APOLLO 69ELF114TWG

Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator with Gauge Instruction Manual

Model: 69ELF114TWG

1. محصول ختم شوview

The Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator with Gauge (Model 69ELF114TWG) is designed to reduce incoming water pressure to a safe and consistent level for residential and commercial plumbing systems. This unit features a compact design, lead-free bronze construction, and an integrated internal bypass mechanism. It includes a color-coded gauge for easy pressure monitoring and adjustment.

Apollo 3/4 inch Bronze Water Pressure Regulator with Gauge

Figure 1: Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator with Gauge. This image shows the regulator with its integrated pressure gauge and yellow adjustment handle.

2. د خوندیتوب معلومات

  • د هر ډول نصب یا ساتنې پیل کولو دمخه تل د اوبو اصلي رسولو بند کړئ.
  • مناسب شخصي محافظتي تجهیزات (PPE) واغوندئ، لکه د خوندیتوب عینکې او دستکشې.
  • ډاډ ترلاسه کړئ چې ټولې اړیکې په سمه توګه مهر شوي دي ترڅو د لیکیدو مخه ونیول شي.
  • Consult local plumbing codes and regulations for proper installation procedures.
  • که تاسو د نصب کولو د کومې برخې په اړه ډاډه نه یاست، نو د وړ نل لیکونکي سره مشوره وکړئ.

3. د بسته محتويات

د نصبولو پیل کولو دمخه ډاډ ترلاسه کړئ چې ټولې برخې شتون لري:

  • 1x Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator
  • 1x Integrated Pressure Gauge

4. نصب کول

This regulator features a double union PEX-A (cold expansion) barb design for simplified installation in PEX-A piping systems. Ensure the regulator is installed in the correct flow direction, indicated by an arrow on the body.

  1. د نصب کولو سایټ چمتو کړئ: Turn off the main water supply. Drain the water lines to relieve pressure. Select a suitable location for the regulator, typically after the main shut-off valve and before any branch lines.
  2. Cut and Prepare PEX-A Piping: Cut the PEX-A pipe to the required length, ensuring clean, square cuts. Prepare the pipe ends for cold expansion connections according to PEX-A system manufacturer guidelines.
  3. تنظیم کوونکی وصل کړئ:
    • Apply appropriate thread sealant (e.g., Teflon tape or pipe dope) to the male threads of the PEX-A fittings.
    • Thread the PEX-A fittings onto the double union ends of the regulator. Ensure the flow arrow on the regulator body points in the direction of water flow into the building.
    • Tighten the union nuts securely, but do not overtighten.
    • Perform cold expansion connections on the PEX-A pipe ends to the fittings according to PEX-A system manufacturer instructions.
  4. د فشار ګیج نصب کړئ: The pressure gauge is typically pre-installed. Ensure it is securely threaded into the designated port on the regulator body.
  5. د اوبو رسولو بیا رغونه او د لیکو لپاره وګورئ: Slowly turn on the main water supply. Carefully inspect all connections for any signs of leaks. Tighten connections as necessary.
Apollo Water Pressure Regulator with PEX-A connections

شکل 2: اړخ view of the Apollo Water Pressure Regulator, showing the double union PEX-A connections and the flow direction arrow. Note the "MAX INLET 400 PSI" marking.

5. عملیاتي لارښوونې

The regulator is factory-set at 50 psi and is adjustable from 15 psi to 75 psi. No special tools are required for adjustment.

  1. اوسنی فشار وګورئ: Observe the reading on the integrated pressure gauge. The gauge is color-coded to indicate pressure ranges (e.g., Low, Optimal, Excessive).
  2. د فشار تنظیمول:
    • ته زیاتوالی pressure: Turn the yellow adjustment handle د ساعت په لور.
    • ته کمول pressure: Turn the yellow adjustment handle د ساعت په مقابل کې.
    • Make small adjustments and allow the system pressure to stabilize before re-checking the gauge.
  3. ترتیب تایید کړئ: Once the desired pressure is achieved (typically between 50-60 psi for most residential applications), confirm the reading on the gauge.
Apollo Water Pressure Regulator with gauge showing optimal pressure range

3 شکل: تړل view of the Apollo Water Pressure Regulator, highlighting the pressure gauge with its color-coded optimal range and the yellow adjustment handle.

6. ساتنه

The Apollo Water Pressure Regulator is designed for minimal maintenance. Regular checks can help ensure optimal performance.

  • Periodic Pressure Check: Periodically check the pressure gauge to ensure the system pressure remains at the desired setting. Fluctuations may indicate a need for adjustment or inspection.
  • د لیک تفتیش: Annually inspect the regulator and connections for any signs of leaks or corrosion.
  • پاکول: Clean the exterior of the regulator with a damp cloth as needed. Do not use harsh chemicals.
  • Sediment Filter (Optional): If your water supply contains significant sediment, consider installing a sediment filter upstream of the pressure regulator to prevent internal clogging.

7. ستونزه حل کول

ستونزهاحتمالي لاملد حل لاره
No water flow or very low pressure downstreamRegulator set too low; Main water supply off; Regulator clogged.Increase pressure setting; Check main water valve; Inspect for debris (consult a plumber if necessary).
Pressure too high downstreamRegulator set too high; Regulator malfunction.Decrease pressure setting; If problem persists, regulator may need replacement.
Water hammer or fluctuating pressureRapid changes in water demand; Regulator bypass mechanism issue.Ensure proper air chambers are installed in the plumbing system; Consult a plumber for regulator inspection.
په اړیکو کې لیکونهImproperly tightened connections; Insufficient thread sealant.Tighten connections; Reapply thread sealant if necessary (ensure water supply is off first).

8. مشخصات

  • ماډل: 69ELF114TWG
  • مواد: د برونزو
  • د ننوتلو پیوستون اندازه: 3/4 انچه
  • د انلیټ پیوستون ډول: Cross Linked Polyethylene (PEX-A)
  • د آوټ لیټ اتصال ډول: PEX
  • اعظمي عملیاتي فشار: 400 PSI (Inlet)
  • د تنظیم وړ فشار حد: 15 - 75 PSI (Factory-set at 50 PSI)
  • د توکي ابعاد (L x W x H): 2.13 x 7 x 8 انچه
  • د توکي وزن: ۲.۴۵ پونډه
  • تصدیقونه: Certified to ASSE 1003 and CSA B356, listed by ASSE and IAPMO (cUPC)
  • ځانګړي ځانګړتیاوې: Integrated internal bypass mechanism, Color-coded gauge

9. تضمین او ملاتړ

This Apollo Water Pressure Regulator comes with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact Apollo customer support.

For technical support or inquiries, please visit the official Apollo webسایټ یا د دوی د پیرودونکي خدماتو څانګې سره اړیکه ونیسئ.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.