د MXR M303 کلون لوپر پیډل کارونکي لارښود

1. پیژندنه

The MXR M303 Clone Looper Pedal is a compact effects unit designed for recording and layering audio loops. It offers up to 6 minutes of recording time with unlimited overdubs, and features such as double-speed, half-speed, and reverse playback. The pedal is equipped with an analog through-path and selectable buffered or true bypass switching to maintain signal integrity. Loops are stored even when the pedal is powered off.

Image 1.1: The MXR M303 Clone Looper Pedal, shown with three MXR patch cables and a 9V power adapter.

2. د بسته محتويات

• MXR M303 کلون لوپر پیډل
• Dunlop ECB003 9V Power Adapter
• 3 MXR Premium Patch Cables (6-inch)

3. کنټرولونه او اتصالات

۴.۳ د پورتنۍ پینل کنټرولونه

انځور ۴.۱: پورته view of the MXR M303 Clone Looper Pedal, highlighting the footswitches, knob, and indicator LEDs.

• REC/DUB Footswitch & LED (Red): Initiates recording, overdubbing, and undo/redo functions. The red LED indicates recording or overdubbing status.
• PLAY/STOP Footswitch & LED (Green): Controls loop playback and stopping. The green LED indicates playback status.
• د حجم نوب: Adjusts the output level of the loop.
• SPEED LED (Blue): Indicates when the loop is playing at half-speed or double-speed.
• REVERSE LED (Yellow): Indicates when the loop is playing in reverse.

3.2 د شا پینل پیوستون

انځور 3.2: شاته view of the MXR M303 Clone Looper Pedal, showing the IN, OUT, CTR, EXP, and +9VDC jacks.

• په جیک کې: 1/4-inch input for your instrument or other effects pedals.
• بهر جیک: 1/4-inch output to your ampلایفیر یا بل اغیزې پیډل.
• CTR Jack: 1/4-inch input for an external MXR Tap Tempo Switch to control speed, reverse, and other functions.
• د ایکسپ جیک: 1/4-inch input for an external expression pedal (e.g., DVP volume pedal) to control loop output level, or an MXR Tap Tempo Switch for 'Play Loop Once' mode.
• +9VDC Jack: Power input for the included Dunlop ECB003 9V adapter.

4. ترتیب کول

4.1 د بریښنا نښلول

1. Connect the Dunlop ECB003 9V power adapter to the +9VDC jack on the rear of the pedal.
2. د بریښنا اډاپټر په مناسب AC آوټ لیټ کې ولګوه.

Image 4.1: The Dunlop ECB003 9V power adapter, included with the pedal.

4.2 آډیو ارتباطات

1. Connect your instrument (e.g., guitar) or the output of another effects pedal to the IN jack using a 1/4-inch instrument cable.
2. سره وصل کړئ بهر جیک ستاسو amplifier or the input of the next effects pedal in your signal chain using a 1/4-inch instrument cable.

Image 4.2: An MXR premium patch cable, three of which are included for connecting pedals.

5. عملیاتي لارښوونې

۵.۱ د لوپ کولو اساسي دندې

1. Recording a Loop: فشار ورکړئ REC/ډب footswitch once. The red LED will illuminate, and recording will begin immediately. A flashing 4-count LED will precede the loop start to aid timing.
2. Ending the First Loop/Starting Playback: فشار ورکړئ REC/ډب footswitch again to end the initial recording and immediately begin playback. The red LED will turn off, and the green LED will illuminate.
3. ډیر ډوب کول: While a loop is playing (green LED on), press the REC/ډب footswitch once. The red LED will illuminate, indicating overdub mode. Play your additional layer. Press REC/ډب again to stop overdubbing and return to playback.
4. د پلې بیک بندول: While a loop is playing (green LED on), press the پلی/درول footswitch once. The green LED will turn off, and the loop will stop.
5. Resuming Playback: While the loop is stopped, press the پلی/درول footswitch once. The green LED will illuminate, and the loop will resume playback from the beginning.
6. Undoing the Last Overdub: While a loop is playing or stopped, press and hold the REC/ډب footswitch for approximately 2 seconds. The last overdubbed layer will be removed.
7. Redoing the Last Overdub: After undoing an overdub, press and hold the REC/ډب footswitch for approximately 2 seconds again to restore the undone layer.
8. Clearing All Loops: While a loop is playing or stopped, press and hold the پلی/درول footswitch for approximately 2 seconds. All recorded loops will be erased.

5.2 Loop Volume Adjustment

د حجم knob controls the output level of the recorded loop. Rotate clockwise to increase volume and counter-clockwise to decrease it. This allows you to balance the loop's volume with your live instrument signal.

6. پرمختللې دندې

6.1 Speed Control (Half-Speed / Double-Speed)

While a loop is playing, quickly double-tap the REC/ډب footswitch. Each double-tap will cycle through normal speed, half-speed (blue SPEED LED on), and double-speed (blue SPEED LED flashing). Half-speed doubles the loop length to 12 minutes, while double-speed halves it to 3 minutes.

۵.۳ د معکوس فعالیت

While a loop is playing, quickly double-tap the پلی/درول footswitch. The loop will play in reverse, and the yellow REVERSE LED will illuminate. Double-tap again to return to forward playback.

6.3 External Control (CTR Jack)

Connect an MXR Tap Tempo Switch (sold separately) to the CTR jack for external control over various functions. Consult the Tap Tempo Switch manual for specific operations.

6.4 External Control (EXP Jack)

• د بیان پیډل: Connect a DVP volume pedal (sold separately) to the EXP jack to control the loop's output level externally.
• Play Loop Once Mode: Connect an MXR Tap Tempo Switch to the EXP jack. In this configuration, pressing the Tap Tempo Switch will play the loop once and then stop, allowing for stutter effects or precise loop triggering.

7. ساتنه

To ensure optimal performance and longevity of your MXR M303 Clone Looper Pedal:

• پیډل پاک او له دوړو او کثافاتو څخه پاک وساتئ. د پاکولو لپاره نرم، وچ ټوکر وکاروئ.
• د پیډل د سختې تودوخې، رطوبت، یا مستقیم لمر وړانګو سره د مخ کیدو څخه ډډه وکړئ.
• Always use the specified 9V DC power adapter (Dunlop ECB003) to prevent damage.
• Disconnect power when the pedal is not in use for extended periods.

8. ستونزه حل کول

• غږ نشته:
  • Ensure all cables are securely connected to the correct IN and OUT jacks.
  • Verify the power adapter is properly connected and functioning.
  • Check the VOLUME knob position; ensure it is not set to minimum.
  • Test with different cables and a different power source if possible.
• Loop Not Recording/Overdubbing:
  • Ensure the pedal is powered on.
  • Confirm the REC/DUB footswitch is being pressed correctly according to the operating instructions.
• ناڅاپي چلند:
  • Disconnect and reconnect power to reset the pedal.
  • Ensure no external controllers are inadvertently connected or sending conflicting signals to the CTR or EXP jacks.

9. مشخصات

10. تضمین او ملاتړ

For warranty information and technical support, please refer to the official MXR website or contact your authorized MXR dealer. Keep your proof of purchase for warranty claims.