SparkFun USB to TTL Serial Cable (BC75116) Instruction Manual

1. پیژندنه

This manual provides instructions for the SparkFun USB to TTL Serial Cable, Model BC75116. This cable offers a direct method to connect devices with TTL serial interfaces to a computer via a USB port. It is specifically configured for 3.3V operation, making it suitable for use with devices such as the Raspberry Pi for power, communication, and accessing debug consoles.

2. محصول ختم شوview

The SparkFun USB to TTL Serial Cable is built around an FT232RQ chip, integrated within the USB-A connector. The cable terminates in a 4-pin connector designed for easy connection to various devices.

کلیدي ځانګړتیاوې:

• FT232RQ based USB cable for reliable serial communication.
• 4-pin connector with clearly defined pinout: RX (Brown), TX (Tan-like/Peach), VCC (Red), and GND (Black).
• Operates at 3.3V logic levels, compatible with Raspberry Pi.

Figure 2.1: USB-A connector side of the cable, housing the FTDI chip.

۴. د تنظیم لارښوونې

3.1 د ډرایور نصب کول

Before connecting the cable to your computer, ensure the necessary FTDI drivers are installed. For most modern operating systems (Windows, macOS, Linux), these drivers may install automatically upon first connection. If not, you can download the official FTDI drivers from the د ‏‎FTDI webسایټ.

3.2 فزیکي اړیکه

1. کمپیوټر سره وصل کړئ: د کیبل USB-A نښلونکی په خپل کمپیوټر کې موجود USB پورټ کې ولګوئ.
2. د پنونو پیژندنه: The other end of the cable features a 4-pin connector. Carefully identify each pin based on its color and label:
   • نصواري: RX (معلومات ترلاسه کول)
   • Tan-like/Peach: TX (د معلوماتو لیږدول)
   • سور: VCC (د بریښنا رسولو)
   • تور: GND (ځمکه)
3. وسیله سره وصل کړئ: Connect these pins to the corresponding serial pins on your target device (e.g., Raspberry Pi). Ensure correct polarity and pin matching (RX to TX, TX to RX, VCC to VCC, GND to GND).

شکل 3.1: مفصل view of the 4-pin connector showing pin labels (GND, RXD, TXD, VCC) and wire colors.

مهمه یادونه: While the I/O pins (RX, TX) operate at 3.3V, the VCC pin typically supplies 5V from the USB port. Always verify the voltage requirements of your target device before connecting the VCC pin to avoid damage.

4. عملیاتي لارښوونې

Once the drivers are installed and the cable is physically connected, your computer should recognize the cable as a virtual COM port. You can then use any serial terminal program (e.g., PuTTY, Tera Term, minicom) to communicate with your connected device.

1. Identify COM Port: Check your computer's Device Manager (Windows) or /dev/ttyUSB* (Linux) to identify the assigned COM port number.
2. د ټرمینل سافټویر تنظیم کړئ: Open your preferred serial terminal software and configure it with the correct COM port, baud rate, data bits, parity, and stop bits as required by your target device. Common settings include 115200 baud, 8 data bits, no parity, 1 stop bit.
3. اړیکه ټینګه کړئ: Open the serial connection in your terminal software. You should now be able to send and receive data from your connected device.

5. ساتنه

The SparkFun USB to TTL Serial Cable requires minimal maintenance. Follow these guidelines to ensure its longevity:

• Store the cable in a clean, dry environment away from extreme temperatures.
• Avoid bending or kinking the cable excessively, especially near the connectors.
• Do not expose the cable to moisture or corrosive substances.
• Clean the connectors gently with a dry, lint-free cloth if necessary.

6. ستونزه حل کول

• د وسیلې پیژندنه نشته:
  • Ensure FTDI drivers are correctly installed. Try reinstalling them from the official FTDI webسایټ
  • په خپل کمپیوټر کې یو بل USB پورټ هڅه وکړئ.
  • Verify the cable is securely plugged into both the computer and the target device.
• Communication Errors / Corrupted Data:
  • Double-check the baud rate, data bits, parity, and stop bits settings in your serial terminal software. These must match the target device's configuration.
  • Verify the RX and TX pins are correctly cross-connected (cable RX to device TX, cable TX to device RX).
  • Ensure the ground (GND) connections are solid between the cable and the device.
  • If experiencing persistent issues, especially at higher data rates, consider using the FTDI's FT_PROG utility to adjust internal settings. Some users have reported improved reliability by changing the current request to 140mA and enabling "High Current I/O's" if the default 90mA is insufficient for the application.
• Device Not Powering On (when using VCC):
  • Confirm that your device is designed to be powered by a 5V VCC supply, as the VCC pin on this cable typically provides 5V, even though the data lines are 3.3V. Connecting 5V to a 3.3V-only power input can damage your device.
  • Ensure the VCC and GND pins are correctly connected to your device's power input.

7. مشخصات

8. د تضمین معلومات

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official SparkFun webسایټ ته مراجعه وکړئ یا د دوی د پیرودونکو ملاتړ سره اړیکه ونیسئ. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.

9. د پیرودونکي ملاتړ

If you encounter any issues or have questions regarding the SparkFun USB to TTL Serial Cable, please visit the official SparkFun website for support resources, FAQs, and contact information. You may also find helpful community forums and documentation online.