VOLTCRAFT V-Charge 240 Quadro Multifunction Charger User Manual

1. پیژندنه او وروستهview

The VOLTCRAFT V-Charge 240 Quadro is a versatile multifunction charger designed for ambitious model builders. It supports various battery types, including Li-polymer, LiFePO, Li-ION, LiHV, and NiMH. A key feature is its ability to charge up to four batteries simultaneously, significantly reducing waiting times. Users can freely define battery types and all charging and discharging parameters. The charger operates flexibly with both 11-18V DC input and an integrated 100-240V AC power supply, making it suitable for use at home, on the go, or at the airfield.

Figure 1: VOLTCRAFT V-Charge 240 Quadro charger in operation, connected to a LiPo battery via balance board.

2. د خوندیتوب لارښوونې

Please read and understand all safety instructions before operating the charger. Failure to do so may result in property damage, injury, or fire.

• هیڅکله چارجر بې پامه مه پریږدئ while it is connected to a power source or charging/discharging batteries.
• د چارجر د کار پرمهال د ډیر تودوخې مخنیوي لپاره د چارجر شاوخوا مناسب هوا ورکول ډاډمن کړئ.
• Only charge battery types supported by this charger. Refer to the specifications for compatible battery chemistries and cell counts.
• Always connect batteries with the correct polarity. Incorrect connection can damage the charger and battery.
• Avoid short circuits between charging leads or balance leads.
• Keep the charger and batteries away from water, moisture, flammable materials, and direct sunlight.
• Do not attempt to charge damaged, swollen, or leaking batteries.
• د ماشومانو د لاسرسي څخه لرې وساتئ.
• Use only original or approved charging cables and balance boards.

3. د محصول ب Featuresې

The VOLTCRAFT V-Charge 240 Quadro charger offers the following key features:

• Four Independent Charging Outputs: Allows simultaneous charging of up to four batteries.
• د بیټرۍ پراخه مطابقت: Supports 1-6 cell LiPo, LiFePO, Li-ION, LiHV batteries, and 1-15 cell NiMH/NiCd batteries.
• Asynchronous Power Distribution: Optimizes power delivery across multiple channels.
• User-Definable Parameters: All battery types and charge/discharge settings can be freely configured.
• Dual Power Input: Operates with 11-18V DC (e.g., car battery) or integrated 100-240V AC power supply.
• Integrated Balancer: Ensures individual cell voltage balancing for Lithium-based batteries.
• د چارج کولو څو طریقې: Includes charge, balance charge, fast charge, storage, and discharge modes.

4. د بسته محتويات

مهرباني وکړئ د بسته بندۍ پر مهال د بسته محتويات وګورئ. که کوم توکي ورک یا زیانمن شوي وي، نو خپل پرچون پلورونکي سره اړیکه ونیسئ.

• VOLTCRAFT V-Charge 240 Quadro Multifunction Charger
• د AC بریښنا کیبل
• د DC ان پټ کیبل
• Charging Cables (e.g., XT60, T-Plug)
• د بیلانس بورډونه
• د کارونکي لارښود (دا لاسوند)

5. ترتیب کول

Follow these steps to set up your VOLTCRAFT V-Charge 240 Quadro charger:

5.1 د بریښنا سره وصل کول

1. AC Power (Mains): Connect the supplied AC power cable to the charger's AC input port and then to a suitable wall outlet (100-240V AC).
2. DC Power (12V Source): Alternatively, connect the supplied DC input cable to the charger's DC input port and to a 11-18V DC power source, such as a car battery or a regulated power supply.

The charger will power on and display the initial screen.

5.2 Connecting Batteries

Each of the four charging channels has a main output port and a balance port.

Figure 2: Front panel of the V-Charge 240 Quadro, highlighting the four charging channels with main output and balance ports.

1. Main Charge Leads: Connect the main charging cable (e.g., XT60) from your battery to the corresponding main output port on one of the charger channels. Ensure correct polarity (+ to + and - to -).
2. Balance Leads (for LiXX batteries): For Lithium-based batteries, connect the battery's balance lead to the appropriate balance board, and then connect the balance board to the charger's balance socket for the same channel. This is crucial for safe and balanced charging.
3. Repeat for up to four batteries on separate channels.

6. عملیاتي لارښوونې

Each channel on the V-Charge 240 Quadro operates independently with its own display and control buttons.

۵.۱ په مینو کې نیویګیټ کول

Use the buttons below each display to navigate and set parameters:

• ټایپ: Selects the battery program (e.g., LiPo, NiMH).
• DEC (-): Decreases a value or moves backward in a menu.
• INC (+): Increases a value or moves forward in a menu.
• START/ENTER: Confirms a selection or starts a process. Press and hold to initiate charging/discharging.
• حالت: Displays current charging status and parameters.

۵.۱ د بیټرۍ چارج کول

1. برنامه غوره کړئ: فشار ورکړئ ټایپ button repeatedly until the desired battery chemistry (e.g., LiPo, NiMH) is displayed.
2. پیرامیټونه تنظیم کړئ: د کارولو DEC (-) او INC (+) buttons to adjust parameters such as charge current, cell count (for LiXX), or voltage (for Pb). Ensure these settings match your battery's specifications.
3. Confirm and Start: Once all parameters are set, press and hold the پیل/ننوت button. The charger will perform a pre-check. If safe, it will ask for confirmation. Press پیل/ننوت again to begin charging.
4. د پرمختګ څارنه: During charging, you can press the STATUS button to cycle through various information screens, including current, voltage, charged capacity, and individual cell voltages (for LiXX).
5. بشپړول: The charger will automatically stop when the battery is fully charged and emit an audible alert. Disconnect the battery safely.

6.3 Discharging a Battery

The discharge function allows you to reduce the battery's voltage to a safe storage level or to test its capacity.

1. برنامه غوره کړئ: Navigate to the desired battery type using the ټایپ تڼۍ
2. Select Discharge Mode: د کارولو INC (+) or DEC (-) buttons to find the 'Discharge' option within the selected battery program.
3. پیرامیټونه تنظیم کړئ: Adjust the discharge current and target voltagد اړتیا په صورت کې.
4. Confirm and Start: فشار ورکړئ او ونیسئ پیل/ننوت to begin the discharge process.

7. ساتنه

Proper maintenance ensures the longevity and reliable operation of your charger.

• پاکول: Regularly clean the charger's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no dust or debris accumulates in the ventilation openings.
• ذخیره کول: Store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Disconnect it from all power sources and batteries when not in use.
• د کیبل معاینه: Periodically inspect all cables and connectors for signs of wear, damage, or corrosion. Replace any damaged components immediately.

8. ستونزه حل کول

دا برخه هغه عامې ستونزې په ګوته کوي چې تاسو ورسره مخ کیدی شئ.

9. مشخصات

10. تضمین او ملاتړ

VOLTCRAFT products are manufactured to high-quality standards and come with a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official VOLTCRAFT webد تضمین د تفصيلي شرایطو او مقرراتو لپاره سایټ.

For technical support, troubleshooting assistance, or spare parts, please contact VOLTCRAFT customer service or your authorized dealer. You can typically find contact information on the VOLTCRAFT webسایټ یا ستاسو د محصول بسته بندۍ کې.

آنلاین سرچینې: For additional information, FAQs, and potential firmware updates, please visit the official VOLTCRAFT webسایټ: www.voltcraft.com