iJDMTOY F30 Style Carbon Fiber LED Illuminated Shift Knob Installation Manual

1. پیژندنه

This manual provides detailed instructions for the installation and operation of your new iJDMTOY F30 Style Carbon Fiber Finish LED Illuminated Shift Knob Gear Selector. This product is designed to upgrade your vehicle's interior with a modern, illuminated shift knob.

مطابقت:

• 2006-2012 BMW E90 E91 3 Series Sedan/Wagon
• 2007-2010 BMW E92 E93 3 Series Coupe/Convertible (Pre-LCI)
• 2010-2012 BMW E84 X1 (Pre-LCI)
• 2004-2010 BMW E81 E87 1 Series
• 2009-2012 BMW E89 Z4 (Pre-LCI)

Note: Designed for left-hand drive automatic transmission ONLY.

2. د بسته محتويات

ستاسو په بسته کې باید لاندې توکي شامل وي:

• 1x iJDMTOY F30 Style Carbon Fiber Finish LED Illuminated Shift Knob
• 1x Pre-wired Adapter Harness

Please inspect all components for any damage or missing parts before proceeding with installation.

Figure 1: iJDMTOY F30 Style Carbon Fiber LED Illuminated Shift Knob and packaging.

۴. تنظیم (نصب)

Follow these steps carefully to install your new shift knob. It is recommended to watch the provided installation video for a visual guide.

3.1. تیاری

1. خپل موټر په سطحه پارک کړئ او د پارکینګ بریک مشغول کړئ.
2. Turn off the vehicle's ignition completely.
3. For safety, disconnect the negative terminal of your vehicle's battery. This prevents electrical shorts during the installation process.

3.2. Remove Original Shift Knob and Trim

4. Firmly pull upwards on the original shift knob to detach it from the shifter shaft. This may require significant force.
5. Carefully pry up the surrounding trim panel from the inside, starting from the edges, to expose the shifter mechanism and electrical connectors.
6. Disconnect all electrical connectors attached to the original shift knob assembly and trim.

Figure 2: New shift knob (left) compared to an older style (right).

Figure 3: Visual comparison of interior before and after installation.

3.3. Connect New Shift Knob Wiring

7. Connect the provided pre-wired adapter to the vehicle's panel gear indicator lights. This adapter is designed to integrate seamlessly without requiring complex wiring modifications.
8. Connect the new F30 style shift knob to the adapter harness.

3.4. Install New Shift Knob and Reassemble

9. Before fully reassembling, reconnect the vehicle battery and turn on the ignition to test all LED indicator lights on the new shift knob. Ensure they illuminate correctly for each gear position (P, R, N, D, M/S).
10. Once confirmed working, disconnect the battery again.
11. Carefully reinstall the leather boot and push the new shifter firmly into place until it clicks securely.
12. Reattach the trim panel, ensuring all clips are engaged.
13. د موټر د بیټرۍ منفي ترمینل بیا وصل کړئ.

For a detailed visual guide, please refer to the installation video below:

Figure 4: Installed shift knob with illuminated gear indicators.

شکل ۴: پراخه view of the installed shift knob in the vehicle interior.

4. عملیاتي لارښوونې

Your new iJDMTOY F30 Style LED Illuminated Shift Knob features intuitive operation and clear visual feedback:

• د LED شاخصونه: The shift knob features functional LED indicator lights. Green LEDs indicate the current gear position (Park, Drive, Neutral, Reverse, and M/S mode). The lettering on the knob is illuminated with an iconic orange light.
• Parking Button: A dedicated push button is located on the knob for engaging the Park (P) gear.
• Gear Change Button: A thumb button is used for changing between different gears.

Figure 6: Close-up of the illuminated gear indicators on the shift knob.

5. ساتنه

To ensure the longevity and appearance of your shift knob:

• Clean the shift knob regularly with a soft, damp ټوکر
• Avoid using abrasive cleaners or harsh chemicals, as these can damage the carbon fiber finish or the LED components.
• Ensure the leather boot is free from debris to prevent wear.

6. ستونزه حل کول

If you encounter any issues with your iJDMTOY F30 Style LED Illuminated Shift Knob, consider the following:

• هغه څراغونه چې روښانه نه کوي:
  • Check all electrical connections to ensure they are securely plugged in.
  • Verify that the vehicle battery is properly reconnected.
  • Ensure the ignition is on when testing the lights.
• خلاص فټ:
  • Ensure the shift knob was pushed firmly onto the shifter shaft until it clicked into place during installation.
  • Check that the trim panel is correctly seated and all clips are engaged.

If problems persist, please refer back to the installation video or contact iJDMTOY customer support.

7. مشخصات

• مواد: Plastic, Carbon Fiber (handle)
• د LED رنګونه: Orange (lettering), Green (gear indicators)
• والیtage: 12 ولټه
• واټtage: 3 واټ
• د بلب ډول: LED
• د توکي وزن: 10 اونس
• Handle Attachment Mechanism: Plug-in/Snap-on

8. تضمین او ملاتړ

For any warranty claims, technical assistance, or further inquiries, please contact iJDMTOY customer support directly. Refer to your purchase documentation for specific warranty terms and contact information.