Graco FinishPro HVLP 7.0 Standard Sprayer User Manual

1. د خوندیتوب معلومات

خبرداری: To reduce the risk of injury, the user must read and understand this instruction manual before using this product.

• Avoid eye contact with spray.
• په ښه هوا لرونکي سیمه کې وکاروئ.
• Wear appropriate protective gear, including eye protection, gloves, and a respirator.
• Dispose of chemicals and materials properly according to local regulations.
• تل د پاکولو یا ساتنې ترسره کولو دمخه بریښنا قطع کړئ.
• ډاډ ترلاسه کړئ چې ټولې اړیکې د عملیاتو دمخه خوندي دي.

2. محصول ختم شوview

The Graco FinishPro HVLP 7.0 Standard Sprayer (Model 17N263) is designed for precise application of various coatings, offering control and a high-quality finish. Key features include:

• Ultimate Control: Ideal for projects requiring fine finish.
• د ستنې سیسټم: Includes a #3 size (1.3mm) needle, suitable for lacquers, stains, enamels, epoxies, urethane, and varnish. Needles are easily interchangeable.
• FlexLiner Bag System: Designed for lighter weight, easy cleanup, and ability to spray in any direction, including upside down. Facilitates quick color changes.
• Super-Flex Air Hose: 15% lighter than comparable hoses for improved control.
• TurboControl System: Allows adjustment of the TurboForce turbine speed to match performance requirements.
• EDGE II Gun: Features a 75% lighter trigger pull with EasyGlide technology.
• Standard Filtration System: Washable filter extends motor life and ensures a quality finish.

Figure 2.1: Graco FinishPro HVLP 7.0 Standard Sprayer unit.

Figure 2.2: The EDGE II Spray Gun with the FlexLiner cup system.

3. ترتیب کول

3.1 پیک کول او تفتیش کول

1. په احتیاط سره د بسته بندۍ څخه ټولې برخې لرې کړئ.
2. Inspect all parts for any damage that may have occurred during shipping. Do not operate if damaged.
3. Verify all components listed in the "What's in the Box" section are present.

3.2 مجلس

1. Connect the Super-Flex Air Hose to the HVLP unit and the EDGE II spray gun. Ensure connections are tight.
2. Attach the FlexLiner cup to the spray gun.
3. Select the appropriate needle for your material. The #3 (1.3mm) needle is included for fine finishes.
4. Ensure the filter is clean and properly installed in the unit.

Figure 3.1: The compact design allows for easy transport of the unit.

4. عملیاتي لارښوونې

۵.۲ د موادو چمتو کول

1. Ensure your coating material is properly mixed and free of debris.
2. Pour the prepared material into the FlexLiner bag within the cup. Do not overfill.

4.2 د ترتیباتو تنظیم کول

1. Turn on the HVLP unit.
2. Use the TurboControl System dial to adjust the turbine speed. Higher speeds are generally for thicker materials or faster application.
3. Adjust the material flow knob on the EDGE II gun to control the amount of material being sprayed.
4. Test the spray pattern on a scrap piece of material to ensure desired coverage and finish.

Figure 4.1: Adjust the material flow and air cap for optimal spray pattern.

۵.۲ د سپرې کولو تخنیک

• Maintain a consistent distance from the surface (typically 6-10 inches).
• Move the gun in smooth, even passes, overlapping each pass by about 50%.
• Release the trigger at the end of each pass to avoid excessive material buildup.
• The FlexLiner system allows spraying at various angles, including upside down, for hard-to-reach areas.

Figure 4.2: Maintain consistent motion for an even finish.

Figure 4.3: The FlexLiner system enables spraying in any direction, including upside down.

4.4 Changing Needles and Colors

• To change needles, ensure the unit is off and depressurized. Follow the gun's instructions for needle removal and insertion.
• For quick color changes, remove the current FlexLiner bag and replace it with a new one containing the desired color. This minimizes cleanup between colors.

Figure 4.4: Needles can be changed with a simple click mechanism.

۱۰.۲ د محصول رسمي ویډیوګانې

5. ساتنه

5.1 د سپرییر پاکول

1. After each use, disconnect the power.
2. Remove the FlexLiner bag and dispose of any remaining material properly.
3. Clean the spray gun thoroughly with appropriate cleaning solution (water for latex, solvent for oil-based paints).
4. Clean the needle and air cap.
5. Rinse the FlexLiner cup if reusing, or dispose of it.
6. Clean the exterior of the HVLP unit.

5.2 د فلټر ساتنه

• Regularly inspect the standard filtration system filter.
• Clean the washable filter as needed to maintain optimal airflow and prevent motor strain.
• که چیرې د زیان یا ډیر اغوستلو نښې ښکاره شي، نو فلټر بدل کړئ.

6. ستونزه حل کول

7. مشخصات

• د موډل نوم: FinishPro HVLP 7.0 Standard Series
• د ماډل شمیره: 17N263
• نښه: ګراکو
• د ټانک حجم: 1 کوټه
• رنګ: آبي
• مواد: یوریتان
• د توکي وزن: 18 پونډه
• د نلی اوږدوالی: 240 Inches (20 ft)
• د بریښنا سرچینه: Electric (120V AC, 11 A)
• Max. فشار: 7 psi
• د نوزل ​​اندازه: 1.3mm / 0.051 in (#3 needle)
• Max. جریان: 65 cfm
• Pattern Size: له 1/4 څخه تر 12 انچو پورې
• شاملې برخې: Instruction Guide, EDGE II Spray Gun
• ابعاد (W x H): ۱۷" څراغ x ۱۷" ح

Figure 7.1: Approximate dimensions of the HVLP unit.

8. تضمین او ملاتړ

The Graco FinishPro HVLP 7.0 Standard Sprayer comes with a د 3 کلن محدود تضمین. For warranty claims, technical support, or replacement parts, please refer to the contact information provided in the included Instruction Guide or visit the official Graco webسایټ

د راستنیدو پالیسي: This product is eligible for a 30-day refund/replacement policy from the seller (Amazon).