PC101 Water Quality Tester Instruction Manual

پیژندنه

The PC101 Water Quality Tester is designed for quick and accurate measurement of pH and Chlorine (CL2) levels in swimming pools, aquariums, and spas. This device provides instant readings, eliminating the need for complex color matching charts. It is an essential tool for maintaining optimal water quality.

Image: The PC101 Water Quality Tester, showing the main handheld unit, the separate probe with two electrodes, and the coiled cable connecting them.

چمتو کول

1. د بیټرۍ نصب کول: The PC101 requires one (1) AA 1.5V Alkaline battery (not included). Open the battery compartment, insert the battery with correct polarity, and close the compartment securely.
2. د پلټنې اړیکه: Ensure the probe is securely connected to the main unit.
3. Initial Adjustment (Chlorine): Before testing chlorine levels, the meter must be adjusted to the "adjustment point." Refer to the operating instructions for detailed steps on this calibration.

عملیاتي لارښوونې

General Usage Notes:

• Do not immerse the probe in any liquid other than pool or spa water.
• Always ensure the probe is clean before and after use.

Testing Chlorine (CL2) Level:

1. چمتووالی: Ensure the unit is powered on and the probe is clean.
2. سمون: Before each chlorine test, adjust the meter to the "adjustment point" as indicated on the device. This typically involves placing the probe in a known solution or following a specific procedure outlined on the device itself (often a dial or switch).
3. ډوبېدل: Carefully immerse the probe into the water you wish to test (pool, spa, aquarium).
4. لوستل: Wait for the reading to stabilize on the large screen. The safe measure range for Chlorine Level is 1.2 to 1.7 ppm.

Testing pH Level:

1. چمتووالی: Ensure the unit is powered on and the probe is clean.
2. ډوبېدل: Carefully immerse the probe into the water you wish to test.
3. لوستل: Wait for the reading to stabilize on the large screen. The safe measure range for pH Level is 7.2 to 7.8.

انځور: نږدې انځور view of the PC101 tester's display, showing the analog scales for pH and Chlorine levels with color-coded indicators for ideal ranges.

ساتنه

• د تفتیش پاکول: After each use, gently rinse the probe with clean water and wipe it dry with a soft cloth. Do not use abrasive materials or harsh chemicals.
• ذخیره کول: Store the PC101 tester in a dry, cool place, away from direct sunlight and extreme temperatures. Ensure the probe is protected from damage.
• د بیټرۍ بدلول: If the display becomes dim or readings are inconsistent, replace the AA 1.5V battery.

د ستونزو حل کول

مشخصات

• ماډل: PC101
• Chlorine Level Safety Range: له 1.2 څخه تر 1.7 ppm
• pH Level Safety Range: له 7.2 څخه تر 7.8 پورې
• د بریښنا رسول: 1 x AA 1.5V Alkaline Battery (not included)
• د اصلي واحد ابعاد: نږدې 190 x 120 ملي متره
• Probe with Handle Length: 150 ملي متره
• Probe (electrode part only) Length: 48 mm (excluding black band)
• د کیبل اوږدوالی: 130 ملي متره
• د ښودلو ځانګړتیاوې: بېسیم

تضمین او ملاتړ

No specific warranty or support information is provided with this product. For any issues, please refer to the troubleshooting section or contact your retailer.