1. محصول ختم شوview
The Uponor Smatrix Base T-145 is a wired digital room thermostat designed for precise temperature control in heating and cooling systems, particularly underfloor heating. It directly transmits measured values to the Smatrix Base X-145 control module, ensuring efficient and responsive climate management. This thermostat features a clear digital display for easy temperature adjustment and monitoring.

انځور 1.1: مخکی view of the Uponor Smatrix Base T-145 Wired Room Thermostat, showing its square white casing and central rotary dial for temperature adjustment. The 'Uponor' logo is visible at the bottom left.
2. کلیدي ځانګړتیاوې
- Digital Temperature Setting: Allows precise adjustment of the desired room temperature.
- د سافټویر نسخه ښودنه: Shows the software version upon startup.
- شاته سکرین: The display illuminates for 10 seconds after activation for improved visibility.
- د تودوخې/یخولو شاخص: Clearly displays the current operating mode.
- Setback Function: Enables energy-saving temperature reduction during unoccupied periods.
- Setback Temperature Display: Shows the active setback temperature.
- د تودوخې واحد انتخاب: د سیلسیس او فارنهایټ ترمنځ بدل کړئ.
- د بیټرۍ حالت ښودنه: Indicates the status of any internal backup battery or connected sensor batteries.
- Flexible Sensor Options: Supports room temperature (RT), floor sensor with max/min limits (FT), remote sensor (FS), and outdoor sensor (RO) inputs.
- Individual Room Cooling: Capable of managing cooling functions on a room-by-room basis.
3. تخنیکي مشخصات
| برانډ | اپونور |
| د ماډل شمیره | 1086974 |
| رنګ | سپینه (RAL 9016) |
| ابعاد (H x W x D) | 80 x 80 x 26.5 mm |
| د توکي وزن | 120 ګرامه |
| د بریښنا رسول | 4-wire bus (Wired) |
| والیtage | 24 ولټه |
| د ارتباط ټیکنالوژي | تارونه |
| د ساتنې ټولګي | IP 30 |
| موافقت | CE |
| د کنټرولر ډول | لاسي کنټرول |
| د حرارت د کنټرول ډول | ډیجیټل |
| ځانګړي استعمالونه | زیرمه ګرمۍ |
| شاملې برخې | Room thermostat and mounting hardware |
4. د خوندیتوب معلومات
Please read and understand all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or property damage.
- بریښنایی خوندیتوب: Installation must be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure power is disconnected at the main circuit breaker before any wiring work.
- د چاپیریال شرایط: Do not expose the thermostat to direct water spray, excessive humidity, or extreme temperatures outside its operating range. The device has an IP30 protection rating, meaning it is protected against solid objects over 2.5mm but not against water.
- مطلوب استعمال: This thermostat is designed for controlling heating and cooling systems. Do not use it for purposes other than its intended function.
- پاکول: د پاکولو لپاره نرم، وچ ټوکر وکاروئ. د کثافاتو پاکوونکي یا محلولونه مه کاروئ.
5. نصب او تنظیم کول
The Uponor Smatrix Base T-145 thermostat is a wired device requiring connection to an Uponor Smatrix Base X-145 control module via a 4-wire bus system. Professional installation is recommended.
5.1 پورته کول
- د بریښنا قطع کول: Ensure the main power supply to the heating/cooling system is turned off at the circuit breaker before beginning installation.
- د ځای انتخاب: Choose an indoor location on an interior wall, away from direct sunlight, drafts, and heat sources (e.g., lamps, appliances) that could affect temperature readings. Mount at a standard thermostat height (approximately 1.5 meters from the floor).
- تارونه: Connect the 4-wire bus cable from the Smatrix Base X-145 control module to the designated terminals on the T-145 thermostat. Refer to the wiring diagram provided with the Smatrix Base X-145 control module for specific terminal assignments.
- خوندي نصب کول: Use the provided mounting hardware to securely attach the thermostat to the wall.
5.2 ابتدايي ترتیب
- پاور آن: Restore power to the system at the circuit breaker. The thermostat display should illuminate.
- Software Version Check: Upon initial power-up, the software version will briefly display.
- د تودوخې واحد: If necessary, adjust the temperature unit between Celsius and Fahrenheit according to the operating instructions in Section 6.
- د سینسر ترتیب: If using optional floor, remote, or outdoor sensors, ensure they are correctly connected and configured within the Smatrix Base X-145 control module. The thermostat can display readings from these sensors.
6. عملیات
The Uponor Smatrix Base T-145 thermostat provides straightforward control over your room's temperature.
6.1 دحرارت درجه ټاکل
- د مطلوب تودوخې د لوړولو لپاره مرکزي ډایل د ساعت په لور وګرځوئ.
- د مطلوب تودوخې کمولو لپاره مرکزي ډایل د ساعت په مقابل لوري وګرځوئ.
- The digital display will show the set temperature. The backlight will activate for 10 seconds after adjustment.
6.2 د معلوماتو ښودل
- اوسنۍ تودوخه: The main display shows the current room temperature.
- د حرارت درجه تنظیم کړئ: Briefly displayed when adjusting the dial.
- عملیاتي حالت: An icon or text indicates if the system is currently heating or cooling.
- Setback Indicator: If the setback function is active, an indicator will show, along with the setback temperature.
- د بیټرۍ حالت: Displays the status of any internal backup battery or connected sensor batteries.
6.3 Changing Temperature Units (Celsius/Fahrenheit)
Specific instructions for changing temperature units are typically found in the main Smatrix Base X-145 control module manual or accessed via a combination of button presses on the thermostat. Consult the comprehensive system manual for detailed steps.
7. ساتنه
The Uponor Smatrix Base T-145 thermostat requires minimal maintenance to ensure optimal performance.
- پاکول: Periodically wipe the thermostat's exterior with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or excessive moisture.
- د سینسر معاینه: If using external sensors (floor, remote, outdoor), ensure they are free from obstructions and debris that could affect their readings.
- د سیسټم معاینه: Regularly check the overall heating/cooling system for proper operation as per the Smatrix Base X-145 control module manual.
8. ستونزه حل کول
If you encounter issues with your Uponor Smatrix Base T-145 thermostat, refer to the following common problems and solutions:
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| ښودنه خالي ده یا غیر ځواب ورکوونکې ده. | No power to the thermostat or control module. | Check the main power supply and circuit breaker. Ensure the 4-wire bus connection is secure. |
| د تودوخې ناسمه لوستل. | د ترموسټاټ موقعیت چې د مسودو، مستقیم لمر وړانګو، یا د تودوخې سرچینو لخوا اغیزمن کیږي. | Relocate the thermostat if possible, or shield it from interfering elements. Ensure no external sensors are faulty or obstructed. |
| د تودوخې / یخولو سیسټم ځواب نه ورکوي. | Communication issue with Smatrix Base X-145 control module or system fault. | Verify the 4-wire bus connection. Check the Smatrix Base X-145 control module for error indicators. Consult the Smatrix Base X-145 manual for system-level troubleshooting. |
| Setback function not working as expected. | Incorrect configuration in the Smatrix Base X-145 control module. | Review the setback schedule and settings within the Smatrix Base X-145 control module. |
If the problem persists after attempting these solutions, contact Uponor customer support or a qualified HVAC technician.
9. تضمین او ملاتړ
For warranty information, technical support, or service inquiries regarding your Uponor Smatrix Base T-145 Wired Room Thermostat, please refer to the documentation included with your complete Uponor Smatrix system or visit the official Uponor webسایټ. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.
جوړونکی: اپونور
د ماډل شمیره: 1086974
ASIN: B077CLZPJ8