محصول پای ته ورسیدview
The TEKTON Solid Punch Set (PNC94001) is designed for loosening stubborn fasteners such as pins, plugs, rivets, or damaged bolts that are stuck in a workpiece. This set includes 9 solid punches ranging in size from 1/16 inch to 3/8 inch.
Each punch is precisely machined and individually heat-treated to ensure durability and performance. The tip is hardened and strengthened, while the striking end maintains a softer temper to absorb hammer blows without chipping. Made from 5160 high carbon steel, these punches feature a dry, rust-preventative coating and high-visibility laser markings for easy identification.
Image: The complete TEKTON Solid Punch Set, 9-Piece, showcasing the range of sizes.
د خوندیتوب معلومات
- Always wear appropriate eye protection (safety glasses or goggles) when using punches.
- Ensure the workpiece is stable and secured before striking.
- Use a hammer of appropriate weight and material for striking the punch. Avoid using hardened hammers on the striking end.
- Inspect punches for any signs of damage, such as mushroomed heads or chipped tips, before use. Do not use damaged tools.
- Keep hands clear of the striking area.
تنظیم او چمتو کول
- Select the Correct Punch Size: Choose a punch with a tip diameter slightly smaller than the pin, rivet, or bolt you intend to remove. This ensures the punch engages the fastener effectively without damaging the surrounding material.
- د کار ټوټه خوندي کړئ: Place the item containing the fastener on a stable, solid surface, such as an anvil or sturdy workbench. Ensure it is clamped or held securely to prevent movement during striking.
- Position the Punch: Place the tip of the selected solid punch directly onto the center of the fastener to be removed.
Image: Illustration of a solid punch, highlighting its blunt end and tapered shaft design, optimized for loosening stubborn fasteners.
عملیاتي لارښوونې
Follow these steps for effective and safe use of your TEKTON Solid Punches:
- لومړنی اعتصاب: With the punch tip centered on the fastener, hold the punch firmly and strike the striking end with a hammer. Use moderate force initially to ensure the punch is properly seated and begins to move the fastener.
- Progressive Striking: Continue striking the punch with controlled, firm blows. The punch's design allows it to absorb hammer blows without chipping, transferring force efficiently to the fastener.
- د پرمختګ څارنه: Observe the fastener's movement. If it resists, ensure the punch is still aligned and the workpiece is secure. Avoid excessive force that could damage the punch or workpiece.
- بشپړ لرې کول: Continue striking until the fastener is sufficiently loosened or driven out of the workpiece.
Image: A TEKTON solid punch being struck by a hammer, demonstrating the proper technique for driving out fasteners. The striking end is designed to absorb impact.
Image: Diagram illustrating the individual heat treatment process, showing the hardened tip and the softer, impact-absorbing striking end of the punch.
ساتنه او پالنه
- پاکول: After each use, wipe the punches clean to remove any dirt, grease, or debris.
- د ځنګل مخنیوی: The punches are finished with a dry, rust-preventative coating. For prolonged storage or use in humid environments, consider applying a light coat of rust-inhibiting oil.
- ذخیره کول: Store the punches in a dry place, preferably in a tool roll or box to protect them from damage and corrosion.
- معاینه: Regularly inspect the punches for wear. If the striking end shows significant mushrooming or the tip becomes dull or chipped, the punch may need to be replaced or reconditioned by a professional.
انځور: نږدې انځور view of the punch's surface, highlighting the durable 5160 high carbon steel construction and the rust-preventative coating.
د ستونزو حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| Punch not moving fastener | Incorrect punch size, insufficient force, or fastener is severely seized. | Ensure punch tip is slightly smaller than fastener. Increase striking force gradually. Apply penetrating oil to seized fasteners and allow time to work. |
| Punch tip deforming or chipping | Punch being used on material harder than intended, or improper striking angle. | Verify the punch is suitable for the material. Ensure strikes are direct and centered. Replace damaged punches. |
| Mushrooming of striking end | Repeated heavy striking, or using a hammer that is too hard or heavy. | While the striking end is designed to absorb blows, excessive force over time can cause mushrooming. Use an appropriate hammer. File off mushroomed edges to prevent chipping. |
مشخصات
| فیچر | تفصیل |
|---|---|
| د ماډل شمیره | PNC94001 |
| په سیټ کې شامل دي | 9-piece solid punches: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 in. |
| مواد | 5160 High Carbon Steel |
| ختم | Dry, rust-preventative coating |
| نښه کول | High-visibility laser marking for size |
| د توکي وزن | ۲.۴۵ پونډه |
| د محصول ابعاد | 8.5 x 3.7 x 0.5 انچه |
| د تولید ځای | په متحده ایالاتو کې جوړ شوی |
Image: A close-up of a TEKTON punch, clearly showing the laser-etched size marking (e.g., 3/16 inch) for easy identification.
تضمین او ملاتړ
TEKTON stands behind its products with a comprehensive warranty policy.
- د تضمین توضیحات: No time limits, no receipts. For full details, visit the official TEKTON warranty page.
- Warranty Information Link: tekton.com/warranty
- د پیرودونکي ملاتړ: For additional product information, support, or to explore other TEKTON tools, please visit the TEKTON Store.
- TEKTON Store Link: TEKTON Store on Amazon