Einhell TC-TC 800 Tile Cutter Instruction Manual

1. محصول ختم شوview

The Einhell TC-TC 800 Tile Cutter is designed for precise and efficient cutting of wall and floor tiles. This robust tool is suitable for various home renovation projects, offering clean cuts with minimal dust thanks to its water cooling system.

کلیدي ځانګړتیاوې:

• Robust Stainless Steel Table: Measuring 395 x 385 mm, it is easy to clean and features an angular scale up to 45° with non-slip feet for stable operation.
• Precise Cutting Guide: Ensures exact and straight cuts. The angle stop is adjustable from -45° to +45° for miter cuts.
• Integrated Water Reservoir: Provides necessary water cooling for the saw blade, protecting it from heat damage.
• د پرې کولو ظرفیت: Maximum cutting height of 14 mm at 45° and 34 mm at 90°.
• د خوندیتوب ساتونکی: A protective guard for the cutting disc ensures user safety from chips and dust.

2. د خوندیتوب لارښوونې

تل د دې بریښنا وسیلې سره چمتو شوي ټول خوندیتوب اخطارونه، لارښوونې، انځورونه او مشخصات ولولئ او پوه شئ. د لاندې لیست شوي ټولو لارښوونو په تعقیب کې پاتې راتلل ممکن د بریښنا شاک، اور، او/یا جدي ټپي کیدو لامل شي.

عمومي خوندیتوب خبرداری:

• مناسب شخصي محافظتي تجهیزات (PPE) واغوندئ په شمول د خوندیتوب عینکې، د اوریدلو محافظت، او دستکشې.
• ډاډ ترلاسه کړئ چې د کار ساحه پاکه، ښه روښانه او له خنډونو څخه پاکه ده.
• د وسیلې د چلولو پرمهال ماشومان او لیدونکي لرې وساتئ.
• Never operate the tool if the power cord or plug is damaged.
• Always disconnect the power supply before making any adjustments, changing accessories, or performing maintenance.
• د موادو د پرې کولو لپاره صحیح تیغ وکاروئ.
• Ensure the water reservoir is adequately filled before operation to prevent overheating of the blade.

3. اجزاوو ختمview

Familiarize yourself with the main components of your Einhell TC-TC 800 Tile Cutter:

• Cutting Table (Stainless Steel)
• Diamond Cutting Disc (180 mm diameter)
• د موټرو واحد
• د اوبو زیرمه
• Cutting Guide with Scale
• Angle Stop (-45° to +45°)
• بلیډ ګارډ
• آن/بند سویچ
• د بار وړلو لاسي

شکل 1: پایview of the Einhell TC-TC 800 Tile Cutter with its main parts.

4. ترتیب کول

Before operating the tile cutter, ensure proper setup for safety and optimal performance.

4.1 پیک کول او تفتیش کول

1. په احتیاط سره د بسته بندۍ څخه ټولې برخې لرې کړئ.
2. Inspect the tool for any signs of damage during transit. Do not operate if damaged.
3. ډاډ ترلاسه کړئ چې ټول لیست شوي اجزا شتون لري.

۳.۱ د اوبو د زیرمې ډکول

The integrated water reservoir is essential for cooling the diamond cutting disc and reducing dust.

1. Locate the water reservoir beneath the cutting table.
2. Fill the reservoir with clean water to the indicated level. Ensure the water pump is submerged.
3. Regularly check the water level during operation and refill as needed.

Figure 2: Filling the water reservoir for wet cutting.

4.3 Adjusting the Cutting Guide and Angle Stop

For accurate cuts, adjust the cutting guide and angle stop as required.

1. The cutting guide with scale ensures straight cuts. Position it according to your desired measurement.
2. For miter cuts, adjust the angle stop between -45° and +45°. Secure it firmly before cutting.

Figure 3: Adjustable angle stop for miter cuts.

5. عملیاتي لارښوونې

Follow these steps for safe and effective tile cutting.

5.1 بریښنا کول / بندول

1. Connect the tile cutter to a suitable power outlet (240 Volts).
2. د چالانولو لپاره، شنه 'آن' تڼۍ کېکاږئ.
3. د بندولو لپاره، سره 'بند' تڼۍ کېکاږئ.

Figure 4: Power switch for turning the machine on and off.

۵.۴ پرې کول

1. Place the tile firmly on the stainless steel cutting table, aligning it with the cutting guide or angle stop as desired.
2. Ensure the water pump is active and water is flowing to the blade.
3. Turn on the tile cutter.
4. Slowly and steadily push the tile through the rotating diamond blade. Avoid excessive force.
5. Once the cut is complete, turn off the tile cutter and wait for the blade to stop before removing the tile.

Figure 5: Demonstrating a tile being cut with the machine.

۴.۴ د محصول رسمي ویډیو: څنګه یې وکاروئ

6. ساتنه

Regular maintenance ensures the longevity and performance of your tile cutter.

۶.۲ د اوبو د ذخیرې پاکول

After each use, clean the water reservoir to prevent buildup of tile dust and debris.

1. د بریښنا رسولو قطع کول.
2. Remove the cutting table or access panel to reach the reservoir.
3. Empty the dirty water and thoroughly clean the reservoir with fresh water.
4. اجزاو بیا راټول کړئ.

6.2 د تیغ بدلول

Replace the diamond cutting disc when it becomes dull or damaged.

1. ډاډ ترلاسه کړئ چې وسیله خلاصه نه ده.
2. د تیغ ساتلو مغز خلاصولو لپاره چمتو شوي وسیله وکاروئ.
3. Carefully remove the old blade and install the new 180 mm diamond cutting disc, ensuring it is correctly oriented.
4. د ساتلو مغز په خوندي ډول ټینګ کړئ.

7. ستونزه حل کول

This section addresses common issues you might encounter with your tile cutter.

8. مشخصات

9. تضمین او ملاتړ

9.1 د تضمین معلومات

This Einhell product comes with a د 2 کلن محدود تضمینمهرباني وکړئ د هر ډول تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.

9.2 د پیرودونکي ملاتړ

For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Refer to the official Einhell webد اړیکو د خورا تازه معلوماتو لپاره سایټ یا ستاسو د محصول بسته بندي.