1. پیژندنه او وروستهview
The Xiaomi Mi Air Purifier 2S AC-M4-AA is designed to improve indoor air quality by efficiently filtering out pollutants. This intelligent air purifier is suitable for rooms up to 37m² and features a Clean Air Delivery Rate (CADR) of 310m³ per hour. It offers smart connectivity for app control and integrates with voice assistants for convenient operation, providing real-time air quality monitoring via its OLED display.
2. د محصول ب Featuresې
- European Version for compliance with regional standards.
- Smart air purifier with Wi-Fi connectivity and mobile app control (Mi Home app).
- Effective for rooms up to 37m² (approximately 398 sq ft).
- High air purification capacity of 310m³/h CADR.
- Integrated OLED display for real-time air quality (PM2.5), temperature, humidity, and filter status.
- Equipped with a high-efficiency HEPA filter for comprehensive air purification.
- Low noise operation, especially in Night Mode (as low as 32 dB).
- Voice control compatibility with supported smart home platforms.
3. د بسته محتويات
ډاډ ترلاسه کړئ چې ټول توکي په کڅوړه کې شتون لري:
- Xiaomi Mi Air Purifier 2S (AC-M4-AA)
- د بریښنا کیبل
- د کارن لارښود
- HEPA Filter (pre-installed or separately packaged)
4. د خوندیتوب لارښوونې
د خوندي عملیاتو ډاډ ترلاسه کولو او د زیان مخنیوي لپاره، مهرباني وکړئ دا خوندیتوب لارښوونې ولولئ او تعقیب یې کړئ:
- Always unplug the air purifier before cleaning, maintenance, or moving it.
- Do not block the air inlet or outlet vents. Maintain at least 20 cm (8 inches) clearance from walls and other objects.
- Use only the power adapter provided with the device. Ensure the voltage ستاسو د محلي بریښنا رسولو سره سمون لري.
- Do not operate the air purifier in wet or humid environments, such as bathrooms. Keep it away from water and other liquids.
- دا وسیله د افرادو (د ماشومانو په شمول) د فزیکي ، حسي یا ذهني وړتیاو کمښت ، یا د تجربې او پوهې نشتوالي سره د کارولو لپاره ندي ، پرته لدې چې دوی ته د دوی د خوندیتوب مسؤلیت لرونکي شخص لخوا د وسیلې کارولو په اړه نظارت یا لارښوونې ورکړل شوي وي.
- د هوا دننه یا بهر ته ګوتې یا بهرني شیان مه داخل کړئ.
- Do not use the air purifier near heat sources, flammable gases, or volatile substances.
- که د بریښنا تار خراب شوی وي، دا باید د تولید کونکي، د خدماتو اجنټ، یا ورته وړ اشخاصو لخوا بدل شي ترڅو د خطر څخه مخنیوی وشي.
5. ترتیب کول
Follow these steps to set up your Xiaomi Mi Air Purifier 2S:
- وسیله خلاص کړئ: Carefully remove the air purifier from its packaging. Remove any protective films or tapes.
- Install/Check Filter: Open the filter compartment cover, usually located at the back or bottom of the unit. Ensure the HEPA filter is correctly seated and any plastic packaging around the filter is removed. Close the cover securely.
- د پاکونکي ځای په ځای کړئ: Place the air purifier on a flat, stable surface. Ensure there is at least 20 cm (8 inches) of clear space around all sides and above the unit for optimal air circulation.
- بریښنا وصل کړئ: Plug the power cable into the power port on the back of the purifier, then plug the other end into a suitable electrical outlet.
- د Mi Home اپلیکیشن ډاونلوډ کړئ: Scan the QR code in the manual or search for "Mi Home" in your smartphone's app store (Google Play Store or Apple App Store). Download and install the app.
- اپلیکیشن سره وصل کړئ: Open the Mi Home app, create an account or log in. Follow the in-app instructions to add your Xiaomi Mi Air Purifier 2S. This typically involves selecting the device, connecting to its temporary Wi-Fi hotspot, and then connecting it to your home Wi-Fi network (2.4GHz only).
انځور: مخکینۍ برخه view of the Xiaomi Mi Air Purifier 2S, showing the main body and the circular OLED display.
انځور: پورته-ښکته view of the Xiaomi Mi Air Purifier 2S, highlighting the fan grille and control buttons on the top surface.
6. عملیاتي لارښوونې
Your air purifier can be operated via the physical buttons on the unit or through the Mi Home app.
6.1. Using Physical Buttons
- د بریښنا تڼۍ: Press the power button on the top of the unit to turn the air purifier on or off.
- د حالت تڼۍ: Press the mode button (often integrated with the power button or a separate button) to cycle through operating modes: Automatic, Night, and Manual.
6.2. Using the Mi Home App
The Mi Home app provides comprehensive control and monitoring features:
- ریموټ کنټرول: Turn the purifier on/off, change modes, and adjust fan speed from anywhere.
- ریښتیني وخت څارنه: View current PM2.5 levels, temperature, and humidity in your room.
- مهالویش: Set schedules for the purifier to turn on/off or change modes automatically.
- د فلټر حالت: Monitor the remaining lifespan of your filter and receive notifications when it's time for replacement.
- ترتیبات: Adjust display brightness, enable/disable sounds, and other device-specific settings.
6.3. عملیاتي طریقې
- اتوماتیک حالت: The purifier intelligently adjusts its fan speed based on the real-time air quality detected by its sensors.
- د شپې حالت: Operates at the lowest fan speed with minimal noise and a dimmed OLED display to ensure undisturbed sleep.
- لاسي حالت: Allows you to manually select a desired fan speed or purification intensity.
6.4. OLED Display Information
The circular OLED display provides key information at a glance:
- د PM2.5 غلظت: Shows the current particulate matter level in µg/m³.
- دحرارت درجه: د خونې د تودوخې درجه ښيي.
- رطوبت: Shows the relative humidity level.
- د وای فای حالت: Indicates connection status to your home network.
- عملیاتي حالت: Shows the currently active purification mode.
- د فلټر عمر: Displays the remaining percentage of the filter's life.
Image: The Xiaomi Mi Air Purifier 2S positioned in a modern living room, demonstrating its compact design and how it blends with home decor.
7. ساتنه
منظم ساتنه غوره فعالیت تضمینوي او ستاسو د هوا پاکونکي عمر اوږدوي.
7.1. د فلټر بدلول
The HEPA filter has a limited lifespan, typically 6-12 months, depending on usage and air quality. The Mi Home app and the OLED display will indicate when the filter needs replacement.
- Unplug the Purifier: Always disconnect the power before replacing the filter.
- Open Filter Compartment: Locate and open the filter compartment cover (usually at the back or bottom).
- زوړ فلټر لرې کړئ: Carefully pull out the used filter. Dispose of it according to local regulations.
- نوی فلټر داخل کړئ: Place a new, genuine Xiaomi HEPA filter into the compartment, ensuring it is correctly oriented and seated.
- پوښ بند کړئ: د فلټر کمپارټمنټ پوښ په خوندي ډول وتړئ.
- Reset Filter Lifespan: After replacement, open the Mi Home app and follow the prompts to reset the filter lifespan counter. This ensures accurate tracking of the new filter's usage.
انځور: شاته view of the Xiaomi Mi Air Purifier 2S, illustrating the location of the filter compartment cover for maintenance.
7.2. Cleaning the Purifier
- بهرنۍ پاکوالی: Wipe the exterior surfaces of the air purifier with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Air Inlet/Outlet Grilles: Use a soft brush or a vacuum cleaner with a brush attachment to gently clean dust and debris from the air inlet and outlet grilles.
- Laser Particle Sensor: Periodically clean the laser particle sensor, usually located on the back of the unit. Refer to the detailed manual or Mi Home app for specific instructions on how to access and clean this sensor, as it is crucial for accurate air quality readings.
8. ستونزه حل کول
که تاسو د خپل هوا پاکونکي سره ستونزې سره مخ شئ، لاندې عامې ستونزې او حل لارې وګورئ:
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| وسیله فعاله نه ده | Power cable not connected; Filter compartment not closed properly; Power outlet issue. | Ensure power cable is securely plugged in. Close the filter compartment cover completely. Test the power outlet with another device. |
| No Wi-Fi connection / App control not working | Incorrect Wi-Fi password; Router too far; 5GHz Wi-Fi network; App pairing issue. | Ensure your Wi-Fi network is 2.4GHz. Move the purifier closer to the router. Restart the purifier and your router. Follow the Mi Home app's re-pairing instructions. |
| د پاکولو ضعیف فعالیت | Filter lifespan expired; Air inlets/outlets blocked; Dirty laser particle sensor. | Check filter lifespan in the app and replace if necessary. Ensure no obstructions around the air inlets/outlets. Clean the laser particle sensor as per maintenance instructions. |
| د عملیاتو پرمهال غیر معمولي شور | Foreign object inside; Filter not seated correctly. | Unplug the device and check for any foreign objects. Ensure the filter is properly installed and secured. |
| OLED display not working or showing incorrect information | Temporary glitch; Sensor malfunction. | Try restarting the device by unplugging and plugging it back in. If the issue persists, contact customer support. |
9. مشخصات
Detailed technical specifications for the Xiaomi Mi Air Purifier 2S AC-M4-AA:
| مشخصات | ارزښت |
|---|---|
| د ماډل شمیره | AC-M4-AA |
| ابعاد (L x W x H) | 24 x 24 x 52 سانتي متره (9.4 x 9.4 x 20.5 انچه) |
| وزن | ۷.۰ کیلو ګرامه (۱۵.۵ پونډه) |
| د بریښنا سرچینه | برقی کیبل |
| درجه بندي ځواک | 29 واټ |
| د فلټر ډول | HEPA |
| د تطبیق وړ ساحه | تر ۷۹ متر مربع (۸۵۰ مربع فوټ) پورې |
| د شور کچه | 32 Decibels (in Night Mode) |
| د کنټرول ډول | Application and Physical Buttons |
| ځانګړي ځانګړتیاوې | Wi-Fi Connectivity, OLED Display |
Image: Diagram illustrating the dimensions (height, width, depth) of the Xiaomi Mi Air Purifier 2S.
10. تضمین او ملاتړ
For detailed warranty information, terms, and conditions, please refer to the warranty card included with your product or visit the official XIAOMI webسایټ. د هر ډول تضمین ادعا لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.
For technical support, service, or inquiries regarding your Xiaomi Mi Air Purifier 2S, please contact XIAOMI customer service or your local authorized retailer. Contact information can typically be found on the official XIAOMI webسایټ یا ستاسو د محصول اسنادو کې.
