Danco 10773

DANCO VersiTech Cartridge 10773 User Manual

For Glacier Bay, AquaSource, and PurePro Tub and Shower Faucets

1. محصول ختم شوview

The DANCO VersiTech Cartridge 10773 is designed as a replacement component for leaky tub and shower faucets. Constructed from durable plastic, this cartridge ensures reliable performance and is compatible with hot and cold water applications. It is specifically engineered to fit Glacier Bay, AquaSource, and PurePro faucet models, offering a practical solution to extend the life of your existing faucet without requiring a full replacement.

DANCO VersiTech Cartridge 10773
مخکی view of the DANCO VersiTech Cartridge 10773, showing its general shape and brass stem.
اړخ view of cartridge
اړخ view of the cartridge, highlighting its plastic body and connection points.
لاندې view of cartridge
لاندې view of the cartridge, showing the water inlets and outlets.
پورته view of cartridge
پورته view of the cartridge, displaying the internal mechanism and hot/cold indicators.

2. ترتیب او نصب کول

Before beginning installation, ensure the main water supply to your home is turned off to prevent water damage. Gather necessary tools such as a screwdriver, adjustable wrench, and possibly a cartridge puller.

  1. د نل لاستی لرې کړئ: Carefully remove the screw securing the faucet handle. This screw is often located under a decorative cap. Once the screw is removed, pull the handle off.
  2. Removing faucet handle screw
    A hand using a screwdriver to remove the screw from the center of a chrome faucet handle, preparing for cartridge access.
  3. Remove Trim Plate: Unscrew and remove the decorative trim plate (escutcheon) to expose the cartridge housing.
  4. زوړ کارتوس استخراج کړئ: Depending on your faucet model, you may need a cartridge puller tool to remove the old cartridge. Grip the stem of the old cartridge and pull it straight out. Note the orientation of the old cartridge for correct installation of the new one.
  5. Removing old faucet cartridge
    A hand holding a removed faucet cartridge, with the exposed faucet opening visible in the background, illustrating the removal process.
  6. پاک کور: Inspect the inside of the faucet body for any debris or mineral buildup. Clean thoroughly to ensure a proper seal for the new cartridge.
  7. نوی کارتریج نصب کړئ: Insert the new DANCO VersiTech Cartridge 10773 into the faucet body, ensuring it is correctly aligned. The hot and cold indicators (red and blue) on the cartridge should typically align with the corresponding markings on the faucet body or your desired hot/cold orientation.
  8. Inserting new faucet cartridge
    A hand carefully inserting a new faucet cartridge into the faucet body, ensuring proper alignment.
  9. د نل بیا راټولول: Reattach the trim plate and secure it with screws. Place the faucet handle back onto the stem and tighten its screw.
  10. Reassembled faucet
    A fully reassembled tub and shower faucet, ready for use after cartridge replacement.
  11. د اوبو رسولو بیا رغونه: Slowly turn the main water supply back on. Check for any leaks around the faucet.

For additional guidance on identifying the correct replacement part or detailed installation videos, you may visit the Danco Leaky Faucet Guide.

3. عملیات

The DANCO VersiTech Cartridge 10773 controls the flow and temperature of water in your tub and shower faucet. Once installed, the faucet handle will operate as designed by the original manufacturer, allowing you to adjust water temperature and volume. The cartridge is designed to handle both hot and cold water applications effectively.

4. ساتنه

To ensure the longevity and optimal performance of your DANCO VersiTech Cartridge, regular maintenance is recommended:

  • منظم پاکول: Periodically clean the faucet exterior and handle with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals that can damage the finish.
  • د لیکونو لپاره چیک کړئ: Regularly inspect the faucet for any signs of dripping or leaks. Addressing minor leaks promptly can prevent further damage and water waste.
  • د اوبو کیفیت: In areas with hard water, mineral deposits can accumulate over time. If water flow becomes restricted or temperature control is affected, the cartridge may need to be inspected or replaced.

5. ستونزه حل کول

If you encounter issues after installing the DANCO VersiTech Cartridge, consider the following troubleshooting steps:

  • لیکیدونکې نل: If the faucet continues to leak after cartridge replacement, ensure the cartridge is fully seated and properly aligned. Check for any debris in the cartridge housing that might prevent a tight seal. Verify that the O-rings on the cartridge are intact and correctly positioned.
  • ګرمې یا سړې اوبه نشته: If only hot or cold water is flowing, or if temperature control is erratic, check the orientation of the cartridge. The hot and cold indicators (red and blue) must be correctly aligned with the faucet's internal channels.
  • د اوبو ټیټ فشار: Reduced water pressure might indicate a blockage. Remove the cartridge and inspect it and the faucet body for any mineral buildup or debris.
  • د لاس کلک عملیات: If the handle is difficult to turn, ensure all components are properly lubricated (using plumber's grease suitable for potable water) and that no parts are overtightened.

6. مشخصات

فیچرتفصیل
برانډدانکو
د ماډل شمیره10773
موادپلاستیک
مطابقتGlacier Bay, AquaSource, PurePro faucets
ځانګړي ځانګړتیاوېLeak Elimination, Low Lead Compliance
د توکي وزن6.4 اونس
د محصول ابعاد5.25 x 1.5 x 1.5 انچه
Water Applicationګرم او سړه

7. تضمین او ملاتړ

The DANCO VersiTech Cartridge 10773 comes with a د 1 کال محدود تضمین. For warranty claims or technical support, please refer to the contact information provided by Danco or your product retailer. Keep your purchase receipt as proof of purchase.

For further assistance or to find other Danco products, visit the official Danco Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.