Instruction Manual for DEDRA 18V Cordless Angle Grinder

محصول پای ته ورسیدview

The DEDRA SAS+ALL DED7051 18V Cordless Angle Grinder is designed for cutting and grinding tasks. This tool features a powerful motor capable of reaching speeds up to 8500 RPM, compatible with 125 mm and 115 mm diameter discs. Its ergonomic design, lightweight construction (2.2 kg), and fiberglass-reinforced nylon housing ensure durability and comfortable operation.

Key features include a safety switch that interrupts power if excessive pressure is applied to the workpiece, preventing damage or overheating. The quick-release system for discs, a two-position side handle, and a rubberized grip enhance user comfort and control. The disc changing key is conveniently stored within the side handle.

Image: DEDRA 18V Cordless Angle Grinder, showing the main unit with the side handle and disc guard installed.

د خوندیتوب معلومات

تل د دې بریښنا وسیلې سره چمتو شوي ټول خوندیتوب اخطارونه، لارښوونې، انځورونه او مشخصات ولولئ او پوه شئ. د لاندې لیست شوي ټولو لارښوونو په تعقیب کې پاتې راتلل ممکن د بریښنا شاک، اور، او/یا جدي ټپي کیدو لامل شي.

• د کاري ساحې خوندیتوب: د کار ساحه پاکه او ښه روښانه وساتئ. ګډوډ یا تیاره سیمې د پیښو لامل کیږي. د بریښنا وسایل په چاودیدونکو فضا کې مه کاروئ، لکه د اور اخیستونکي مایعاتو، ګازونو یا دوړو په شتون کې.
• بریښنایی خوندیتوب: د ځمکې یا ځمکې لاندې سطحونو سره د بدن د تماس څخه ډډه وکړئ، لکه پایپونه، ریډیټرونه، رینجونه او یخچالونه. که ستاسو بدن په ځمکه کې وي یا په ځمکه کې وي د بریښنا شاک ډیر خطر شتون لري.
• شخصي خوندیتوب: Always wear eye protection. Use personal protective equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection for appropriate conditions.
• د وسایلو کارول او ساتنه: د بریښنا وسیله مه مجبوروئ. د خپل غوښتنلیک لپاره د بریښنا سمه وسیله وکاروئ. د بریښنا سمه وسیله به دا کار په ښه او خوندي نرخ سره ترسره کړي د کوم لپاره چې ډیزاین شوی.
• د خوندیتوب سویچ: The grinder is equipped with a safety switch that cuts off power if excessive pressure is applied to the workpiece. This prevents damage to the tool and potential overheating. Do not attempt to bypass or disable this safety feature.
• د ډیسک مطابقت: Only use grinding and cutting discs with a diameter of 125 mm or 115 mm that are rated for the grinder's maximum RPM.

په بکس کې څه دي

د بسته بندۍ پرانستلو سره، مهرباني وکړئ تصدیق کړئ چې ټولې برخې شتون لري او زیانمن شوي ندي:

• 1 x DEDRA 18V Cordless Angle Grinder (Main Unit)
• ۱ x مرستندویه اړخ لاستی
• 1 x Disc Guard
• 1 x Two-hole Wrench for Disc Change
• یادونه: بیټرۍ او چارجر شامل نه دي او باید په جلا توګه وپیرل شي.

Image: A visual reminder that the battery and charger are sold separately from the angle grinder unit.

چمتو کول

1. د غاړې لاستی نښلول:

   The auxiliary side handle can be screwed into either of the two threaded holes on the grinder's gear housing, depending on your preferred working position and hand dominance. Ensure it is tightened securely.

   

   Image: The angle grinder with the side handle attached, demonstrating its position.

2. Mounting the Disc Guard:

   Position the disc guard over the spindle housing. Rotate it until it covers the disc adequately for your application, providing maximum protection. Tighten the guard's clamping mechanism firmly to prevent movement during operation.
3. Installing the Grinding/Cutting Disc:

   Ensure the grinder is switched off and the battery is removed before installing or changing discs. Press the spindle lock button to secure the spindle. Place the inner flange onto the spindle, then position the grinding or cutting disc onto the inner flange. Secure the disc with the outer flange and tighten it using the provided two-hole wrench. Release the spindle lock.

   

   انځور: پورته view of the angle grinder showing the disc guard and the spindle assembly where the disc is mounted.

4. د بیټرۍ داخلول:

   Align the battery pack with the battery slot at the rear of the grinder handle. Slide the battery into place until it clicks securely. Ensure it is fully seated before operation.

   

   انځور: شاته view of the angle grinder, highlighting the battery insertion slot.

عملیاتي لارښوونې

1. د ګرینډر پیل کول:

   With the battery inserted and disc securely mounted, hold the grinder firmly with both hands. Press the power switch to start the tool. Allow the disc to reach full speed before making contact with the workpiece.
2. Grinding and Cutting:

   Apply light, consistent pressure. Do not force the tool. The integrated safety switch will activate and cut power if excessive pressure is detected, protecting the tool from overload and overheating. If this occurs, reduce pressure and restart the tool.

3. د ګرینډر بندول:

   Release the power switch to stop the tool. Wait for the disc to come to a complete stop before setting the grinder down or performing any adjustments.

ساتنه

• پاکول: Regularly clean the ventilation openings of the grinder to prevent dust accumulation, which can lead to overheating. Use a soft brush or compressed air.
• د ډیسک معاینه: Before each use, inspect the grinding or cutting disc for cracks, chips, or excessive wear. Replace damaged discs immediately.
• ذخیره کول: Store the grinder in a dry, secure place, out of reach of children. Remove the battery when storing for extended periods.
• د بیټرۍ پاملرنه: Follow the manufacturer's instructions for charging and storing the battery pack. Do not expose batteries to extreme temperatures or moisture.

د ستونزو حل کول

مشخصات

تضمین او ملاتړ

Dedra products are designed for quality and reliability, undergoing testing at every stage of their lifecycle to ensure high standards. While specific warranty details are not provided in this manual, for any product support, technical assistance, or warranty claims, please contact Dedra customer service or refer to the official Dedra webد خورا تازه معلوماتو لپاره سایټ.

You can visit the official Dedra store on Amazon for more information and contact options: Dedra Store