1. پیژندنه
This manual provides essential information for the safe and effective installation, operation, and maintenance of the JIAYIN JYPC-4 Series Electromagnetic Plunger Pump. This pump is designed for applications requiring precise water suction and delivery, commonly found in hot water dispensers and similar systems. Please read this manual thoroughly before using the product and retain it for future reference.
2. محصول ختم شوview
The JIAYIN JYPC-4 is a compact and efficient electromagnetic plunger pump. Key features include:
- درجه بندي Voltage: AC 100V - 120V, 60Hz, 22W
- د جریان کچه: 750 ±15% cc/min
- کاري فشار: ≥1.5 bar
- کاري منځنی: Water or non-corrosive liquids
- مواد: دوامدار پلاستيکي جوړښت
- د موټر چلولو حالت: برقی مقناطیسی
شکل ۳: زاویه لرونکی view of the JIAYIN JYPC-4 Series electromagnetic plunger pump, showing its compact design and main components.
2 شکل: تړل view of the JIAYIN JYPC-4 pump, highlighting the electrical terminals and the product specification label.
Figure 3: Technical drawing providing detailed dimensions of the JIAYIN JYPC-4 pump in millimeters.
3. تخنیکي مشخصات
| پیرامیټر | ارزښت |
|---|---|
| برانډ | JIAYIN |
| ماډل | JYPC-4 |
| درجه بندي Voltage | AC 100V - 120V, 60Hz |
| د بریښنا مصرف | 22W |
| د جریان کچه | 750 ±15% cc/min |
| کاري فشار | ≥1.5 bar |
| د پمپ ډول | پلنجر پمپ |
| Pump Shaft Position | افقی |
| Impeller Structure | Closed Impeller |
| Number of Impellers | واحد ایسtage |
| خالص وزن | 137 ±5g (approx. 4.8 oz) |
| مواد | پلاستیک |
| د موصلیت ټولګي | H |
| د موټر چلولو حالت | برقی مقناطیسی |
| د پیوستون طریقه | کینول |
| محیطي تودوخه | Ta 70℃ (158°F) |
| د مایع د حرارت درجه | Tf 60℃ (140°F) |
| UPC | 607469294553 |
4. د خوندیتوب لارښوونې
د ټپي کیدو یا زیان د مخنیوي لپاره، تل لاندې خوندیتوب احتیاطي تدابیر په پام کې ونیسئ:
- بریښنایی خوندیتوب: Ensure the pump is connected to a power source matching the specified voltage (AC 100V-120V, 60Hz). Disconnect power before any installation, maintenance, or troubleshooting.
- د مایع مطابقت: Use only with water or non-corrosive liquids. Using corrosive fluids can damage the pump and void the warranty.
- د تودوخې محدودیتونه: Do not exceed the maximum ambient temperature of 70℃ (158°F) or fluid temperature of 60℃ (140°F).
- مناسب نصب کول: Install the pump securely in a horizontal position as specified. Ensure all connections are tight to prevent leaks.
- د وچ چلولو څخه ډډه وکړئ: Do not operate the pump without fluid, as this can cause severe damage.
- وینټیلیشن: د پمپ شاوخوا مناسب هوا ورکول ډاډمن کړئ ترڅو د ډیر تودوخې مخه ونیول شي.
- ماشومان او څاروي: Keep the pump and its components out of reach of children and pets.
5. ترتیب او نصب کول
د سم نصبولو لپاره دا ګامونه تعقیب کړئ:
- پورته کول: Securely mount the pump in a horizontal position using appropriate fasteners. Refer to Figure 3 for dimensions and mounting points.
- د مایعاتو اړیکې: Connect the inlet and outlet tubes to the pump's cannula ports. Ensure a tight fit to prevent leaks. For flow testing, a 13.8-inch silicon tube with an outer diameter of 0.31 inches and an inner diameter of 0.16 inches is recommended for the water inlet port.
- بریښنایی پیوستون: Connect the pump to a compatible AC 100V-120V, 60Hz power supply. Ensure wiring is done by a qualified professional if you are unsure.
- پرائمینګ (که اړتیا وي): Depending on your system, you may need to prime the pump by ensuring the fluid path is filled with liquid before initial operation to prevent dry running.
6. عملیات
Once installed and connected, operate the pump as follows:
- پاور آن: Apply power to the pump. The electromagnetic mechanism will activate, initiating the plunger action.
- د جریان څارنه: Observe the fluid flow to ensure it is within the specified range of 750 ±15% cc/min and that the working pressure is maintained at or above 1.5 bar.
- دوامداره عملیات: The pump is designed for continuous operation (ED100%).
- بندول: Disconnect power when the pump is not in use or when maintenance is required.
7. ساتنه
منظم ساتنه د غوره فعالیت ډاډ ورکوي او د پمپ عمر اوږدوي:
- پاکول: Periodically inspect the pump for any external dirt or debris. Clean with a soft, damp ټوکر سخت کیمیاوي توکي مه کاروئ.
- اړیکې: Regularly check all fluid and electrical connections for tightness and signs of wear or corrosion.
- د مایعاتو کیفیت: Ensure the working fluid remains clean and free of particles that could clog the pump. If the fluid contains impurities, consider adding a filter to the system.
- ذخیره کول: If storing the pump for an extended period, ensure it is clean, dry, and stored in a cool, dry place away from direct sunlight and extreme temperatures.
8. ستونزه حل کول
د عامو ستونزو او د هغوی د احتمالي حل لارو لپاره لاندې جدول ته مراجعه وکړئ:
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| پمپ پیل نه کوي | بریښنا نشته ناسم والیtage د بریښنایی پیوستون خلاصول | د بریښنا سرچینه چیک کړئ حجم تایید کړئtage matches pump rating د بریښنایی پیوستون خوندي کول |
| Low or no fluid flow | Inlet/outlet clogged په سیسټم کې هوا (پرائم نه ده) Leak in fluid connections وچ چلول | Inspect and clear blockages پمپ لومړی اړیکې چک او ټینګ کړئ Ensure fluid supply is constant |
| د عملیاتو پرمهال غیر معمولي شور | په سیسټم کې هوا لوز نصب کول داخلي خنډ | د سیسټم څخه وینه هوا د نصب کولو پیچونه ټینګ کړئ Inspect for foreign objects (disconnect power first) |
| Leakage from connections | تړلې اړیکې Damaged tubing/cannula | Tighten all fluid connections Replace damaged tubing or cannula |
9. تضمین او ملاتړ
For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase. Any unauthorized disassembly or modification of the pump will void the warranty.