پیژندنه
This manual provides essential instructions for the safe and correct installation, operation, and maintenance of the Geberit G243173001 Water Supply Hose. This hose is specifically designed to connect the water supply to the Geberit Duofix Carrier 111.798, which is used with bidet seats. Please read this manual thoroughly before installation and keep it for future reference.
د خوندیتوب معلومات
- د نلونو د لګولو کار پیل کولو دمخه تل د اوبو اصلي رسولو بند کړئ.
- Ensure all connections are hand-tightened first, then gently tightened with a wrench to prevent leaks without overtightening.
- Inspect the hose and connections regularly for any signs of wear, damage, or leaks.
- که تاسو د کوم ګام په اړه ډاډه نه یاست، نو د وړ نل لیکونکي سره مشوره وکړئ.
د بسته محتويات
The Geberit G243173001 package includes:
- 1 x Geberit G243173001 Water Supply Hose
No additional tools or components are included with this product.
مشخصات
| ماډل | G243173001 |
| برانډ | Geberit |
| مواد | ربړ |
| د توکي وزن | 3.04 اونس |
| ځانګړی کارول | Water supply connection for Geberit Duofix Carrier 111.798 |
تنظیم او نصب کول
Before you begin, ensure the main water supply to the toilet area is turned off. You may need a wrench for tightening connections.
- ساحه چمتو کړئ: Turn off the main water supply valve. Flush the toilet to drain the tank and bowl.
- د اړیکې نقطې وپیژنئ: The Geberit G243173001 hose has two distinct ends. One end connects to the water supply valve, and the other connects to the Geberit Duofix Carrier 111.798.
- د اوبو رسولو سره وصل شئ: Carefully attach one end of the hose to the water supply valve. Hand-tighten first, then use a wrench for a quarter to half turn until snug. Do not overtighten.
- Connect to Duofix Carrier: Attach the other end of the hose to the designated water inlet on the Geberit Duofix Carrier 111.798. Hand-tighten, then use a wrench for a snug fit.
- وروستی چک: ډاډ ترلاسه کړئ چې دواړه اړیکې خوندي دي.
Image: Water supply connection point of the hose.
Image: Carrier connection point of the hose.
انځور: اوورview of the Geberit G243173001 Water Supply Hose.
عملیات
After installation, slowly turn on the main water supply valve. Check all connections for leaks immediately. If no leaks are present, the system is ready for use with the Geberit Duofix Carrier and connected bidet seat.
ساتنه
- Periodically inspect the hose and its connections for any signs of wear, cracks, bulges, or corrosion.
- Check for any drips or moisture around the connection points. Address any leaks promptly.
- Replace the hose if any damage is observed to prevent potential water damage.
د ستونزو حل کول
په اتصالاتو کې لیکونه
- لامل: Loose connection or damaged washer/gasket.
- حل لاره: Turn off water supply. Gently tighten the connection with a wrench. If the leak persists, check the washer/gasket inside the connector for proper seating or damage. Replace if necessary.
د اوبو جریان نشته
- لامل: Water supply valve is off or partially closed.
- حل لاره: Ensure the main water supply valve and any inline shut-off valves are fully open.
د تضمین معلومات
For detailed warranty information regarding the Geberit G243173001 Water Supply Hose, please refer to the official Geberit website or contact Geberit customer service directly. Warranty terms and conditions may vary.
د پیرودونکي ملاتړ
If you have any questions, require technical assistance, or need to order replacement parts, please visit the official Geberit website or contact their customer support department. Contact details can typically be found on the Geberit webسایټ یا د محصول بسته بندي.