AUTOOL BT360 12V Battery Load Tester Instruction Manual

1. پیژندنه

The AUTOOL BT360 is a 12V battery load tester designed to analyze the health status of automotive batteries. It performs battery tests, cranking tests, and charging system tests, providing accurate results for various battery types including regular flooded, AGM flat plate, AGM spiral, and Gel batteries. This manual provides detailed instructions for the proper use and maintenance of your BT360 tester.

2. د خوندیتوب معلومات

Always observe the following safety precautions when using the AUTOOL BT360 battery tester:

• Wear appropriate eye protection and protective clothing when working near batteries.
• ډاډ ترلاسه کړئ چې موټر په ښه هوا لرونکي سیمه کې دی.
• Avoid sparks, flames, and smoking near the battery, as batteries can produce explosive gases.
• Do not touch hot engine parts or moving components.
• Keep the tester and cables away from water, oil, and grease.
• د بیټرۍ کل ډاډ ترلاسه کړئamps په خوندي ډول د سم ټرمینلونو سره وصل دي (سور څخه مثبت، تور څخه منفي).
• If battery acid comes into contact with skin or eyes, flush immediately with plenty of water and seek medical attention.

3. محصول ختم شوview

3.1 اجزا

The AUTOOL BT360 package typically includes:

• AUTOOL BT360 Main Unit
• Integrated Testing Cables with Alligator Clamps (سره د مثبت لپاره، تور د منفي لپاره)
• د کارونکي لارښود (دا لاسوند)

Image 3.1: AUTOOL BT360 Battery Tester and its included accessories.

3.2 Tester Unit

انځور 3.2: مخکی view of the AUTOOL BT360 Battery Tester, showing the display and control buttons.

The main unit features an LCD display and four control buttons:

• ESC: Escape/Back button.
• ENT: Enter/Confirm button.
• پورته/ښکته تیرونه: Navigation buttons for menu selection.

3.3 کلیدي ځانګړتیاوې

• Performs Battery Test, Cranking Test, and Charging Test.
• Supports multiple battery types: Regular Flooded, AGM Flat Plate, AGM Spiral, and Gel.
• Wide CCA testing range: 100-2400 CCA.
• Multi-language support for user interface.

Image 3.3: The AUTOOL BT360 supports multiple languages for its user interface.

4. مشخصات

Image 4.1: Physical dimensions of the AUTOOL BT360 Battery Tester.

4.1 Supported Starting Power Supply Standards

Image 4.2: Table showing various starting power supply standards supported by the BT360.

5. ترتیب کول

5.1 پیک کول

Carefully remove the AUTOOL BT360 tester and all accessories from the packaging. Inspect for any signs of damage. If any components are missing or damaged, contact customer support.

۵.۱ د ټیسټر سره نښلول

The BT360 is powered directly by the vehicle's 12V battery. Follow these steps to connect the tester:

1. ډاډ ترلاسه کړئ چې د موټر سوځول بند دي او ټول لوازم بند دي.
2. سره وصل کړئ سور مثبت (+) clamp د ۱۲ ولټ بیټرۍ مثبت (+) ترمینل ته.
3. سره وصل کړئ تور منفي (-) clamp د ۱۲ ولټ بیټرۍ منفي (-) ټرمینل ته.
4. Once connected, the tester will power on automatically.

Image 5.1: The AUTOOL BT360 tester with its integrated testing cables and clamps.

Image 5.2: The BT360 tester connected to a vehicle battery for testing.

6. عملیاتي لارښوونې

After connecting the tester, the main menu will appear. Use the Up/Down arrow buttons to navigate through options and the ENT button to confirm selections. Use the ESC button to go back to the previous screen.

Image 6.1: Various display screens of the AUTOOL BT360, illustrating menu navigation and test result displays.

6.1 د بیټرۍ ازموینه

This function evaluates the overall health of the battery.

1. د اصلي مینو څخه، غوره کړئ د بیټرۍ ازموینه and press ENT.
2. وټاکئ د بیټرۍ ځای: Choose 'In-Vehicle' if the battery is installed in the car, or 'Out-of-Vehicle' if it's removed. Press ENT.
3. وټاکئ د بیټرۍ ډول: Choose the type that matches your battery (e.g., Regular Flooded, AGM Flat Plate, AGM Spiral, Gel). Press ENT.
4. وټاکئ د ازموینې معیار: Choose the standard specified on your battery (e.g., CCA, JIS, DIN). Press ENT.
5. ټاکل د بیټرۍ درجه: Input the CCA value (or equivalent rating) as indicated on your battery label. Use arrow buttons to adjust the value and ENT to confirm.
6. The tester will perform the analysis and display results such as State of Health (SOH), State of Charge (SOC), voltage, internal resistance, and a recommendation (e.g., 'Good Battery', 'Charge', 'Replace').

6.2 کرینکینګ ازموینه

This test analyzes the vehicle's starting system, including the starter motor.

1. د اصلي مینو څخه، غوره کړئ د کرینکینګ ازموینه and press ENT.
2. Follow the on-screen prompts to start the vehicle. The tester will monitor the battery voltagد کرینکینګ پرمهال.
3. Once the test is complete, the display will show cranking voltage, cranking time, and a diagnosis of the starting system's performance.

۵ د چارج کولو ازموینه

This test evaluates the vehicle's charging system, including the alternator and regulator.

1. د اصلي مینو څخه، غوره کړئ د چارج کولو ازموینه and press ENT.
2. Follow the on-screen prompts to rev the engine to a specified RPM (e.g., 2500 RPM for 5 seconds).
3. The tester will measure the charging voltage under load and no-load conditions.
4. The results will indicate the charging system's output, ripple voltage, and overall health (e.g., 'Good', 'Low Output', 'High Output').

7. ساتنه

To ensure the longevity and accuracy of your AUTOOL BT360 tester:

• Clean the tester with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• بیټرۍ په سمه توګه وساتئampپاک او له زنګ څخه پاک دی.
• ټیسټر په وچ، یخ ځای کې وساتئ، د مستقیم لمر وړانګو او سختې تودوخې څخه لرې.
• د وسیلې له مینځه وړلو یا د قوي تاثیراتو تابع کولو څخه ډډه وکړئ.

8. ستونزه حل کول

If you encounter issues with your AUTOOL BT360, refer to the following common problems and solutions:

9. تضمین او ملاتړ

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official AUTOOL webسایټ. د تضمین ادعاوو لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.

جوړونکی: AUTOOL

د لومړي شتون نیټه: د اکتوبر ۲۹، ۲۰۲۳