Paslode 513000
د پاسلوډ ۵۱۳۰۰۰ کمپیکٹ فریمر لارښوونې لارښود
ماډل: 513000
برانډ: پاسلوډ
1. پیژندنه
This instruction manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Paslode 513000 Compact Framer. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage.
The Paslode Compact Framing Nailer is designed for framing applications, offering maneuverability and power in tight spaces. Its lightweight design contributes to reduced user fatigue during extended use.
2. د خوندیتوب معلومات
WARNING: Failure to follow these safety instructions could result in serious personal injury or property damage.
- Always wear ANSI Z87.1 approved safety glasses with side shields when operating or performing maintenance on the tool.
- Wear hearing protection to prevent noise-induced hearing loss.
- Never point the tool at yourself or others, whether loaded or unloaded.
- Disconnect the air supply before clearing jams, performing maintenance, or leaving the tool unattended.
- Ensure the work area is clear of bystanders and obstructions.
- په وړاندیز شوي فشار کې یوازې پاکه، وچه، تنظیم شوي کمپریس شوي هوا وکاروئ.
- که چیرې وسیله زیانمنه شوې وي یا خرابه شوې وي، نو مه یې چلوئ.
- لاسونه او د بدن برخې د وسیلې د خارجیدو ساحې څخه لرې وساتئ.
3. محصول ختم شوview
The Paslode 513000 Compact Framer is engineered for efficiency and ease of use. Key features include:
- د لږ وزن ډیزاین: Only 5.9 lbs with a soft grip handle for comfort.
- Precise Nailing: Great line-of-sight and aggressive nosepiece for precise toe-nailing.
- اغیزمن عملیات: Works in bump fire mode for speed on job site.
4. ترتیب کول
۴.۱ د هوا رسولو سره نښلول
- Ensure your air compressor is set to the recommended operating pressure (typically 80-120 PSI).
- Connect a clean, dry air hose to the tool's air inlet. Ensure the connection is secure to prevent air leaks.
- Check all air connections for leaks before operation.
۴.۲ د فاسټینرونو بارول
- ډاډ ترلاسه کړئ چې وسیله د هوا رسولو څخه جلا شوې ده.
- Pull back the magazine follower until it locks into place.
- Insert a strip of Paslode framing nails into the magazine, ensuring the nails are oriented correctly with the points facing forward.
- Release the magazine follower, allowing it to push the nails forward into the nosepiece.
5. عملیاتي لارښوونې
۵.۱ د ډزو طریقې
The Paslode 513000 supports bump fire mode for rapid fastening:
- Bump Fire Mode: Hold the trigger down and press the nosepiece against the workpiece to drive a nail. Lift the tool and press again to drive another nail. This mode is ideal for high-speed applications like sheathing or decking.
۵.۲ د میخونو وهلو پروسه
- Ensure proper safety gear is worn.
- وسیله د هوا رسولو سره وصل کړئ.
- Place the nosepiece firmly against the workpiece at the desired nailing location.
- Depress the trigger to drive a nail. For bump fire, keep the trigger depressed and repeatedly press the nosepiece against the surface.
- Maintain a firm grip on the tool and control its recoil.
6. ساتنه
Regular maintenance ensures the longevity and optimal performance of your Paslode 513000 Compact Framer.
۷.۰ ورځني چکونه
- Inspect the tool for any visible damage, loose screws, or worn parts.
- Check for air leaks around connections and seals.
- Ensure the nosepiece and driver blade are clean and free of debris.
- Verify that the trigger and safety mechanisms operate smoothly.
6.2 غوړول
Apply a few drops of pneumatic tool oil into the air inlet daily before use. This lubricates internal components and prevents corrosion.
6.3 پاکول او ذخیره کول
- Keep the tool clean and free of dirt, dust, and debris. Use a dry cloth or compressed air for cleaning.
- وسیله په وچ او خوندي ځای کې وساتئ چې د مستقیم لمر وړانګو او سختې تودوخې څخه لرې وي.
- Disconnect the air supply and empty the magazine before storing.
7. ستونزه حل کول
This section addresses common issues you might encounter with your Paslode 513000 Compact Framer.
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| Tool not firing or weak firing | Low air pressure; Air leaks; Insufficient lubrication; Worn O-rings. | Increase air pressure to recommended PSI; Check and seal air connections; Apply pneumatic tool oil; Consult a qualified technician for O-ring replacement. |
| Nails jamming in magazine or nosepiece | Incorrect nail size/type; Damaged nails; Debris in magazine; Worn driver blade. | Use only recommended Paslode nails; Inspect nails for damage before loading; Clear debris from magazine and nosepiece (disconnect air first); Consult a qualified technician for driver blade replacement. |
| Air leaking from tool | خلاص فټینګونه؛ زیانمن شوي O- حلقې یا مهرونه. | Tighten all air fittings; Consult a qualified technician for seal/O-ring replacement. |
If the problem persists after attempting these solutions, contact Paslode customer support or a certified service center.
8. مشخصات
| صفت | تفصیل |
|---|---|
| جوړونکی | پاسلوډ |
| برخه شمیره | 513000 |
| د ماډل شمیره | 513000 |
| د محصول ابعاد | 16.51 x 35.56 x 35.56 سانتي متره |
| د توکي وزن | 1.89 کیلوګرام (نږدې 5.9 پونډه) |
| اندازه | Compact Pneumatic Framing Nailer |
| رنګ | Orange, Silver, Black |
| مواد | فلزي |
| د بریښنا سرچینه | د هوا په واسطه چلول شوی |
| شاملې برخې | واحد، د لارښوونې لارښود |
| نیټه لومړی شتون لري | د ۲۰۲۰ کال د اګست ۱۵مه |
9. تضمین او ملاتړ
9.1 د تضمین معلومات
The Paslode 513000 Compact Framer comes with a د 90 ورځو محدود تضمین. دا تضمین د عادي استعمال لاندې موادو او کاریګرۍ نیمګړتیاوې پوښي. مهرباني وکړئ د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.
9.2 د پیرودونکي ملاتړ
For technical assistance, parts, or warranty service, please contact Paslode customer support. Refer to the official Paslode website or the packaging for the most current contact information.
د نورو معلوماتو لپاره، تاسو کولی شئ لیدنه وکړئ Paslode official webسایټ.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.