Tacwise A8016LN Pneumatic Upholstery Stapler

1. پیژندنه

The Tacwise A8016LN is a professional-grade pneumatic upholstery stapler designed for precision and efficiency in various upholstery and general stapling tasks. This tool features an extra-long nose for accessing confined spaces and utilizes Type 80 staples ranging from 4mm to 16mm in length. Its lightweight design and ergonomic features ensure comfortable and controlled operation.

Figure 1: The Tacwise A8016LN pneumatic stapler in an upholstery application.

2. د خوندیتوب معلومات

Always prioritize safety when operating pneumatic tools. Failure to follow safety guidelines can result in serious injury.

• لارښود ولولئ: د عملیاتو دمخه، پدې لارښود کې ټولې لارښوونې او اخطارونه په بشپړه توګه ولولئ او پوه شئ.
• شخصي محافظتي تجهیزات (PPE): Always wear safety glasses or goggles to protect against flying debris. Hearing protection is recommended.
• هوايي اکمالات: Ensure the air compressor is set to the recommended operating pressure (4.1 to 6.9 bar / 60-100 psi). Never exceed the maximum pressure rating of the tool.
• د هوا قطع کول: Always disconnect the air supply before loading staples, performing maintenance, clearing jams, or when the tool is not in use.
• د وسیلې تفتیش: Before each use, inspect the tool for any damage, loose parts, or air leaks. Do not use a damaged tool.
• د کار ساحه: Keep the work area clean, well-lit, and free from obstructions. Keep bystanders, especially children, away from the operating area.
• مناسب گرفت: Maintain a firm grip on the tool and be aware of its balance.
• د ناڅاپي ډزو څخه ډډه وکړئ: Never point the tool at yourself or others. Keep fingers away from the trigger when not stapling.
• سم فاسټینرونه وکاروئ: Only use Type 80 staples with lengths between 4mm and 16mm.

3. محصول ختم شوview او اجزا

The Tacwise A8016LN is engineered for user comfort and efficient performance. Familiarize yourself with the key components of the stapler.

Figure 2: Key features of the A8016LN stapler.

• د وتلو سیسټم: Located at the top, designed for efficient air release.
• Single Sequential Trigger: Ensures precise and controlled stapling.
• Extra-Long Thin Nose: Allows access to tight and intricate spaces for accurate staple placement.
• Large Capacity Magazine: Holds up to 150 Type 80 staples.
• Quick-Release Loading System: Facilitates fast and easy staple reloading.
• Rubberized Grip: Provides enhanced safety and comfort during extended use.
• د هوا داخله: د کمپرسور څخه د هوا د نلی لپاره د نښلولو نقطه.

4. ترتیب کول

۵.۲ د هوا کمپرسور سره نښلول

1. ډاډ ترلاسه کړئ چې ستاسو د هوا کمپرسور بند دی او فشار یې کم شوی دی.
2. Connect a suitable air hose (not included) to the tool's air inlet. Ensure the connection is secure to prevent air leaks.
3. Set the air compressor's regulator to the recommended operating pressure of 4.1 to 6.9 bar (60-100 psi).
4. Turn on the air compressor and allow it to reach the set pressure.

۴.۲ د سټپلونو بارول

Always disconnect the air supply before loading staples.

1. د هوا نلی د سټیپلر څخه جلا کړئ.
2. Locate the quick-release loading system at the bottom of the magazine.
3. د مجلې فالوور بیرته کش کړئ تر هغه چې په خپل ځای کې بند شي.
4. Insert a strip of Type 80 staples (4-16mm) into the magazine with the staple points facing down.
5. Release the magazine follower, allowing it to push the staples forward. Ensure staples are seated correctly.
6. Reconnect the air hose. The tool is now ready for operation.

Figure 3: Loading staples into the magazine.

5. عملیاتي لارښوونې

The A8016LN operates with a sequential firing mode for precise staple placement.

1. Ensure the air supply is connected and the pressure is within the recommended range.
2. د سټیپلر پوزه په کلکه د ورک پیس په وړاندې ځای په ځای کړئ چیرې چې سټیپل باید چلول شي.
3. Press the trigger to fire a staple. The sequential firing mechanism requires the nose to be depressed against the surface before the trigger can be pulled.
4. After each staple, lift the tool from the workpiece and reposition for the next staple.
5. Always maintain a firm grip and control of the tool during operation.

Figure 4: Stapling fabric to a wooden frame.

Figure 5: Applying staples to a chair during upholstery.

6. ساتنه

منظم ساتنه ستاسو د سټیپلر اوږد عمر او غوره فعالیت تضمینوي.

• ورځنی غوړول: Apply a few drops of pneumatic tool oil (included) into the air inlet before each use. This lubricates internal components.
• پاکول: Keep the tool clean and free from dust and debris. Use a clean, dry cloth. Do not use solvents that may damage plastic parts.
• د هوا فلټر: Periodically check and clean the air filter on your compressor to ensure a clean air supply to the tool.
• ذخیره کول: When not in use, disconnect the air supply and store the tool in its carrying case in a dry, secure location, away from children.
• د فاسټینر مطابقت: Always use Tacwise Type 80 staples for best results and to prevent tool damage.

Figure 6: Use of correct Type 80 staples is essential for proper function.

7. ستونزه حل کول

دا برخه هغه عامې ستونزې په ګوته کوي چې تاسو یې د خپل نیوماتیک سټیپلر سره مخ کیدی شئ.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Tacwise customer support.

8. مشخصات

Technical details for the Tacwise A8016LN Pneumatic Upholstery Stapler:

• د ماډل شمیره: A8016LN
• د پوستکي ډول: د 80 ډول
• د ستنې اوږدوالی: 4-16 ملي متره
• د مجلې ظرفیت: 150 ستنې
• عملیاتي فشار: 4.1 - 6.9 bar (60-100 psi)
• وزن: 1.1 کیلو ګرامه
• ابعاد (L x W x H): نږدې 28 x 7 x 26.5 سانتي متره
• مواد: مګنیزیم
• Firing Mode: Sequential (Single)
• د وایبریشن اخراج: 1.6 m/s²

Figure 7: Dimensions of the A8016LN stapler.

9. تضمین او ملاتړ

For warranty information, technical support, or to purchase replacement parts, please refer to the official Tacwise webسایټ ته مراجعه وکړئ یا د دوی د پیرودونکو خدماتو څانګې سره اړیکه ونیسئ. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.

د اړیکو معلومات: مهرباني وکړئ لیدنه وکړئ Tacwise Brand Store for further assistance and product information.