پیژندنه
The TC Electronic T2 Reverb effects pedal provides a diverse range of reverb effects for guitar and other instruments. This manual details the pedal's features, setup procedures, operational guidelines, maintenance tips, troubleshooting steps, and technical specifications to ensure optimal performance.
محصول پای ته ورسیدview
The T2 Reverb pedal features intuitive controls for shaping your sound and a robust design for reliable use. Familiarize yourself with the pedal's components:
- د خرابېدو غوټۍ: Controls the length of the reverb tail.
- ټون غوټۍ: Adjusts the brightness or darkness of the reverb.
- مکس نوب: Balances the ratio between the dry (unaffected) signal and the wet (effected) signal.
- Reverb Type Selector: A rotary switch to select from various reverb algorithms (I-VIII, E1, E2, TP).
- د پښو سویچ: اغېزمنتوب یا له پامه غورځوي.
- ننوتۍ / وتلو جیکس: For connecting your instrument and ampلايف
- د بریښنا ننوتل: For connecting a 9V DC power supply.
چمتو کول
- د بریښنا پیوستون: Connect a 9V DC power adapter (center negative, not included) to the power input jack. Alternatively, the pedal can be powered by a 9V battery (not included) by opening the battery compartment.
- د وسیلې اړیکه: Connect your instrument (e.g., guitar) to the input jack on the right side of the pedal using a standard 1/4-inch instrument cable.
- Ampد ژوند کولو اړیکه: د محصول جیک د پیډل ښي خوا ته خپل سره وصل کړئ amplifier's input using a standard 1/4-inch instrument cable.
- Stereo Operation (Optional): For stereo output, connect the second output jack to a second ampلایفیر یا سټیریو ان پټ وسیله.
ډاډ ترلاسه کړئ چې ستاسو د بریښنا کولو دمخه ټولې اړیکې خوندي دي amplifier and pedal.
عملیاتي لارښوونې
بنسټیز عملیات
- پاور آن: Once connected, press the footswitch to engage the effect. The LED indicator will illuminate. Press again to bypass the effect.
- Selecting Reverb Type: Rotate the Reverb Type Selector knob to choose from the available reverb algorithms (I through VIII, E1, E2). Each setting offers a distinct reverb character.
- Adjusting Reverb Parameters:
- د کارولو DECAY knob to control the duration of the reverb.
- د کارولو ټون knob to adjust the frequency content of the reverb, making it brighter or darker.
- د کارولو MIX knob to blend the dry signal with the reverb effect. A higher setting increases the effect's prominence.
TonePrint Feature
The "TP" setting on the Reverb Type Selector activates the TonePrint feature. TonePrint allows you to upload custom-tuned reverb sounds created by artists or design your own using the TC Electronic TonePrint app. Connect your pedal to a computer via USB (cable not included) or beam TonePrints wirelessly from your smartphone to the pedal's pickup.
ساتنه
- پاکول: د پیډل بهرنۍ برخه پاکولو لپاره نرم، وچ ټوکر وکاروئ. د کثافاتو پاکوونکو یا محلولونو څخه ډډه وکړئ.
- د بیټرۍ بدلول: If using battery power, replace the 9V battery when the LED indicator dims or the effect performance degrades. To replace, open the battery compartment on the underside of the pedal.
- ذخیره کول: Store the pedal in a dry environment, away from extreme temperatures and direct sunlight, when not in use. Disconnect power and remove the battery if storing for extended periods.
د ستونزو حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| هیڅ غږ یا ضعیف سیګنال نشته | Incorrect cable connections, dead battery, faulty power supply, volume knobs on instrument/amp رد کړ. | Check all cable connections. Replace battery or verify power supply. Ensure instrument and amplifier volumes are set appropriately. |
| ناغوښتل شور او غوغا | Ground loop, faulty cables, interference from other electronics, improper power supply. | Use shielded cables. Try a different power outlet or isolated power supply. Move pedal away from other electronic devices. |
| Effect not engaging (LED off) | No power, faulty footswitch. | Verify power connection and battery status. If problem persists, contact support. |
| TonePrint not loading | Incorrect app usage, connection issues. | Ensure the TonePrint app is updated and the pedal is correctly connected (USB or beaming). Refer to the TonePrint app's instructions for detailed guidance. |
مشخصات
- ماډل: T2
- د توکي وزن: ۱ پونډ (تقریبا ۴۵۴ ګرامه)
- د محصول ابعاد: 4.61 x 2.48 x 2.91 انچه (11.7 x 6.3 x 7.4 سانتي متره)
- د بریښنا سرچینه: 9V DC (center negative) power adapter or 9V battery
- والیtage: 9 ولټه
- د سیګنال بmatه: انلاګ
- د هارډویر انٹرفیس: د HP-HSC
تضمین او ملاتړ
TC Electronic products are covered by a limited warranty. For detailed warranty information, product support, or service inquiries, please visit the official TC Electronic webسایټ ته مراجعه وکړئ یا مستقیم د دوی د پیرودونکي ملاتړ سره اړیکه ونیسئ. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.
رسمي Webسایټ: www.tcelectronic.com