پیژندنه
The Keychron K6 Pro is a 65% layout wireless custom mechanical keyboard designed for enhanced typing experience and versatility. It features QMK/VIA programmability, hot-swappable switches, and supports both Bluetooth 5.1 wireless and USB-C wired connections. This keyboard is compatible with macOS, Windows, and Linux operating systems.
د بسته محتويات
Please verify that all items are present in your Keychron K6 Pro package:
- 1x په بشپړه توګه راټول شوی کیبورډ
- 1x Type-A تر Type-C کیبل
- 1x Mac and Windows Keycaps Set
- 1x کیکیپ پلر
- 1x سویچ پلر
- 1x هیکس کیلي
- ۱x سکریو ډرایور (د بکس په ښکته برخه کې موقعیت لري)
چمتو کول
1. د کیبورډ سره نښلول
The K6 Pro supports both wireless Bluetooth 5.1 and wired USB-C connections.
بلوتوث پیوستون
- Ensure the keyboard's mode switch (located on the side) is set to 'Bluetooth'.
- On your device (laptop, phone, tablet), enable Bluetooth and search for 'Keychron K6 Pro'.
- Select the keyboard to pair. The keyboard can connect to up to 3 devices simultaneously. Switch between paired devices using Fn1 + Q, Fn1 + W, or Fn1 + E.
د تار نښلول:
- Ensure the keyboard's mode switch is set to 'Cable'.
- Connect the keyboard to your computer using the provided USB-C cable.
۳.۲. د عملیاتي سیسټم سویچ
The K6 Pro has a dedicated switch to toggle between macOS and Windows layouts. Locate the switch on the side of the keyboard and set it to your desired operating system for optimal key functionality.
3. د کیبورډ چارج کول
Connect the USB-C cable to the keyboard and a power source (e.g., computer USB port, wall adapter). The keyboard features a rechargeable battery. An indicator light will show charging status.
عملیات
1. Key Combinations (Fn Keys)
The K6 Pro utilizes Fn (Function) key combinations to access various features and multimedia controls. Refer to the tables below for common combinations:
Fn1 + Keys:
Fn2 + Keys:
۳. د QMK/VIA اصلاح کول
The K6 Pro is fully programmable with QMK/VIA firmware. This allows you to remap any key, create macro commands, and customize lighting effects. To use QMK/VIA:
- کیبورډ د USB-C کیبل له لارې خپل کمپیوټر سره وصل کړئ.
- Download and install the VIA software or access the VIA web غوښتنلیک
- Follow the on-screen instructions to customize your keymap and macros. Note: Key remapping is performed in wired mode, but the changes apply to both wired and wireless modes.
۵.۲. ګرم بدلیدونکي سویچونه
The K6 Pro features hot-swappable sockets, allowing you to change mechanical switches without soldering. It supports most 3-pin and 5-pin MX mechanical switches.
- To remove a switch, use the provided switch puller to gently grip and pull the switch upwards.
- To install a new switch, align the pins of the new switch with the holes on the PCB and press down firmly until it clicks into place. Ensure pins are not bent.
4. د RGB بیک لایټ کنټرول
The keyboard features RGB backlighting. Use Fn1 + Light effect key to cycle through different backlight effects. Use Fn2 + Left/Right arrow keys to change backlight colors.
ساتنه
۱. د کیبورډ پاکول
د خپل کیبورډ پاکولو لپاره، لومړی یې د بریښنا له ټولو سرچینو څخه جلا کړئ. یو نرم، لینټ نه لرونکی ټوکر وکاروئ چې لږ څهampened with water or a mild cleaning solution. For deeper cleaning, remove keycaps using the provided keycap puller and use compressed air to clear debris from between switches.
۶.۲. د سویچ او کی کیپ بدلول
As the K6 Pro is hot-swappable, you can easily replace individual switches or keycaps. Use the provided tools for safe removal and installation. Ensure proper alignment to avoid damaging pins or sockets.
د ستونزو حل کول
- کیبورډ د بلوتوث له لارې نه نښلي: Ensure the keyboard is in Bluetooth mode and discoverable. Remove previous pairings from your device and try pairing again. Ensure the keyboard is charged.
- کیلي ځواب نه ورکوي: Check if the keyboard is in the correct operating system mode (Mac/Windows). If using wired mode, ensure the cable is securely connected. If a specific key is not working, consider hot-swapping the switch for a new one.
- د شاليد مسلې: Use the Fn key combinations to adjust brightness or cycle through effects. Ensure the keyboard is not in a low-power state.
- QMK/VIA not detecting keyboard: Ensure the keyboard is connected via USB-C cable and the mode switch is set to 'Cable'. Restart the VIA software or web غوښتنلیک
مشخصات
| برانډ | کیکرون |
| د ماډل نوم | کیکرون K6 پرو |
| د ماډل شمیره | K6P-H1 |
| د ارتباط ټیکنالوژي | بلوتوث 5.1، USB-C |
| د کیبورډ ترتیب | 65% (68 keys), QWERTY |
| Mechanical Switch Model | Keychron K Pro Red (Linear) |
| ګرم-بدلول وړ | Yes (3-pin and 5-pin MX mechanical switches) |
| شاته رڼا کول | RGB |
| د پروګرام وړتیا | QMK/VIA enabled |
| مطابقت لرونکي عملیاتي سیسټمونه | macOS، وینډوز، لینکس |
| د بریښنا سرچینه | د چارج وړ بیټرۍ |
| مواد | Plastic enclosure, Steel plate |
| اضافي ځانګړتیاوې | PCB-mounted screw-in stabilizers, Sound-absorbing foam, Silicone dampening bottom pad, Double-shot PBT Keycaps |
تضمین
The Keychron K6 Pro comes with a 1-year limited warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Keychron webسایټ یا د پیرودونکي ملاتړ سره اړیکه ونیسئ.
ملاتړ
For further assistance, technical support, or to download the latest firmware and VIA software, please visit the official Keychron webسایټ. تاسو کولی شئ د اضافي مرستې لپاره FAQs او د ټولنې فورمونه هم ومومئ.