SMARTRO SENSOR92

SMARTRO Wireless Remote Sensor User Manual

Model: SENSOR92

پیژندنه

This manual provides detailed instructions for the setup, operation, and maintenance of your SMARTRO Wireless Remote Sensor (Model SENSOR92). This sensor is designed to work with compatible SMARTRO indoor/outdoor thermometers, specifically models SC91 and SC62, to provide accurate temperature and humidity readings.

Important Note: This sensor is not compatible with SMARTRO models SC92, SC93, or SC31B.

محصول پای ته ورسیدview

مخکی view of the SMARTRO Wireless Remote Sensor

شکل 1: مخکی view of the SMARTRO Wireless Remote Sensor, showing the digital display for temperature and humidity, channel indicator, and signal icon.

شاته view of the SMARTRO Wireless Remote Sensor with battery compartment open

شکل 2: شاته view of the sensor with the battery cover removed, illustrating the battery compartment, °C/°F selection button, TX button, and 1 to 3 channel switch. Also visible is the wall-mounting hole.

The SMARTRO Wireless Remote Sensor (SENSOR92) is a compact, battery-powered device designed to transmit outdoor or indoor environmental data to a compatible main unit. It features a digital display showing current temperature (in °C or °F) and humidity (%RH). The sensor is equipped with a wall-mount hole and a table stand for versatile placement.

تنظیم او نصب کول

  1. د بیټرۍ نصب کول:

    • د سینسر په شا کې د بیټرۍ د برخې پوښ خلاص کړئ (شکل 2 ته مراجعه وکړئ).
    • Insert two (2) AA batteries, ensuring correct polarity (+ and -). Batteries are not included.
    • د بیټرۍ کمپارټ پوښ په خوندي ډول وتړئ.

  2. د چینل انتخاب:

    • د بیټرۍ په کڅوړه کې د ۱ څخه تر ۳ چینل سویچ ومومئ (شکل ۳ ته مراجعه وکړئ).
    • Select a channel (1, 2, or 3) for the sensor. If you are using multiple sensors, ensure each sensor is set to a different channel.

  3. Pairing with Main Unit:

    • Place the sensor within close proximity to your SMARTRO main unit (e.g., SC91 or SC62).
    • On the sensor, press the "TX" button (Transmit button) located inside the battery compartment (refer to Figure 2). This will send a signal to the main unit.
    • Follow the pairing instructions for your specific SMARTRO main unit to establish a connection. The main unit should display the sensor's readings.

  4. ځای په ځای کول:

    • The sensor can be placed on a flat surface using its integrated stand or mounted on a wall using the wall-mount hole.
    • For outdoor use, choose a location that is protected from direct sunlight and heavy rain to ensure accuracy and longevity. The transmission range is up to 200ft/60m in an open area.
    SMARTRO Wireless Remote Sensor mounted on an outdoor wall, showing wireless signal transmission

    شکل 3: Example of outdoor sensor placement, demonstrating its wireless transmission capability to the main unit.

عملیاتي لارښوونې

  • د تودوخې واحد انتخاب (°C/°F):

    • To switch between Celsius (°C) and Fahrenheit (°F), open the battery compartment cover.
    • Press the "°C/°F" selection button located inside the compartment (refer to Figure 2). The display will update accordingly.

  • د لوستلو ښودنه:

    • The sensor's digital display shows the current temperature and humidity readings.
    • These readings are also transmitted wirelessly to your paired SMARTRO main unit.

ساتنه

  • د بیټرۍ بدلول:

    • When the battery indicator on the sensor or main unit shows low power, replace both AA batteries promptly.
    • Ensure proper polarity during installation.

  • پاکول:

    • Wipe the sensor's exterior with a soft, damp ټوکر د کثافاتو پاکوونکي مه کاروئ یا وسیله په اوبو کې ډوب کړئ.

  • د چاپیریال ساتنه:

    • Keep the sensor away from direct sunlight and heavy rain to prevent damage and ensure accurate readings.

د ستونزو حل کول

ستونزهاحتمالي لاملد حل لاره
No readings on main unit / Sensor display blank.
  • ټیټ یا مړه بیټرۍ.
  • د بیټرۍ غلط قطبیت.
  • سینسر د اصلي واحد سره نه دی جوړ شوی.
  • سینسر د حد څخه بهر دی.
  • لاسوهنه.
  • بیټرۍ د نوي AA بیټرۍ سره بدل کړئ.
  • د بیټرۍ سمت چیک کړئ.
  • Press the "TX" button on the sensor and re-pair with the main unit.
  • سینسر اصلي واحد ته نږدې کړئ.
  • Relocate sensor away from electronic devices that may cause interference.
د تودوخې/رطوبت ناسمې شمېرې.
  • Sensor exposed to direct sunlight or moisture.
  • Sensor placed near heat sources or vents.
  • Sensor not calibrated (not user-adjustable).
  • Relocate sensor to a shaded, well-ventilated area, protected from rain.
  • Move sensor away from heat/cold sources.
  • If readings persist, contact customer support.
Main unit not receiving signal from sensor.
  • Sensor channel not matching main unit.
  • Obstructions between sensor and main unit.
  • Verify the channel switch setting on the sensor matches the selected channel on the main unit.
  • Minimize walls, large metal objects, or other obstructions between the sensor and main unit.

مشخصات

  • ماډل: SENSOR92
  • مطابقت: SMARTRO SC91, SC62 (Not compatible with SC92, SC93, SC31B)
  • د بریښنا سرچینه: 2 x AA بیټرۍ (شامل ندي)
  • د لېږد لړۍ: تر ۲۰۰ فوټو / ۶۰ متره پورې (خلاصه سیمه)
  • چینلونه: 3 د انتخاب وړ چینلونه
  • د تودوخې ښودنه: °C / °F د انتخاب وړ
  • د تودوخې زغم: +/- 5 ° F
  • د رطوبت زغم: +/- 5٪ RH
  • مواد: پلاستیک
  • ابعاد (تقریبا): ۱۵ انچه (اوږدوالی)
  • وزن (نږدې): 2.46 اونس
  • د ارتباط ټیکنالوژي: RF
  • د ښودلو ډول: ډیجیټل
  • د محصول پاملرنه: Keep away from direct sunlight and rain.

تضمین او ملاتړ

SMARTRO products are designed for reliability and performance. For warranty information or technical support, please contact SMARTRO customer service. Details can often be found on the official SMARTRO webسایټ یا ستاسو د پیرود پلیټ فارم له لارې.

جوړونکی: سمارټرو

بریښنالیک: support@smartro.co

Please have your model number (SENSOR92) and purchase details ready when contacting support.

© ۲۰۲۵ سمارټرو. ټول حقونه خوندي دي.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.