پیژندنه
This manual provides essential instructions for the safe and efficient use of the Perel AC028 Intelligent Charger. This device is specifically designed for charging 12V lead-acid batteries, including Gel, AGM, and EFB types, utilizing a sophisticated 3-stage automatic charging cycle to optimize battery life and performance.
د خوندیتوب لارښوونې
Always read and understand all safety warnings and instructions before operating the charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- This charger is intended for 12V lead-acid batteries (Gel, AGM, EFB) only. Do not use with other battery types.
- Battery charging can produce explosive gases. Ensure adequate ventilation during charging and keep away from flames, sparks, and smoking materials.
- Always disconnect the charger from the mains power supply before making or breaking connections to the battery.
- Avoid charging a frozen battery. Allow it to thaw before attempting to charge.
- چارجر او بیټرۍ د ماشومانو او څارویو له لاسرسي لرې وساتئ.
- Do not expose the charger to rain or excessive moisture. The unit has an IP65 rating, meaning it is protected against dust and low-pressure water jets, but it is not submersible.
- که د بریښنا تار خراب شوی وي، دا باید د تولید کونکي، د خدماتو اجنټ، یا ورته وړ اشخاصو لخوا بدل شي ترڅو د خطر څخه مخنیوی وشي.
د محصول ځانګړتیاوې
- ۴-سtage Automatic Charging Cycle: Ensures optimal charging and extends battery life.
- د بیټرۍ مطابقت: Designed for 12V lead-acid batteries, including Gel, AGM, and EFB types.
- ټاکل شوی محصول: 12 VDC، 1.5 A.
- د IP65 محافظت ټولګي: Provides protection against dust ingress and low-pressure water jets from any direction.
- تړون ډیزاین: د ذخیره کولو او لیږد لپاره اسانه.
مشخصات
| ماډل | AC028 |
| ننوتۍ جلدtage | 220-240VAC |
| فریکونسی | 50/60 Hz |
| د محصول Voltage | 12 VDC |
| د محصول اوسنی | 1.5 A |
| اوسنۍ درجه بندي | 0.25 A |
| ابعاد (L x W x H) | 147 x 72 x 42 mm |
| وزن | 376 ګرامه |
| د IP محافظت ټولګي | IP65 |
| د مطابقت وړ بیټرۍ ډولونه | 12V Lead-Acid (Gel, AGM, EFB) |
| Main Cable Length | 1.5 متر |
| د چارج کیبل اوږدوالی | 1 متر |
چمتو کول
- Ensure the Perel AC028 charger is disconnected from the mains power outlet.
- د سور (+) cl سره وصل کړئamp of the charger to the positive (+) terminal of the 12V lead-acid battery.
- د تور (-) cl سره نښلولamp of the charger to the negative (-) terminal of the 12V lead-acid battery.
- Verify that both connections are secure and properly seated to prevent arcing or poor contact.
- Plug the charger's main power cable into a suitable 220-240 VAC, 50/60 Hz mains power outlet.

عملیاتي لارښوونې
Once connected to the battery and mains power, the charger will automatically initiate its 3-stagد چارج کولو پروسه.
- د بریښنا شاخص: The 'POWER' LED will illuminate when the charger is connected to the mains power supply.
- د چارج کولو شاخص: The 'CHARGING' LED will illuminate when the battery is actively being charged.
- بشپړ شاخص: The 'FULL' LED will illuminate when the battery has reached a full charge. At this point, the charger will switch to a maintenance mode to prevent overcharging.
The charger can remain connected to the battery for extended periods for maintenance charging, ensuring the battery remains at an optimal charge level.

ساتنه
- Regularly inspect the charger's cables, clamps, and casing for any signs of damage, wear, or corrosion. Do not use the charger if any part is damaged.
- Keep the charger clean and free from dust and debris. Use a dry cloth for cleaning. Do not use solvents or abrasive cleaners.
- Store the charger in a cool, dry, and well-ventilated area when not in use.
- Ensure the battery terminals are clean before connecting the charger for optimal contact.
د ستونزو حل کول
The Perel AC028 charger is equipped with error indicators to help diagnose common issues:
| د تېروتنې کوډ | تفصیل | عمل |
|---|---|---|
| F01 | Short circuit / Reverse connection / No connection | Check battery connections for correct polarity (+ to +, - to -). Ensure clamps are securely attached and there is no short circuit. |
| F02 | تړلی اړیکه | تایید کړئ چې بیټرۍ کلamps are tightly connected to the battery terminals. |
| F03 | د بیټرۍ والtage ډیر لوړ | This charger is for 12V batteries. Ensure you are not attempting to charge a battery with a higher nominal voltage. |
| F04 | خراب بیټرۍ | The battery may be severely discharged, damaged, or at the end of its life. It might not be able to accept a charge. Consult a battery specialist. |

تضمین او ملاتړ
For detailed warranty information, terms, and conditions, please refer to the documentation provided with your purchase or visit the official Perel website. For technical support or service inquiries, contact your retailer or the manufacturer's customer service department.