1. پیژندنه
The CAD Audio WX50 is a digital frequency agile single-channel UHF handheld wireless system designed for clear vocal pickup and reliable performance. This system offers plug-and-play simplicity with its QuickMic receiver, which connects directly into a mixer or amplifier's 1/4-inch jack. The handheld transmitter features a CADLive-style capsule for professional vocal clarity and includes built-in mute and battery indicators.
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your WX50 wireless system.
Image 1: CAD Audio WX50 Handheld Wireless Microphone and QuickMic Receiver.
2. د بسته محتويات
د تنظیم کولو دمخه، مهرباني وکړئ ډاډ ترلاسه کړئ چې ټولې برخې شتون لري:
- WX50 Handheld Transmitter (Microphone)
- QuickMic Receiver
- 1/4-inch to 1/8-inch Gold Adapter
- Power Cord (for receiver charging)
- No-slip Ring
- پوپ چاter
- 1 Lithium Ion Battery (included, typically pre-installed in transmitter)
۴. د تنظیم لارښوونې
۳.۱ د رسیدونکي چارج کول
- Locate the DC 5V Charging Port on the QuickMic Receiver.
- Connect the provided power cord to the charging port and a suitable USB power source (not included).
- The Charge Indicator LED will illuminate red while charging and turn green when fully charged.
۵.۲ په ټرانسمیټر کې د بیټرۍ نصب کول
- د بیټرۍ برخې ته د لاسرسي لپاره د لاسي ټرانسمیټر لاندې کیپ خلاص کړئ.
- Insert the included Lithium Ion battery, ensuring correct polarity (+/-).
- لاندې کیپ په خوندي ډول بیرته په ټرانسمیټر باندې ولګوئ.
۴.۱ د رسیدونکي سره نښلول
- Plug the QuickMic Receiver directly into a 1/4-inch input jack on your mixer, amplifier, or PA system. If your input is 1/8-inch, use the provided 1/4-inch to 1/8-inch gold adapter.
- Ensure the receiver is securely seated in the input.
3.4 Powering On and Frequency Selection
- Press and hold the On/Off Switch on the QuickMic Receiver to power it on. The RF Indicator will light up.
- Press and hold the On/Off Switch on the handheld transmitter to power it on. The Frequency Display will illuminate.
- The system will automatically pair. If pairing does not occur, or if you experience interference, press the Frequency Selection Button on the handheld transmitter to cycle through available frequencies until a clear channel is found. The RF Indicator on the receiver will show red for Channel A and green for Channel B.
Image 2: Labeled diagram of the WX50 Handheld Transmitter and QuickMic Receiver components.
4. عملیاتي لارښوونې
۳.۳ د مایکروفون کارول
- Once powered on and paired, the microphone is ready for use.
- Speak directly into the top grille of the microphone for optimal sound pickup.
- Use the On/Off Mute Switch on the handheld transmitter to temporarily mute the microphone output without powering it down.
4.2 Monitoring Battery Life
- The handheld transmitter features a Low-Battery LED Indicator. This indicator will illuminate when the battery level is low, signaling that the battery needs to be charged or replaced soon.
- The QuickMic Receiver also has a Low Battery Indicator (red = needs charged, blue = on).
۵.۳ د بېسیم رینج
The WX50 system offers a wireless range of approximately 50 meters (164 feet) under optimal conditions. Factors such as obstacles, other wireless devices, and environmental interference can affect the actual operating range.
Image 3: Key features of the CAD Audio WX50 system, including Frequency Agile Design, Low Battery Indicator, and 50m Wireless Range.
5. ساتنه
5.1 د بیټرۍ پاملرنه
- Recharge the receiver's battery when the charge indicator shows low.
- For the handheld transmitter, replace or recharge the Lithium Ion battery when the low-battery indicator activates.
- If storing the unit for an extended period, remove batteries from the transmitter to prevent leakage.
5.2 پاکول
- Wipe the microphone and receiver surfaces with a soft, dry cloth.
- سخت کیمیاوي مواد، محلولونه، یا د کثافاتو پاکوونکي مه کاروئ.
- Periodically clean the pop filter and microphone grille to maintain audio quality.
5.3 ذخیره کول
Store the WX50 system in a cool, dry place away from direct sunlight and extreme temperatures. Protect the components from dust and physical damage.
6. ستونزه حل کول
If you encounter issues with your CAD Audio WX50 system, refer to the following common problems and solutions:
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| هیڅ غږ یا وقفه ای غږ نشته | Low battery in transmitter or receiver; Interference; Microphone muted; Receiver not properly connected; Transmitter and receiver not paired. | Charge/replace batteries. Change frequency on transmitter. Unmute microphone. Ensure receiver is fully inserted into input. Re-pair transmitter and receiver. |
| تحریف شوی غږ | Input level too high; Interference; Microphone too close to sound source. | Adjust input gain on mixer/amplifier. Change frequency. Maintain appropriate distance from sound source. |
| د بې سیم لنډ واټن | Obstacles blocking signal; Environmental interference; Low battery. | Ensure clear line of sight between transmitter and receiver. Change frequency. Charge/replace batteries. |
| ریسیور نه چالانیږي | Receiver battery depleted; Faulty power cord. | Charge receiver battery. Try a different power cord or USB power source. |
7. مشخصات
Detailed technical specifications for the CAD Audio WX50 system:
- د موډل نوم: WX50
- د ارتباط ټیکنالوژي: معاون
- د نښلونکي ډول: 6.35 mm Jack (1/4 inch TRS)
- رنګ: تور
- قطبي بڼه: یو طرفه
- د مایکروفون فارم فکتور: د مایکروفون سیسټم
- د بریښنا سرچینه: د بیټرۍ چلول (1 لیتیم آیون بیټرۍ شامله ده)
- د سیګنال څخه تر شور پورې اړوند تناسب: 70 dB
- د چینلونو شمیر: 16
- د اورېدو وړ غږ: ۴۵ ډیسیبلونه
- د احاطې مواد: پلاستیک
- د تعدد ځواب: ۲۰ هرټز - ۴۰ کلو هرټز
- انډول کول: High Definition Digital QPSK
- د بریښنا لیږد: 10mW
- حساسیت: -43dBV (6.8mV) @ 1Pa
- د فریکونسی بانډ: ۲۴۰۲ میګاهرتز - ۲۴۸۰ میګاهرتز
- د بیټرۍ ژوند: > 8 ساعته
- ابعاد: ۴.۲۵" x ۱.۸۹" x ۱.۳۸" (۱۰.۸ سانتي متره x ۴.۸ سانتي متره x ۳.۵ سانتي متره)
- د توکي وزن: 12 اونس (0.34 کیلو ګرامه)
انځور 4: اوورview of CAD Audio WX50 technical specifications.
Image 5: Information on WX50 battery life, dimensions, and weight.
8. د تضمین معلومات
The CAD Audio WX50 Digital Frequency Agile Single Channel UHF Handheld Wireless System is covered by a د جوړونکي دوه کلن تضمین. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, or to initiate a warranty claim, please refer to the official CAD Audio webسایټ یا د دوی پیرودونکي ملاتړ سره اړیکه ونیسئ.
9. ملاتړ
For further assistance, technical support, or inquiries regarding your CAD Audio WX50 system, please visit the official CAD Audio webسایټ یا د دوی د پیرودونکو خدماتو څانګې سره اړیکه ونیسئ. د اړیکو معلومات معمولا د تولید کونکي په ویب پاڼه کې موندل کیدی شي webسایټ یا د محصول بسته بندي.