ARRIS C250 V2 250mm RC Quadcopter FPV Racing Drone

پیژندنه

This manual provides essential information for the safe and effective operation of your ARRIS C250 V2 250mm RC Quadcopter FPV Racing Drone. Please read this manual thoroughly before operating the drone to ensure proper setup, flight, and maintenance. The ARRIS C250 V2 is a high-performance FPV racing drone designed for experienced users.

د خوندیتوب لارښوونې

• Always operate the drone in open areas, away from people, animals, buildings, and obstacles.
• Maintain a safe distance from the drone during flight.
• د هوايي ډګرونو ته نږدې یا په محدوده فضا کې الوتنه مه کوئ. د الوتنې دمخه سیمه ایز مقررات وګورئ.
• Ensure the battery is fully charged and securely mounted before each flight.
• Inspect propellers for damage before each flight. Replace any damaged propellers immediately.
• Never attempt to catch the drone while its propellers are spinning.
• په تیزو بادونو یا د هوا په ناوړه شرایطو کې له الوتنې ډډه وکړئ.
• لاسونه او مخ د څرخيدونکو پروپیلرونو څخه لرې وساتئ.
• This product is not a toy and is intended for adult use only.

محصول پای ته ورسیدview او اجزا

The ARRIS C250 V2 is an advanced FPV racing drone featuring a robust design and integrated electronics for optimal performance. Key components include:

• ARRIS C250 V2 Frame
• Radiolink AT9 Transmitter and Receiver
• ARRIS 4S 1500mAh LiPo Battery
• ARRIS X2205 2300KV Brushless Motors
• Flycolor S-Tower 4-in-1 ESC + F3 Flight Controller + OSD + PDB
• ARRIS 5042 3-blade Propellers
• ARRIS XAT700M FPV Mini Camera
• 5.8G FPV Video Transmitter (TX) and Antenna
• بزر

شکل 1: پایview of the ARRIS C250 V2 FPV Racing Drone with key components labeled, including motors, propellers, battery, FPV camera, and video transmitter.

شکل 2: مفصل view highlighting the XT60 Female Plug, 4-in-1 ESC with FC, PDB Tower, and the 5.8G FPV Racing TX Antenna.

Figure 3: Close-up of the integrated Flycolor S-Tower, showing the F3 Flight Controller with On-Screen Display (OSD) and the 30A 4-in-1 ESC Board.

Figure 4: The ARRIS FPV Mini Camera, demonstrating its adjustable angle feature for optimal FPV viewing.

شکل ۱: پورته څخه ښکته view illustrating the 254mm motor-to-motor diagonal distance of the ARRIS C250 V2 frame.

شکل 6: اړخ view highlighting the super narrow 23mm arms and the placement of the ARRIS FPV Racing 5.8G TX Antenna.

شکل ۲.۲: مخکینۍ او شاته views of the assembled ARRIS C250 V2 drone, showcasinد هغې کمپیکټ ډیزاین.

Figure 8: The ARRIS C250 V2 drone positioned in a grassy outdoor environment, ready for flight.

Figure 9: The complete package contents, including the ARRIS C250 V2 drone, Radiolink AT9 transmitter, 4S 1500mAh LiPo battery, and spare propellers.

چمتو کول

.1... د بیټرۍ چارج کول

The ARRIS C250 V2 includes a 4S 1500mAh LiPo battery. A compatible LiPo battery charger (e.g., Skyrc Imax B6AC V2, not included) is required. Always charge the battery in a fire-safe location and never leave it unattended during charging. Follow the instructions provided with your battery charger for safe operation.

2. Transmitter Setup (Radiolink AT9)

Your drone comes pre-bound to the Radiolink AT9 transmitter. Familiarize yourself with the transmitter's controls and switches. The default configuration typically includes:

• وسله کول/بې وسلې کول: A three-way switch is usually assigned for arming the motors and switching between flight modes (e.g., Level, Acro).
• بزګر: A two-way switch may be assigned to activate the built-in buzzer for locating the drone after a crash.

Refer to the Radiolink AT9 manual for detailed programming and calibration instructions. While the drone is ready-to-fly (RTF), understanding your transmitter's capabilities is crucial for advanced control.

3. د پروپیلر نصب کول

Ensure propellers are installed correctly. Each motor has a specific rotation direction. Match the propellers (clockwise/counter-clockwise) to the corresponding motors as indicated by the motor rotation and propeller markings. Securely fasten the propellers to the motors. Incorrect propeller installation can lead to unstable flight or loss of control.

۱. د الوتنې دمخه چکونه

• ډاډ ترلاسه کړئ چې ټول پروپیلرونه په خوندي ډول وصل دي او زیانمن شوي ندي.
• Confirm the battery is fully charged and properly secured to the drone.
• Check that the FPV camera angle is set to your preference.
• Power on the transmitter first, then connect the drone's battery.
• Perform a range check of the radio control system in a safe area.
• Ensure the FPV video feed is clear and stable before takeoff.

عملیاتي لارښوونې

۵.۱. وسله وال کول او بې وسلې کول

To arm the motors, move the designated arming switch on your Radiolink AT9 transmitter to the 'armed' position. The motors will typically spin slowly, indicating they are ready for flight. To disarm, move the switch back to the 'disarmed' position. Always disarm the drone immediately after landing or in case of an emergency.

۳. د الوتنې طریقې

The ARRIS C250 V2 typically supports multiple flight modes, configurable via the F3 Flight Controller. Common modes include:

• Angle/Level Mode: Provides self-leveling assistance, making it easier for beginners to control.
• Acro/Rate Mode: Offers full manual control without self-leveling, preferred by experienced FPV pilots for racing and freestyle maneuvers.

Switch between modes using the assigned switch on your transmitter. Start with Angle mode if you are new to FPV racing drones.

۲. د الوتنې اساسي کنټرولونه

The Radiolink AT9 transmitter uses standard RC control inputs:

• تروتل (کیڼ اړخ پورته/ښکته): د موټرو سرعت او لوړوالی کنټرولوي.
• Yaw (Left Stick Left/Right): Rotates the drone horizontally.
• Pitch (Right Stick Up/Down): Tilts the drone forward/backward.
• Roll (Right Stick Left/Right): Tilts the drone left/right.

Practice these controls in a simulator or a safe, open area before attempting aggressive maneuvers.

4. FPV System Operation

Power on your FPV goggles or monitor after the drone is powered on. Ensure your FPV receiver is tuned to the correct 5.8GHz channel matching the drone's 5.8G 200mW TX. The OSD (On-Screen Display) integrated into the F3 Flight Controller will provide real-time flight data such as battery voltage, flight time, and current mode directly on your FPV feed.

ساتنه

1. پاکول

Regularly clean your drone to remove dirt, grass, and debris from the frame, motors, and electronics. Use a soft brush or compressed air. Avoid using liquids directly on electronic components.

۳.۳. د پروپیلر بدلول

Inspect propellers before and after each flight for cracks, bends, or chips. Damaged propellers can cause vibrations, reduce efficiency, and lead to unstable flight. Replace them with genuine ARRIS 5042 3-blade propellers.

3. د بیټرۍ پاملرنه

• Store LiPo batteries in a cool, dry place, ideally in a LiPo-safe bag.
• Do not overcharge or over-discharge LiPo batteries.
• Never puncture or damage LiPo batteries.
• If a battery becomes puffed or damaged, discontinue use immediately and dispose of it safely according to local regulations.

4. د فرم ویئر تازه معلومات

Periodically check the ARRIS official website or support forums for firmware updates for the F3 Flight Controller and Flycolor S-Tower. Keeping firmware updated can improve performance and add new features. Follow official instructions carefully when performing updates.

د ستونزو حل کول

• Drone does not arm: Ensure the transmitter is powered on, the drone battery is connected, and the arming switch is correctly engaged. Check for any error messages on the OSD or flight controller LEDs.
• د سیګنال/کنټرول له لاسه ورکول: Ensure your transmitter antenna is properly oriented and not obstructed. Fly within the recommended range. Check for potential radio interference.
• Unstable flight/vibrations: Inspect propellers for damage or incorrect installation. Check motor mounts for looseness. Ensure the flight controller is securely mounted.
• د FPV ویډیو فیډ نشته: Verify the FPV camera and video transmitter are powered on and connected. Ensure your FPV receiver (goggles/monitor) is on the correct channel. Check antenna connections on both the drone and receiver.
• موټور نه ګرځېږي: Check motor connections to the ESC. Inspect the motor for physical damage. If one motor is faulty, it may require replacement.

For more detailed troubleshooting or complex issues, consult online FPV forums, the ARRIS support website, or contact customer service.

مشخصات

تضمین او ملاتړ

For warranty information, technical support, or replacement parts, please refer to the official ARRIS website or contact your retailer. Keep your proof of purchase for warranty claims. Product specifications and features are subject to change without notice.