محصول پای ته ورسیدview
The LIGHTAILING LED Lighting Kit is an accessory designed to illuminate your Lego 21335 Motorized Lighthouse model. This kit enhances the visual appeal of your model by adding functional lighting to various sections, including the lighthouse tower, the keeper's cottage, and the surrounding base. Please note: The Lego 21335 Motorized Lighthouse model is not included with this lighting kit.
Image: The Lego 21335 Motorized Lighthouse model fully illuminated by the LIGHTAILING LED lighting kit.
انځور: تفصیلي view of the illuminated interior of the lighthouse tower.
Video: A demonstration of the LIGHTAILING LED Lighting Kit installed on the Lego 21335 Motorized Lighthouse, showing various illuminated sections and effects.
د بسته محتويات
Upon opening your LIGHTAILING LED Lighting Kit, please verify that all the following components are present:
- 1 x LED Light Kit (various individual LED lights and connecting wires)
- 1 x Battery Box (for power supply, batteries not included)
- 1 x Paper Instruction Guide
Image: The complete contents of the LIGHTAILING LED Lighting Kit package.
د خوندیتوب لارښوونې
To ensure safe operation and prevent damage to the lighting kit or your Lego model, please adhere to the following guidelines:
- د بریښنا رسول: The power supply should be less than 5V. Using a higher voltage may cause damage to the LED components.
- د بیټرۍ ډول: If using the battery box, ensure you use three AA batteries (not included).
- سمبالول: Install the LED lights carefully. Avoid hard pulling, bending, or shaking the wires and components, as this can cause breakage.
- ازموینه: Before final installation, it is recommended to test the product to ensure it functions properly.
تنظیم او نصب کول
The installation of the LIGHTAILING LED Lighting Kit requires careful attention to detail. The provided paper instructions offer a visual guide. For additional assistance, you may scan the QR code on the product box for online installation videos.
د نصبولو عمومي ګامونه:
- چمتووالی: Ensure your Lego 21335 Motorized Lighthouse model is fully assembled and accessible for light installation.
- د اجزاوو پیژندنه: Familiarize yourself with the various LED components and wires provided in the kit.
- ځای په ځای کول: Follow the instruction guide to strategically place the LED lights within the Lego model. This often involves carefully routing wires between Lego bricks and attaching small LED components.
- پیوستون: Connect the individual LED light wires to the main circuit board or connectors as indicated in the instructions.
- د بریښنا پیوستون: Connect the entire lighting system to the battery box or a USB power source (less than 5V).
- ازموینه: Before securing all components, test the lights to ensure they are functioning correctly.
انځور: Example of LED light placement within the Lego model.
Image: Careful insertion of an LED light into a Lego brick.
Image: Proper routing of wires to integrate the lighting system seamlessly.
Image: Connecting the battery box to power the lights.
عملیاتي لارښوونې
Once the LIGHTAILING LED Lighting Kit is fully installed and connected to a power source (either the battery box with 3 AA batteries or a USB power source under 5V), the lights will illuminate. There are no additional controls for brightness or patterns; the lights are designed for continuous illumination when powered.
پاملرنه او ساتنه
ستاسو د رڼا کټ د اوږد عمر او غوره فعالیت ډاډمن کولو لپاره:
- پاکول: د LED برخې او تارونه په نرمۍ سره د نرم، وچ ټوکر سره پاک کړئ. د مایعاتو یا کثافاتو پاکوونکو کارولو څخه ډډه وکړئ.
- ذخیره کول: If storing the model for an extended period, disconnect the power source (remove batteries or unplug USB) to prevent battery drain or potential damage.
- سمبالول: Continue to handle the illuminated model with care to avoid dislodging or damaging the delicate wiring.
د ستونزو حل کول
If you encounter any issues with your LIGHTAILING LED Lighting Kit, please refer to the following common problems and solutions:
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| څراغونه نه خلاصیږي. | No power, incorrect connection, or faulty component. | Ensure batteries are correctly inserted and charged, or USB power is connected. Check all wire connections for proper seating. Verify the power source is functioning. |
| ځینې څراغونه تیاره یا ځلیدونکي دي. | د بیټرۍ ټیټ ځواک یا اړیکه پرې شوې. | Replace batteries with fresh ones or try a different USB power source. Inspect connections for any looseness. |
| څراغونه ډیر روښانه یا ډیر تیاره دي. | This kit does not offer adjustable brightness. | The kit is designed for a fixed brightness level. Ensure your power source is within the 5V limit. |
| Wires are visible or not neatly integrated. | د نصبولو پرمهال ناسمه لار. | Carefully re-route wires according to the instruction manual, utilizing gaps and spaces within the Lego model for concealment. |
د محصول مشخصات
| فیچر | تفصیل |
|---|---|
| برانډ | رڼا اچول |
| د ماډل شمیره | 21335 |
| سره مطابقت لري | Lego 21335 Motorized Lighthouse |
| د بریښنا سرچینه | 3 AA Batteries (not included) or USB Power (less than 5V) |
| د محصول ابعاد (بکس) | 6.5 x 4.72 x 1.57 انچه |
| د توکي وزن | 5.8 اونس |
| د جوړونکي وړاندیز شوی عمر | 6 کاله او پورته |
د پیرودونکي ملاتړ او تضمین
LIGHTAILING is committed to providing quality products and services. If you encounter any problems during the installation or operation of your LED lighting kit, or if you have any questions, please do not hesitate to contact our customer support team. While specific warranty details are not provided in this manual, LIGHTAILING aims to ensure customer satisfaction with their products.
For assistance, please refer to the contact information provided on the product packaging or the official LIGHTAILING webسایټ