and connector type of the lead you just removed. The set includes leads of varying lengths to fit different cylinder positions.

شکل 2: تړل view of NGK HT Lead connectors. This image shows the spade connector type and the spark plug boot end, illustrating the design of the cable ends.

Install New Leads: Apply a small amount of dielectric grease (not included) to the inside of both ends of the new lead. This aids in sealing and prevents corrosion. Firmly push the spark plug boot onto the spark plug until it clicks or seats securely. Then, connect the other end to the corresponding terminal on the ignition coil or distributor. Ensure a snug fit.
Repeat for All Leads: Continue this process, replacing one lead at a time, until all old leads have been replaced with the new NGK 5506 HT Lead Set.

شکل 3: NGK HT Lead Set showing different lengths. This image displays three individual high tension leads, each with a distinct length, demonstrating the variety provided in the set for different cylinder configurations.

Secure Leads: Ensure the new leads are routed correctly and secured away from hot engine components or moving parts to prevent damage.
وروستی چک: Double-check all connections to ensure they are secure. Reconnect the negative battery terminal.

۳. عملیاتي ملاحظات

Once installed, the NGK 5506 HT Lead Set operates as part of your vehicle's ignition system. No specific user operation is required beyond normal vehicle use. The leads are designed for long-term, maintenance-free operation under normal driving conditions.

After installation, start the engine and listen for any unusual sounds or misfires.
Observe the engine's idle and acceleration for smooth operation.
که کومه ستونزه رامنځته شي، د ستونزو حل برخې ته مراجعه وکړئ.

6. ساتنه

The NGK 5506 HT Lead Set is designed for durability. Regular inspection is recommended as part of your vehicle's routine maintenance schedule.

بصری معاینه: Periodically check the leads for signs of wear, cracking, fraying, or damage to the insulation. Look for any discoloration or burn marks, which could indicate arcing.
د اتصال بشپړتیا: Ensure all connections to the spark plugs and ignition coil/distributor remain tight and free from corrosion.
پاکول: If necessary, gently wipe the leads with a clean, damp cloth to remove dirt or oil. Avoid using harsh chemicals or solvents.
بدلول: Replace leads if any damage is observed or if engine performance issues (e.g., misfires, rough idle) are suspected to be related to the ignition system.

7. ستونزه حل کول

If you experience issues after installing the NGK 5506 HT Lead Set, consider the following common problems and solutions:

علامه	احتمالي لامل	د حل لاره
Engine Misfire / Rough Idle	Incorrect lead connection, damaged lead, faulty spark plug, or other ignition component issue.	Verify all leads are securely connected to the correct spark plug and ignition coil/distributor terminal. Inspect leads for visible damage. Check spark plugs for wear or damage. Consult a diagnostic tool for specific cylinder misfire codes.
Engine Cranks but Does Not Start	No spark, fuel delivery issue, or timing problem.	Ensure all leads are properly installed and connected. Check for spark at the spark plugs (use a spark tester, if available, with caution). Verify fuel pressure and injector operation. If no spark, inspect ignition coil/distributor and crankshaft position sensor.
Poor Engine Performance / Reduced Fuel Economy	Degraded lead performance, incorrect spark plug gap, or other engine issues.	Inspect leads for internal resistance issues (requires a multimeter and specific knowledge). د سپارک پلګ حالت او تشه وګورئ. Ensure air filter is clean and fuel system is operating correctly.

که چیرې د ستونزو حل کولو ګامونه ستونزه حل نه کړي، نو سپارښتنه کیږي چې د تصدیق شوي موټر تخنیکین څخه مرسته وغواړئ.

8. مشخصات

Detailed technical specifications for the NGK 5506 HT Lead Set:

د ماډل شمیره: 5506
نښه: د ‏‎NGK
جوړونکی: NGK SPARK PLUG
Ignition Cable Type: Resistive Ignition Cable
د سرکونو شمیر: 4
رنګ: تور
مواد: Lead (referring to the cable material, not the element)
د نښلونکي ډول: د سپیډ نښلونکی
د محصول ابعاد: Approximately 5.08 x 4.1 x 3.34 cm (packaged)
د توکي وزن: تقریبا 290 ګرامه
UPC: 087295055069
د OEM برخې شمیرې: HYUNDAI: 27501-02D00, 27501-22B00, 27501-22B10; KIA: 27501-22B10

9. تضمین او ملاتړ

For warranty information or technical support regarding your NGK 5506 HT Lead Set, please refer to the official NGK website or contact your authorized NGK dealer. Keep your purchase receipt as proof of purchase.

جوړونکی: NGK SPARK PLUG

د نورو مرستو لپاره، لیدنه وکړئ NGK Global Webسایټ.

NGK 5506