Gebildet 12mm Blue LED Metal Indicator Light 110V-220VAC Instruction Manual

1. محصول ختم شوview

This manual provides detailed instructions for the installation, operation, and maintenance of the Gebildet 5-piece 12mm Blue LED Metal Indicator Light. These lights are designed for various applications requiring visual status cues, such as in power systems, telecommunications, machine tools, motors, and household appliances.

کلیدي ځانګړتیاوې:

• درجه بندي Voltage: AC 110V-220V, ensuring broad compatibility.
• دوامدار ساختمان: Shell made from brass plated nickel stainless steel for longevity.
• پنروک: IP65 protection grade, suitable for use in various environments.
• د انرژي موثریت: Utilizes excellent LED chips for low power consumption (0.5W).
• اسانه نصب کول: Designed for flush mounting with a 12mm hole diameter.

Image 1.1: A set of five Gebildet 12mm Blue LED Metal Indicator Lights, showcasing their compact design and pre-wired connections.

2. تخنیکي مشخصات

Refer to the table below for detailed technical specifications of the indicator lights:

Image 2.1: Detailed technical drawing showing dimensions and key specifications of the indicator light.

3. د خوندیتوب احتیاطي تدابیر

Please read and understand all safety information before installing or operating the indicator lights. Failure to follow these instructions may result in electric shock, fire, or personal injury.

• د بریښنا خطر: Always disconnect power to the circuit before installing or servicing the indicator lights.
• والیtage مطابقت: د عملیاتي حجم ډاډ ترلاسه کړئtage of your application matches the 110V-220VAC rating of these lights. Connecting to an incorrect voltage can damage the product and pose a safety risk.
• مناسب تارونه: Follow correct wiring polarity. For 110V-220VAC models, the yellow wire is typically positive, and the black wire is negative. Consult a qualified electrician if unsure.
• د چاپیریال شرایط: While waterproof (IP65), avoid submerging the lights or exposing them to extreme conditions beyond their specified operating temperature range.
• خوندي نصب کول: Ensure the lights are securely mounted to prevent loosening or accidental dislodgement.

4. د نصب لارښود

4.1 پورته کول

1. Select a suitable location on your panel or enclosure for the indicator light.
2. Using a 12mm drill bit, carefully drill a mounting hole through the panel. Ensure the panel thickness is between 1mm and 8mm.
3. Insert the indicator light into the drilled hole from the front of the panel.
4. From the back of the panel, secure the light using the provided washer and nut. Tighten the nut to a torque of 5-15Nm to ensure a firm fit without over-tightening.

4.2 تارونه

The indicator lights come pre-wired with approximately 15cm long cables for easy connection.

1. Identify the power source for your application. Ensure the power is OFF before proceeding.
2. سره وصل کړئ ژیړ تار of the indicator light to the مثبت (+) terminal of your 110V-220VAC power supply.
3. سره وصل کړئ تور تار of the indicator light to the منفي (-) terminal of your 110V-220VAC power supply.
4. ډاډ ترلاسه کړئ چې ټولې اړیکې خوندي او په سمه توګه موصل شوي دي ترڅو د لنډ سرکټ مخه ونیول شي.
5. Once wiring is complete, restore power to the circuit and test the indicator light.

انځور ۲: یوه نږدې انځور view of the indicator lights, highlighting the yellow and black pre-wired connections for electrical hookup.

5. عملیات

Once properly installed and wired, the Gebildet 12mm Blue LED Metal Indicator Light will illuminate when power is supplied to its terminals. It serves as a visual signal to indicate the status of the circuit or device it is connected to. The light will remain on as long as power is present and correctly connected.

Image 5.1: The indicator lights are designed with IP65 protection, making them splashproof and suitable for various environments.

6. ساتنه

These LED indicator lights are designed for low maintenance and long operational life. Follow these general guidelines:

• پاکول: If necessary, gently wipe the surface of the indicator light with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the metal finish or LED lens.
• معاینه: Periodically check the mounting nut for tightness and the wiring connections for any signs of wear or corrosion.
• د چاپیریال ساتنه: Ensure the lights are not exposed to conditions beyond their IP65 rating or specified temperature range to maintain their performance and lifespan.

7. ستونزه حل کول

If your Gebildet LED indicator light is not functioning as expected, consider the following troubleshooting steps:

• رڼا چې روښانه نه کوي:
  • د بریښنا رسولو چک کول: Verify that power is being supplied to the circuit where the indicator light is installed.
  • د تارونو معاینه کول: Ensure the yellow wire is connected to the positive terminal and the black wire to the negative terminal of the power source. Check for loose or incorrect connections.
  • تصدیق والیومtage: تایید کړه چې والیtage supplied to the light is within the 110V-220VAC range.
  • د زیانونو لپاره چک کول: Inspect the light for any visible physical damage.
• موقتي عملیات:
  • تړلې اړیکې: د تارونو ټولې اړیکې د ټینګښت لپاره بیا وګورئ.
  • د بریښنا بدلونونه: Ensure the power supply is stable and not experiencing intermittent interruptions.

که دا ګامونه ستونزه حل نه کړي، مهرباني وکړئ د پیرودونکو ملاتړ سره اړیکه ونیسئ.

۷. تضمین او د پیرودونکو ملاتړ

Gebildet products are manufactured to high-quality standards. For specific warranty information, please refer to the product packaging or contact Gebildet customer support directly. If you encounter any issues or have questions regarding the installation or operation of your indicator lights, please reach out to the manufacturer's customer service team for assistance.