BESTTEN Almond Dimmer Light Switch User Manual
Model: LUXDMWK600-12-3
For Dimmable LED, Halogen, and Incandescent Bulbs
1. محصول ختم شوview
The BESTTEN Almond Dimmer Light Switch is designed to provide adjustable lighting levels for various bulb types. It supports both single-pole and 3-way applications and includes a decorator wall plate. This dimmer features a memory function to recall the last dimmed setting and an adjustable dimming range to prevent flickering.
Figure 1: BESTTEN Almond Dimmer Light Switch with included wall plate.
2. د بسته محتويات
- ډیمر سویچونه
- پیچ
- والپیپرټونه
3. د خوندیتوب معلومات
- خبرداری: د اور، شاک یا مرګ څخه د مخنیوي لپاره، د سرکټ بریکر یا فیوز بکس کې بریښنا بنده کړئ او د تار لګولو دمخه ازموینه وکړئ چې بریښنا بنده ده.
- د ټولو ملي او محلي بریښنا کوډونو سره سم نصب کړئ.
- Use only with compatible dimmable bulbs (LED, CFL, Incandescent, Halogen).
- Do not use with non-dimmable bulbs or motor-driven appliances like fans.
- Only one dimmer switch can be installed in a 3-way circuit.
4. د نصبولو لارښوونې
4.1 Wiring for Single-Pole Application
A single-pole application controls a light fixture from one location. Ensure power is off before proceeding.
Figure 2: Single-pole wiring diagram. Connect the hot wire to the silver screw, the load wire to the brass screw, and the ground wire to the green screw. No neutral wire is required.
4.2 Wiring for 3-Way Application
A 3-way application controls a light fixture from two locations. Only one dimmer switch can be installed in a 3-way circuit. Ensure power is off before proceeding.
Figure 3: 3-way wiring diagram. Connect the hot wire to the silver screw, the load wire to one brass screw, and the traveler wire to the other brass screw. Connect the ground wire to the green screw. No neutral wire is required.
4.3 Dimming Range Adjustment
This dimmer features an adjustable dimming range to optimize performance and eliminate flickering with various dimmable LED/CFL bulbs. Follow these steps to adjust the dimming range:
- سویچ چالان کړئ او د سلایډ ډیمر ټیټ (کی left لاس) ترتیب ته واچوئ.
- Rotate (counter-clockwise) the sensitivity dial (located on the side of the switch) all the way up. یادونه: If the dial stops in either direction, do not force it.
- Rotate (clockwise) the sensitivity dial down slowly until the preferred lowest light level is achieved and the lights are not flickering.
Figure 4: Location of the sensitivity dial for dimming range adjustment.
Video 1: Demonstration of the dimming range setting process to eliminate flickering.
5. عملیات
- آن/بند: Press the top or bottom of the rocker switch to turn the lights on or off.
- دیمینګ: Use the horizontal slider to adjust the light intensity. Move the slider up for brighter light and down for dimmer light.
- د حافظې دنده: The switch remembers the last dimmed light setting and will turn on to that exact light level when activated.
6. مطابقت
This dimmer switch is universally compatible with most dimmable LED, CFL, incandescent, and halogen bulbs.
- د کمولو وړ LED/CFL: Up to 150 Watts (minimum load: 3W)
- تاپدید/هالوجن: تر 600 واټو پورې
Figure 5: Bulb compatibility and wattage درجه بندي.
7. د محصول اندازه
Figure 6: Product dimensions. The switch measures approximately 4.13 x 2.12 x 1.35 inches. Ensure your electrical box has a depth of at least 2 inches for proper fit.
8. مشخصات
| فیچر | مشخصات |
|---|---|
| د عملیاتو حالت | آن - بند |
| اوسنۍ درجه بندي | 15 Amps |
| د عملیاتو Voltage | 120 ولټه |
| د اړیکو ډول | تارونه |
| د نښلونکي ډول | Crimp |
| برانډ | غوره |
| د سویچ ډول | ډیمر |
| ترمینل | سکرو |
| مواد | Polycarbonate, Brass (Contact Material) |
| د توکي ابعاد (L x W x H) | 4.13 x 2.12 x 1.35 انچه |
| د سرکټ ډول | 3-way (also supports Single-Pole) |
| د نصب کولو ډول | دیوال غر |
| د فعالیت ډول | راکر |
| د لوړ حرارت درجه درجه | 40 درجې سیلسیس |
| واټtage (کم کیدونکی LED/CFL) | Max. 150W (Min. Load: 3W) |
| واټtage (تمبکی) | اعظمي 600W |
| رنګ | بادام |
| د نړیوال خوندیتوب درجه بندي | IP20 |
| د مشخصاتو ملاقات | UL |
| د ماډل شمیره | LUXDMWK600-12-3 |
9. ستونزه حل کول
- ځلانده څراغونه: If your lights are flickering, rotate the side adjustment wheel (sensitivity dial) as described in Section 4.3 to fine-tune the dimming range. Dimmable LEDs may not dim the same as incandescent or halogen bulbs, and their dimming range can vary by manufacturer.
- Lights Not Turning On/Off Consistently (3-Way): In 3-way applications, ensure the line and load wires are correctly identified and connected. Incorrect wiring can cause inconsistent operation or flickering. Only one dimmer switch should be installed in a 3-way circuit.
- Switch Does Not Fit in Electrical Box: The dimmer switch has dimensions of 4.13 x 2.12 x 1.35 inches. Ensure your electrical box has a depth of at least 2 inches to accommodate the switch.
10. ساتنه
To clean the dimmer switch and wall plate, wipe with a soft, damp ټوکر. د کثافاتو پاکوونکي یا محلولونه مه کاروئ. ډاډ ترلاسه کړئ چې د پاکولو دمخه بریښنا بنده ده.
11. تضمین او ملاتړ
د تضمین معلوماتو یا تخنیکي ملاتړ لپاره، مهرباني وکړئ د تولید کونکي چارواکي ته مراجعه وکړئ website or contact their customer service. Keep your purchase receipt for proof of purchase.