3M Scotch-Grip Rubber & Gasket Adhesive 021200-19868 Instruction Manual

پیژندنه

This manual provides essential instructions for the safe and effective use of the 3M Scotch-Grip Rubber & Gasket Adhesive, Model 021200-19868. Please read all instructions carefully before use to ensure proper application and to prevent injury or product damage. This product is designed for industrial and occupational use only.

د خوندیتوب معلومات

WARNING: EXTREMELY FLAMMABLE LIQUID AND VAPOR. MAY CAUSE FLASH FIRE. VAPOR HARMFUL. Read all precautions on the product label before use.

د 3M صنعتي او حرفوي محصولات د کارځای کارولو لپاره روزل شوي صنعتي او حرفوي پیرودونکو ته د پلور لپاره ټاکل شوي، لیبل شوي او بسته شوي دي. پرته لدې چې په ځانګړي ډول د تطبیق وړ محصول بسته بندۍ یا ادبیاتو کې بل ډول ویل شوي وي، دا محصولات د مصرف کونکو لخوا د پلور یا کارولو لپاره نه دي ټاکل شوي، لیبل شوي، یا بسته شوي دي (د مثال په توګه، د کور، شخصي، لومړني یا ثانوي ښوونځي، تفریحي/سپورت، یا نورو استعمالونو لپاره چې د تطبیق وړ محصول بسته بندۍ یا ادبیاتو کې ندي تشریح شوي)، او باید د تطبیق وړ روغتیا او خوندیتوب مقرراتو او معیارونو (د مثال په توګه، US OSHA، ANSI)، او همدارنګه د ټولو محصول ادبیاتو، د کارونکي لارښوونو، خبرداریو، او نورو محدودیتونو سره سم غوره او کارول شي، او کارونکي باید د هر ډول یادولو، ساحې عمل، یا د محصول کارولو نورو خبرتیاو لاندې اړین اقدام وکړي. د 3M صنعتي او حرفوي محصولاتو ناوړه ګټه اخیستنه ممکن د ټپي کیدو، ناروغۍ، مړینې، یا ملکیت زیان لامل شي. د محصول انتخاب او کارولو کې د مرستې لپاره، د خپل په ساحه کې د خوندیتوب مسلکي، صنعتي حفظ الصحې، یا د نورو موضوع متخصص سره مشوره وکړئ. د اضافي محصول معلوماتو لپاره، لیدنه وکړئ www.3M.com.

محصول پای ته ورسیدview

The 3M Scotch-Grip Rubber & Gasket Adhesive 021200-19868 is a high-performance, yellow-colored nitrile adhesive designed for bonding rubber and gasket materials. It is supplied in a 5 oz tube and offers a working time of approximately 12 minutes.

شکل 1: 3M Scotch-Grip Rubber & Gasket Adhesive in a 5 oz tube.

کلیدي ځانګړتیاوې

• د موادو مطابقت: Specifically formulated for rubber and gasket materials.
• لوړ فعالیت: Nitrile-based for strong, durable bonds.
• کاري وخت: Approximately 12 minutes, allowing for repositioning.
• رنګ: Yellow for easy visibility during application.
• بسته بندي: Convenient 5 oz tube for controlled dispensing.

تنظیم او چمتو کول

1. وینټیلیشن: Ensure adequate ventilation in the work area due to flammable vapors. Use in a well-ventilated area or with local exhaust ventilation.
2. د سطحې چمتو کول: Surfaces to be bonded must be clean, dry, and free of oil, grease, dust, and other contaminants. For best results, abrade smooth surfaces lightly.
3. شخصي محافظتي تجهیزات (PPE): Wear appropriate PPE, including safety glasses and chemical-resistant gloves, to prevent skin and eye contact.
4. دحرارت درجه: Apply adhesive at room temperature (typically 65-80°F / 18-27°C) for optimal performance.

عملیات او غوښتنلیک

1. توزیع کول: Puncture the seal of the tube (if present) and attach the nozzle.
2. غوښتنلیک: Apply a thin, uniform coat of adhesive to دواړه surfaces to be bonded. Ensure complete coverage, especially at edges.
3. د خلاصیدو وخت: Allow the adhesive to dry for approximately 2-5 minutes, or until it becomes tacky to the touch but does not transfer to a knuckle. This is within the 12-minute working time.
4. تړل: Carefully align the two surfaces and press them firmly together. Apply uniform pressure across the entire bonded area.
5. درملنه: The adhesive will achieve handling strength quickly, but full cure time is approximately 24 hours. Avoid stressing the bond during this period.

ساتنه او ذخیره کول

• د پاکولو وسایل: Clean tools and excess adhesive immediately after use with an appropriate solvent (e.g., methyl ethyl ketone or toluene), following solvent manufacturer's safety instructions.
• ذخیره کول: Store the adhesive in its original, tightly sealed container in a cool, dry, well-ventilated area, away from direct sunlight and sources of ignition. Keep out of reach of children.
• تخریب: Dispose of unused adhesive and empty containers according to local, state, and federal regulations.

د ستونزو حل کول

کمزوری چپکونکی:

Ensure surfaces were properly cleaned and dried. Verify that sufficient pressure was applied during bonding. Check if the adhesive was allowed adequate open time to become tacky before joining surfaces.

Adhesive Not Curing:

Confirm that the application temperature was within the recommended range. Allow the full 24-hour cure time before evaluating final bond strength.

Excessive Odor:

Ensure the work area is adequately ventilated. If odor persists or is strong, evacuate the area and improve ventilation before resuming work.

مشخصات

تضمین او ملاتړ

For specific warranty information, please refer to the product packaging or contact 3M directly. For technical support or further inquiries, please visit the official 3M webپه سایټ کې www.3M.com یا د دوی د پیرودونکو خدماتو څانګې سره اړیکه ونیسئ.

اضافي سرچینې

For more information on 3M industrial products and safety guidelines, please visit the په ایمیزون کې د 3M صنعتي پلورنځی.