Eiko 43A/CL/H-120V

Eiko Halogen A19 43W Clear 120V Bulb User Manual

Model: 43A/CL/H-120V

۱.۱. د خوندیتوب مهم معلومات

Please read all instructions carefully before installing or using this Eiko Halogen A19 bulb. Failure to follow these instructions may result in electric shock, fire, or other hazards.

  • د بریښنا شاک خطر: تل د نصبولو، لرې کولو، یا تفتیش څخه مخکې د سرکټ بریکر یا فیوز بکس کې د فکسچر بریښنا بنده کړئ.
  • د سوځیدنې خطر: Halogen bulbs operate at high temperatures. Do not touch the bulb while it is operating or immediately after it has been turned off. Allow the bulb to cool completely before handling.
  • سمه ضایع کول: کارول شوي بلبونه د ځایی مقرراتو سره سم له منځه یوسئ.
  • یوازې د کور دننه کارول: دا بلب د مناسبو فکسچرونو کې د کور دننه کارونې لپاره ډیزاین شوی.
  • Do Not Exceed Wattage: Ensure the fixture's maximum wattage rating is not exceeded. This bulb is 43W.
  • په احتیاط سره سمبالول: Avoid touching the glass portion of the bulb with bare hands, as oils can reduce bulb life. Use a clean cloth or gloves if necessary.

2. ترتیب او نصب کول

Follow these steps to safely install your Eiko Halogen A19 bulb:

  1. د بریښنا بندول: Locate the light fixture's power switch and turn it to the "OFF" position. For added safety, turn off the power at the main circuit breaker or fuse box.
  2. د یخولو اجازه: If replacing an existing bulb, ensure it has cooled down completely before touching it.
  3. زوړ بلب لرې کړئ: زوړ بلب په احتیاط سره د ساعت د مخالف لوري ساکټ څخه خلاص کړئ.
  4. فکسچر معاینه کړئ: د څراغ ساکټ وګورئ چې کوم زیان یا کثافات شتون لري. ډاډ ترلاسه کړئ چې پاک او وچ دی.
  5. نوی بلب نصب کړئ: Gently screw the Eiko Halogen A19 bulb clockwise into the socket until it is snug. Do not overtighten.
  6. د بریښنا بیرته راګرځول: Turn the power back on at the circuit breaker or fuse box, then turn on the light switch.
Eiko Halogen A19 43W Clear 120V Bulb

Image 1: Eiko Halogen A19 43W Clear 120V Bulb. This image shows the clear glass bulb with a standard screw-in base, typical of an A19 shape.

3. عملیاتي لارښوونې

The Eiko Halogen A19 bulb operates like a standard incandescent bulb. Once installed, simply use the light fixture's switch to turn the bulb on or off.

  • په فوري توګه: The bulb provides instant full brightness upon activation.
  • د رڼا کیفیت: This halogen bulb produces a brighter, whiter light compared to traditional incandescent bulbs, enhancing visibility and color rendition.
  • دیمینګ: If used in a dimmable fixture with a compatible dimmer switch, this bulb can be dimmed. Ensure your dimmer is rated for halogen or incandescent loads.

4. ساتنه

Minimal maintenance is required for your Eiko Halogen A19 bulb. However, following these guidelines can help ensure optimal performance and longevity:

  • پاکول: If the bulb becomes dusty, ensure the power is off and the bulb is cool. Gently wipe the glass with a clean, dry, lint-free cloth. Do not use liquid cleaners.
  • بدلول: Halogen bulbs, like all light sources, will dim over time and eventually burn out. For consistent light output, consider replacing bulbs when a noticeable decrease in brightness occurs. It is often recommended to replace bulbs in multi-bulb fixtures at the same time for uniform light.
  • سمبالول: When replacing, avoid touching the new bulb's glass with bare hands. Oils from your skin can create hot spots and reduce bulb life. Use a clean cloth or gloves.

5. ستونزه حل کول

If your Eiko Halogen A19 bulb is not functioning as expected, refer to the following common issues and solutions:

ستونزهاحتمالي لاملد حل لاره
بلب نه روښانه کیږي.
  • فکسچر ته هیڅ ځواک نشته.
  • بلب په سمه توګه نه دی لګول شوی.
  • بلب خراب دی یا د ژوند پای ته رسیدلی دی.
  • د فکسچر سویچ بند دی.
  • سرکټ بریکر/فیوز چیک کړئ.
  • Ensure bulb is securely screwed into the socket (power off first).
  • بلب د نوي سره بدل کړئ.
  • Turn on the fixture switch.
بلب فلیکر.
  • Loose connection in the socket.
  • نا مطابقت لرونکی ډیمر سویچ.
  • والیtage تغیرات.
  • Turn off power, then tighten the bulb.
  • ډاډ ترلاسه کړئ چې ډیمر د هالوجن بلبونو سره مطابقت لري.
  • که چیرې برېښنایی کارکوونکی وغواړئ، نو مشوره یې وکړئtage ستونزې دوام لري.
بلب ژر سوځي.
  • ډیر واټtage د فکسچر لپاره.
  • د برېښنا پرله پسې څپې.
  • ډیر وایبریشن.
  • د نصبولو پرمهال په خالي لاسونو سره شیشې ته لمس کول.
  • Verify fixture's maximum wattage.
  • د سرکټ لپاره د سرج محافظ په پام کې ونیسئ.
  • Ensure fixture is stable.
  • Handle new bulbs with a cloth or gloves.

6. د محصول مشخصات

Detailed specifications for the Eiko Halogen A19 43W Clear 120V bulb:

  • نښه: ايکو
  • د ماډل شمیره: 43A/CL/H-120V
  • د رڼا ډول: هالوجن
  • واټtage: 43 واټ
  • د بلب شکل اندازه: A19
  • والیtage: 120 ولټه
  • د رنګ حرارت: 2900 کیلوین
  • پای: روښانه
  • مواد: Tungsten (filament)
  • د محصول ابعاد: نږدې 1 x 1 x 2.7 انچه
  • د توکي وزن: نږدې 3.2 اونس
  • ځانګړي استعمالونه: General purpose lighting, lamps

7. تضمین او ملاتړ

7.1. محدود تضمین

Eiko products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship under normal use. The specific duration and terms of the warranty may vary. Please retain your proof of purchase for warranty claims.

7.2. د پیرودونکي ملاتړ

For technical assistance, warranty inquiries, or further information regarding your Eiko Halogen A19 bulb, please contact Eiko customer support. Refer to the official Eiko webد اړیکو د تازه معلوماتو لپاره سایټ یا د محصول بسته بندي.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.