Montech X2 MESH ATX Mid-Tower Case User Manual

1. محصول ختم شوview

The Montech X2 MESH is an ATX mid-tower computer case designed for PC enthusiasts and builders. It features a fine mesh front panel for optimal airflow, a full tempered glass side panel to showcase internal components, and comes with three pre-installed rainbow LED fans (two 140mm at the front and one 120mm at the rear) to ensure efficient cooling and aesthetic appeal.

This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Montech X2 MESH case.

شکل 1: Montech X2 MESH Mid-Tower Case with Tempered Glass Side Panel.

2. ترتیب او نصب کول

Follow these steps for installing your components into the Montech X2 MESH case. Ensure all power is disconnected before beginning installation.

2.1 د قضیې پرانیستل

1. Carefully remove the tempered glass side panel by unscrewing the thumb screws located at the rear of the case.
2. Gently slide the glass panel backward and lift it off. Place it on a soft, flat surface to prevent scratches or damage.
3. Remove the opposite steel side panel by unscrewing its thumb screws and sliding it backward.

2.2 د مادر بورډ نصب کول

The X2 MESH supports ATX, Micro-ATX, and Mini-ITX motherboards.

1. د I/O شیلډ (که ستاسو په مور بورډ کې مخکې له مخکې نصب شوی نه وي) د کیس په شا خلاصیدو کې نصب کړئ.
2. Align your motherboard with the standoffs inside the case. Ensure the standoffs match your motherboard's form factor.
3. د ورکړل شویو پیچونو په کارولو سره مور بورډ خوندي کړئ. ډیر مه ټینګوئ.

شکل 2: Internal layout indicating ATX, Micro-ATX, Mini-ITX motherboard compatibility and fan mounting points.

2.3 د بریښنا رسولو واحد (PSU) نصب کول

The case accommodates standard ATX power supply units, with a recommended maximum length of approximately 180mm.

1. Mount your PSU into the dedicated compartment at the bottom rear of the case.
2. Secure it with screws from the rear of the case.

۴.۴ د ذخیره کولو ډرایو نصب کول

The case provides mounting points for HDDs and SSDs.

1. Locate the drive bays/mounts behind the motherboard tray or in the PSU shroud area.
2. Install your 2.5" SSDs or 3.5" HDDs into the appropriate trays or mounting points and secure them.

شکل 3: شاته تخته view highlighting wiring space, HDD/SSD mounting locations, and PSU area.

2.5 د کیبل مدیریت

Utilize the wiring space behind the motherboard tray to route and organize cables. This improves airflow and aesthetics.

• Route power cables (24-pin ATX, 8-pin CPU, PCIe) and data cables (SATA) through the grommets and cutouts.
• Use cable ties or Velcro straps to bundle cables neatly.
• Connect front panel headers (USB, audio, power/reset switches, LED indicators) to your motherboard.

3. عملیات

کله چې ټولې برخې نصب شي او کیبلونه وصل شي، تاسو کولی شئ خپل سیسټم ته بریښنا ورکړئ.

3.1 فعالول

1. Ensure all external peripherals are connected.
2. Connect the power cable to your PSU and a wall outlet.
3. د PSU د بریښنا سویچ 'آن' حالت ته واړوئ.
4. Press the power button on the top panel of the Montech X2 MESH case.

3.2 Fan Operation and Lighting

The Montech X2 MESH comes with three pre-installed rainbow LED fans: two 140mm fans at the front and one 120mm fan at the rear. These fans provide high airflow for cooling your components.

• The fans feature fixed rainbow LED lighting. The fan color cannot be changed or customized.
• Ensure the fan power connectors are properly connected to your motherboard or PSU. Note that some older fan connectors might be Molex.

شکل 4: Pre-installed fixed rainbow LED fans (2x 140mm, 1x 120mm).

شکل 5: Fine mesh front panel designed for high airflow.

4. ساتنه

منظم ساتنه ستاسو د کمپیوټر اجزاو غوره فعالیت او اوږد عمر ډاډمن کولو کې مرسته کوي.

۶.۱ د دوړو پاکول

• د مخکینۍ میش پینل: Periodically clean the fine mesh front panel to prevent dust buildup, which can restrict airflow. Use a soft brush or compressed air.
• داخلي: With the system powered off and unplugged, open the side panels and use compressed air to remove dust from fans, heatsinks, and other components.

4.2 Tempered Glass Care

• Clean the tempered glass side panel with a microfiber cloth and a non-abrasive glass cleaner.
• Avoid harsh chemicals or abrasive materials that could scratch the glass.
• Handle the glass panel carefully to prevent accidental drops or impacts.

5. ستونزه حل کول

دا برخه هغه عامې ستونزې په ګوته کوي چې تاسو ورسره مخ کیدی شئ.

۶.۲ سیسټم نه فعالېږي

• Check if the PSU switch is in the 'ON' position.
• Ensure all power cables (24-pin ATX, 8-pin CPU, PCIe) are securely connected to the motherboard and components.
• Verify that the front panel power switch cable is correctly connected to the motherboard's front panel header.

5.2 Fans Not Spinning or Lighting Up

• Confirm that the fan power connectors are properly seated on the motherboard or PSU.
• If using Molex connectors, ensure they are fully connected.
• The pre-installed fans have fixed rainbow LED lighting and do not offer customization.

5.3 Difficulty with Motherboard Installation

• Ensure you are using the correct standoffs for your motherboard's form factor (ATX, Micro-ATX, Mini-ITX).
• For full ATX motherboards, cable routing might be tighter. Ensure cables are routed efficiently through the designated wiring space.
• Avoid overtightening screws, as this can strip them or damage the motherboard.

6. مشخصات

7. تضمین او ملاتړ

For warranty information and technical support, please refer to the official Montech webسایټ یا خپل محلي پرچون پلورونکي سره اړیکه ونیسئ. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.

Importer Contact (India): Tirupati Enterprises, 11 Robert Street, 1st Floor, Kolkata - 700012. Phone - 033-40037713.