PowerDrive PWD400

د پاور ډرایو PWD400 400 واټ پاور انورټر لارښوونې لارښود

ماډل: PWD400

محصول پای ته ورسیدview

The PowerDrive PWD400 is a 400-watt power inverter designed to convert 12V DC power from your vehicle's battery into 110V AC power. This allows you to operate various AC devices and charge USB-powered electronics while on the go. It features two 3-prong AC outlets and dual USB ports (Standard 2.4A and USB-C 3.0A) for versatile power solutions.

PowerDrive PWD400 Power Inverter, top-down view showing AC outlets and USB ports

انځور: پورته-ښکته view of the PowerDrive PWD400 Power Inverter, highlighting its two AC outlets and dual USB ports.

په بکس کې څه دي

  • PowerDrive PWD400 Power Inverter
  • 12-volt plug (cigarette lighter adapter)
  • 36-inch battery clamp کیبلونه
PowerDrive PWD400 with included 36-inch DC cable and 36-inch cables

Image: The PowerDrive PWD400 inverter shown with its included 36-inch DC cable (cigarette lighter plug) and 36-inch battery clamp کیبلونه

چمتو کول

د 12V بریښنا سرچینې سره نښلول:

  1. Using the 12-volt plug (cigarette lighter adapter): Insert the 12-volt plug into your vehicle's cigarette lighter socket. Ensure a secure connection. This method is suitable for lower power applications.
  2. Using the 36-inch battery clamp کیبلونه: For higher power applications or direct battery connection, attach the red clamp ستاسو د 12V بیټرۍ مثبت (+) ټرمینل ته او تور clamp to the negative (-) terminal. Connect the other end of the cables to the corresponding terminals on the inverter. Ensure all connections are tight and secure.

مهم: Always ensure your vehicle's engine is running when using the inverter for extended periods or with high-wattage devices to prevent draining the vehicle's battery.

PowerDrive PWD400 connected via 12V plug

Image: The PowerDrive PWD400 inverter connected to a 12V power source using the cigarette lighter plug.

PowerDrive PWD400 connected via battery clamps

Image: The PowerDrive PWD400 inverter connected to a battery using the included battery clamp کیبلونه

عملیاتي لارښوونې

  1. فعالول: After connecting the inverter to a 12V power source, press the power button on the inverter. The power indicator light should illuminate, indicating it is ready for use.
  2. د AC وسایلو نښلول: Plug your AC devices (up to 400 watts continuous power) into the two 3-prong AC outlets. Ensure the total wattage of all connected devices does not exceed 400 watts.
  3. د USB وسیلو چارج کول: Connect your USB-powered devices to the 2.4A USB port or the 3.0A USB-C port. These ports are ideal for charging smartphones, tablets, and other compatible electronics.
  4. د بریښنا بندول: When finished, disconnect all devices from the inverter, then press the power button to turn off the inverter. Finally, disconnect the inverter from the 12V power source.
Close-up of PowerDrive PWD400 outlets and ports

انځور: یو مفصل view of the PowerDrive PWD400's dual 3-prong AC outlets and the 2.4A USB and 3.0A USB-C ports.

ساتنه

  • پاکول: انورټر پاک او له دوړو او کثافاتو څخه پاک وساتئ. د پاکولو لپاره وچ، نرم ټوکر وکاروئ. د مایع پاکوونکو څخه کار مه اخلئ.
  • د فیوز بدلول: The PWD400 features removable ATC fuses for easy replacement. If the inverter stops functioning due to an overload or short circuit, check and replace the fuses as needed. Refer to the specifications for the correct fuse type and rating.
  • ذخیره کول: Store the inverter in a cool, dry place away from direct sunlight and moisture when not in use.

د ستونزو حل کول

The PowerDrive PWD400 is equipped with built-in protection features to ensure safe operation. If you encounter issues, consider the following:

  • د بریښنا تولید نشته:
    • Ensure the inverter is securely connected to the 12V power source.
    • Check if the vehicle's 12V socket or battery terminals are clean and free of corrosion.
    • Verify that the power button on the inverter is pressed and the indicator light is on.
    • Check the removable ATC fuses. Replace if blown.
  • د اوورلوډ محافظت:
    • If the inverter shuts down, it may be due to an overload. Disconnect the devices, reduce the total wattage, and restart the inverter. The inverter protects against exceeding its 400-watt continuous power rating.
  • د تودوخې څخه ډیر محافظت:
    • If the inverter becomes too hot, it will shut down to prevent damage. Allow it to cool down in a well-ventilated area before restarting. Ensure proper ventilation around the inverter during operation.
  • د لنډ سرکټ ساتنه:
    • The inverter is designed to protect against short circuits. If a short circuit occurs, the unit will shut down. Resolve the short circuit issue and restart the inverter.

مشخصات

فیچرمشخصات
د ماډل نومPWD400
دوامداره ځواک400 واټ
ننوتۍ جلدtage12V DC
د محصول Voltage110V AC
د AC سایټونهTwo 3-prong outlets
USB بندرونهOne Standard 2.4A USB, One 3.0A USB-C
کیبلونه شامل دي12-volt plug, 36-inch battery clamp کیبلونه
د ساتنې ځانګړتیاوېShort circuit, temperature, and overload protection
د توکي وزن۲.۴۵ پونډه
د محصول ابعاد12 x 8 x 3 انچه

تضمین او ملاتړ

This PowerDrive PWD400 Power Inverter comes with a 1-year limited warranty. For technical support, troubleshooting assistance, or warranty claims, please refer to the contact information provided with your product packaging or visit the official PowerDrive webسایټ

د نورو معلوماتو او سرچینو لپاره، تاسو کولی شئ لیدنه وکړئ PowerDrive Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.