JIAYIN JYPC-3 Series Electromagnetic Plunger Pump User Manual

1. پیژندنه

This manual provides essential information for the safe and effective use of your JIAYIN JYPC-3 Series Electromagnetic Plunger Pump. Please read these instructions thoroughly before installation, operation, or maintenance to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. محصول ختم شوview

The JIAYIN JYPC-3 is an original plunger-type electromagnetic pump designed for various applications, including hot water dispensers. It operates on AC 110V-120V power, delivering a flow rate of 700cc/min with a working pressure up to 2.5 bar. Its robust design ensures reliable performance with water or non-corrosive liquids.

کلیدي ځانګړتیاوې:

• Designed for AC 110V-120V, 60Hz power supply.
• 25W power consumption.
• Flow rate of 700 ±10% cc/min.
• Suitable for water or non-corrosive liquids.
• Operating ambient temperature: up to 70℃ (158°F).
• Operating medium temperature: up to 60℃ (140°F).
• Plunger type mechanism for efficient suction.

شکل 2.1: مخکی view of the JIAYIN JYPC-3 electromagnetic plunger pump, showing the main body, electrical terminals, and inlet/outlet ports.

شکل ۳: زاویه لرونکی view of the JIAYIN JYPC-3 pump, highlighting the plunger mechanism and compact design.

3. تخنیکي مشخصات

The following table details the technical specifications of the JIAYIN JYPC-3 electromagnetic plunger pump:

Figure 3.1: Detailed dimensional drawing of the JIAYIN JYPC-3 pump, showing key measurements in millimeters and inches.

Figure 3.2: Technical parameters and performance graphs for the JIAYIN JYPC-3 pump, illustrating flow/pressure, flow time, and temperature/time relationships.

4. د خوندیتوب معلومات

Adhering to safety precautions is crucial for preventing injury and damage to the pump. Please observe the following:

• بریښنایی خوندیتوب: ډاډ ترلاسه کړئ چې د بریښنا رسولو د پمپ حجم سره سمون لريtage (AC 110V-120V). Disconnect power before installation, maintenance, or troubleshooting. All electrical connections should be performed by a qualified individual and comply with local electrical codes.
• د مایع مطابقت: Use only water or non-corrosive liquids. Using corrosive chemicals can damage the pump and void the warranty.
• د تودوخې محدودیتونه: Do not exceed the specified ambient (70℃/158°F) or medium (60℃/140°F) temperature limits. Overheating can lead to pump failure.
• مناسب نصب کول: Install the pump in a horizontal position as specified. Incorrect orientation may affect performance and longevity.
• د وچ چلولو څخه ډډه وکړئ: Do not operate the pump without liquid. Dry running can cause severe damage to internal components.
• خوندي اړیکې: Ensure all tubing and electrical connections are secure to prevent leaks or electrical hazards.
• ماشومان او څاروي: Keep the pump and its associated components out of reach of children and pets.

5. ترتیب او نصب کول

Follow these steps for proper installation of your JYPC-3 pump:

1. بسته بندي کول: Carefully remove the pump from its packaging. Inspect for any visible damage.
2. پورته کول: Mount the pump securely in a horizontal position. Ensure there is adequate space for tubing connections and ventilation.
3. د نلونو نښلول:
   • Connect the inlet tubing to the designated inlet port. The product description specifies a flow test method using a 13.8-inch silicon tube with an outer diameter of 0.31 inches and an inner diameter of 0.16 inches. Ensure your tubing is compatible and securely fastened to prevent leaks.
   • Connect the outlet tubing to the designated outlet port.
   • ډاډ ترلاسه کړئ چې ټیوب نه دی کږ شوی یا بند شوی نه دی.
4. بریښنایی پیوستون:
   • ډاډ ترلاسه کړئ چې د بریښنا سرچینه د بریښنایی اتصال کولو دمخه منحل شوې ده.
   • Connect the pump's electrical terminals to an AC 110V-120V, 60Hz power supply. Refer to the wiring diagram of your specific application for correct polarity if applicable.
   • Verify all electrical connections are tight and insulated to prevent short circuits or electrical hazards.
5. پرائمینګ (که اړتیا وي): Depending on your application, the pump may require priming to ensure it is filled with liquid before initial operation. Consult your system's specific requirements.

شکل 5.1: View of the JIAYIN JYPC-3 pump showing the electrical terminals for power connection.

Figure 5.2: The JIAYIN JYPC-3 pump with protective red caps on the inlet and outlet ports, indicating proper handling before tubing installation.

6. عملیاتي لارښوونې

Once the pump is properly installed and all connections are secure, you can begin operation:

1. Verify Liquid Supply: Ensure there is an adequate supply of the intended liquid (water or non-corrosive) available at the pump's inlet. Never operate the pump dry.
2. پاور آن: Connect the pump to the AC 110V-120V, 60Hz power supply. The pump should begin to operate, drawing liquid through the inlet and expelling it through the outlet.
3. د څارنې فعالیت: Observe the pump during initial operation. Check for any unusual noises, vibrations, or leaks. Verify that liquid is flowing as expected.
4. د جریان کنټرول: The pump has a flow control range of ±10%. If your system requires precise flow, integrate appropriate external flow control mechanisms.
5. بندول: To stop the pump, disconnect it from the power supply.

7. ساتنه

Regular maintenance helps ensure the longevity and optimal performance of your JYPC-3 pump:

• منظم معاینه: Periodically inspect the pump and all connections for signs of wear, damage, or leaks.
• پاکوالی: Ensure the pump's exterior is kept clean. Prevent dust and debris from accumulating around the motor housing, which could impede cooling.
• د بندېدو مخنیوی: If the pump is used with liquids that may contain particulates, consider installing an inline filter on the inlet side to prevent clogging of the pump''s internal mechanisms.
• ذخیره کول: If the pump is to be stored for an extended period, drain any remaining liquid and store it in a dry, clean environment.
• د کارونکي د خدمت وړ برخې نشته: The internal components of the pump are not designed for user servicing. Do not attempt to disassemble the pump, as this may cause damage and void the warranty.

8. ستونزه حل کول

If you encounter issues with your JYPC-3 pump, refer to the following troubleshooting guide:

که چیرې د دې حل لارو هڅه کولو وروسته هم ستونزه دوام ومومي، مهرباني وکړئ د پیرودونکو ملاتړ سره اړیکه ونیسئ.

۷. تضمین او د پیرودونکو ملاتړ

For warranty information or technical assistance, please contact the retailer or manufacturer directly. Provide your product model (JYPC-3) and purchase date when seeking support. Do not attempt to repair the pump yourself, as this may void any applicable warranty.