1. پیژندنه
The AK Interactive AK1010 Fine Grey Primer is a high-quality aerosol primer designed for preparing various surfaces for painting. This 400ml can provides excellent adhesion and a smooth, matte grey finish, ideal for models, miniatures, and other craft projects. This manual provides essential information for safe and effective use of the product.
2. د خوندیتوب معلومات
خبرداری: This product is highly flammable and contains pressurized gas. Read all safety warnings before use.
- Use in a well-ventilated area. Avoid inhaling vapors.
- مناسب شخصي محافظتي تجهیزات واغوندئ، په شمول د دستکشو او سترګو محافظت.
- د تودوخې، ګرمو سطحو، چنګکونو، پرانیستې اورونو، او د اور وژنې نورو سرچینو څخه لرې وساتئ. سګرټ څکول منع دي.
- حتی د کارولو وروسته هم سوری یا سوځول مه کوئ.
- د لمر د رڼا څخه ساتنه وکړئ. د 50 ° C (122 ° F) څخه ډیر د تودوخې سره مخ مه کوئ.
- د ماشومانو د لاسرسي څخه لرې وساتئ.
- د سترګو سره د تماس په صورت کې، د څو دقیقو لپاره په احتیاط سره په اوبو سره مینځل. که چیرې لینزونه شتون ولري او اسانه وي نو لرې کړئ. مینځل دوام ورکړئ.
- د محلي مقرراتو سره سم د مینځپانګو / کانټینر ضایع کول.
3. ترتیب کول
- د کار ځای چمتو کړئ: Ensure the area is well-ventilated and free from dust. Cover surrounding areas with drop cloths or newspaper to protect them from overspray.
- سطحه چمتو کړئ: The surface to be primed must be clean, dry, and free of grease, oil, or loose particles. Lightly sand glossy surfaces for better adhesion.
- ډبه وخوځوئ: Shake the aerosol can vigorously for at least two minutes after the mixing ball begins to rattle. This ensures proper mixing of the primer components.
- ټیسټ سپری: Before applying to your main project, perform a test spray on an inconspicuous area or a scrap piece of material to check for color, flow, and compatibility.
4. عملیاتي لارښوونې
The AK1010 Fine Grey Primer comes with two nozzles for different spray patterns. Choose the appropriate nozzle for your application needs.
- د غوښتنلیک واټن: Hold the can approximately 20-30 cm (8-12 inches) from the surface.
- نري پوښونه تطبیق کړئ: Apply the primer in thin, even coats using a steady, sweeping motion. Avoid applying a thick single coat, as this can lead to drips, runs, and uneven drying.
- د پوښونو ترمنځ وچول: Allow approximately 1 hour of drying time between coats. This ensures proper adhesion and prevents lifting.
- څو کوټونه: Apply 2-3 thin coats for optimal coverage and a smooth finish.
- د درملنې بشپړ وخت: The primer will be fully cured and ready for subsequent painting after 24 hours.
5. ساتنه
Proper maintenance ensures the longevity of your product and consistent performance.
- د نوزل پاکول: After each use, invert the can and spray for a few seconds until only clear propellant comes out. This clears the nozzle and prevents clogging. Wipe any excess primer from the nozzle.
- ذخیره کول: Store the aerosol can in a cool, dry place, away from direct sunlight and temperatures exceeding 50°C (122°F). Ensure the cap is securely placed on the can.
6. ستونزه حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| Nozzle clogging | Primer dried in nozzle; insufficient cleaning after use. | Remove nozzle and soak in paint thinner. Clear with a thin wire. Replace if necessary. Always clean nozzle after use by inverting can and spraying. |
| نا مساوي سپرې نمونه | Insufficient shaking; nozzle partially clogged; can held too close or too far. | Shake can vigorously for 2 minutes. Clean or replace nozzle. Maintain consistent spray distance (20-30 cm). |
| Poor Adhesion / Peeling | Surface not properly cleaned or prepared; incompatible surface. | Ensure surface is clean, dry, and free of contaminants. Lightly sand glossy surfaces. Test on an inconspicuous area first. |
| Drips or Runs | Applying too much primer in one coat; can held too close. | Apply primer in thin, even coats. Maintain proper spray distance. Allow adequate drying time between coats. |
7. مشخصات
- نښه: اې کې انټرایکټیو
- د موډل نوم: AK1010
- رنګ: خړ
- د پای ډول: مټ
- د توکي حجم: 400 ملی لیتر
- ځانګړې ځانګړنه: پریمر
- د رنګ ډول: سپری
- Product Specific Uses: جنرال
- د سطحې سپارښتنه: Multiple surfaces
- د کور دننه او بهر کارول: بهر
- د توکو فورمه: ایروسول
- شاملې برخې: Paint, spray nozzle
- د کانټینر ډول: Aerosol can
- د درملنې بشپړ وخت: 24 ساعته
- پوښښ: 4-4.8 square meters per 400 ml
- Drying Time (Touch): 1 ساعت
- د اصلي هیواد: هسپانیه
- د اوبو مقاومت کچه: د اوبو مقاومت نلري
8. تضمین او ملاتړ
For specific warranty information or technical support regarding your AK Interactive AK1010 Fine Grey Primer, please refer to the official AK Interactive webسایټ ته مراجعه وکړئ یا مستقیم د دوی د پیرودونکو خدماتو سره اړیکه ونیسئ. د پیرود ثبوت په توګه د پیرود رسید وساتئ.