KeylessOption Keyless Entry Remote Starter Car Key Fob Alarm EZSDEI474V Instruction Manual

پیژندنه

This manual provides comprehensive instructions for the KeylessOption EZSDEI474V Keyless Entry Remote Starter Car Key Fob. This device is designed as a replacement remote for aftermarket alarm and remote start systems. Please read all instructions carefully before attempting to program or use the remote.

مهم: Ensure the FCC ID on your original remote matches EZSDEI474V for compatibility. Programming procedures may vary slightly depending on the specific aftermarket system installed in your vehicle. Refer to your vehicle's owner's manual or the manufacturer's website for additional system-specific details.

محصول پای ته ورسیدview

The KeylessOption EZSDEI474V remote features a durable design with three primary function buttons and one auxiliary button. It is designed to provide reliable keyless entry and remote start functionality for compatible aftermarket systems.

شکل 1: مخکی view of the KeylessOption EZSDEI474V remote key fob, showing the Lock, Unlock, Auxiliary, and Panic buttons. The Panic button is yellow with an asterisk symbol.

د بسته محتويات

ډاډ ترلاسه کړئ چې ستاسو کڅوړه لاندې توکي لري:

• KeylessOption EZSDEI474V Remote Key Fob
• Ring Loop
• CR2032 Lithium Cell Battery (pre-installed)
• Program Guide (this manual)

شکل 2: Image showing the contents of the KeylessOption package: the remote key fob, a metal ring loop, and a CR2032 battery. The battery is typically pre-installed in the remote.

تنظیم او برنامه کول

The KeylessOption EZSDEI474V remote requires programming to your vehicle's aftermarket alarm/remote start system. This process typically involves accessing a Valet/Programming switch within your vehicle.

د پروګرام کولو لارښوونې

1. Open a vehicle door and ensure the dome light is illuminated.
2. د موټرو سوځول دې ته واړوئ چلول position or start the engine.
3. Within 15 seconds, locate and press the Valet/Program push button:
   • Press and release 1 time for vehicles equipped with remote start.
   • Press and release 7 times for vehicles without remote start.
   After the initial presses, press the Valet/Program switch one more time and hold it down. You should receive a confirmation chirp from the vehicle (flashing parking lights, horn honk, or both).
4. While holding the Valet/Program switch, press the تالاشي button on the new transmitter. A chirp or horn-honk will confirm that the code has been successfully learned.
5. Once the code is learned, release the Valet/Program push button.
6. Turn the vehicle ignition off and test the remote's functionality.

شکل 3: Visual representation of the programming steps, emphasizing the Valet/Program switch interaction and the remote's Lock button press for code learning.

For additional programming resources, please visit the manufacturer's website or consult your aftermarket system's specific documentation.

شکل 4: This image highlights the DIY self-programming capability and lists compatible aftermarket alarm and remote start systems, including Viper, Python, Avital, Hornet, and Automate, along with various model numbers.

د ریموټ چلول

Once successfully programmed, your KeylessOption remote will control your vehicle's aftermarket alarm and remote start system. The buttons on the remote perform the following functions:

• د بندولو تڼۍ: Locks vehicle doors and arms the alarm system.
• د خلاصولو تڼۍ: Unlocks vehicle doors and disarms the alarm system.
• د AUX تtonۍ: Activates an auxiliary function, which may vary depending on your aftermarket system's configuration (e.g., trunk release, remote start activation).
• Panic Button (Yellow Asterisk): Activates the vehicle's panic alarm. Press and hold for a few seconds to activate, press again to deactivate.

Refer to your aftermarket system's manual for specific details on how each button interacts with your installed system.

ساتنه

د بیټرۍ بدلول

The remote uses a CR2032 lithium coin cell battery. If the remote's range decreases significantly or it stops responding, the battery may need replacement.

1. د ریموټ کنټرول دوه برخې په احتیاط سره جلا کړئasing using a small flat-head screwdriver or a coin in the designated notch.
2. Remove the old CR2032 battery, noting its orientation (+ side up).
3. یو نوی CR2032 بیټرۍ دننه کړئ چې مثبت (+) اړخ یې پورته وي.
4. Snap the two halves of the remote casinپه خوندي توګه بیرته سره یوځای کړئ.

زړې بیټرۍ د ځایی مقرراتو سره سم له منځه یوسئ.

د ستونزو حل کول

If you continue to experience issues after following these troubleshooting steps, please contact KeylessOption customer support or a qualified automotive technician.

مشخصات

• ماډل: د KPT6058 معرفي کول
• د FCC ID: EZSDEI474V
• مطابقت لرونکي سیسټمونه: Viper, DEI, Automate, Valet, Avital, Clifford, Python Aftermarket Alarm/Remote Start Systems (with matching FCC ID)
• د بیټرۍ ډول: CR2032 لیتیم کوین سیل
• ابعاد: نږدې 2 x 0.75 x 4 انچه
• وزن: نږدې 0.317 اونس

تضمین او ملاتړ

KeylessOption products are designed for reliability and performance. For specific warranty information, please refer to the product packaging or the official KeylessOption website. For technical support or further assistance, please visit the په ایمیزون کې د کیلي پرته اختیار پلورنځی یا مستقیم د دوی د پیرودونکو خدماتو سره اړیکه ونیسئ.

یادونه: This is a replacement part designed to match the original in form and function. Ensure compatibility before purchase.

د ویډیو سرچینې

لاندې ویډیو یو بشپړ معلومات وړاندې کويview of KeylessOption products and may offer additional context for your remote key fob.