پیژندنه
This manual provides essential information for the installation, operation, and maintenance of your Diyeeni 4G LTE Module Card, Model Diyeeni0gh1c5nb9y. This high-performance network card is designed to deliver fast and stable internet connectivity across various devices and network standards.
The module supports 5G NR, 4G LTE, and 3G WCDMA networks, offering download speeds up to 4.67Gbps and upload speeds up to 1.25Gbps on 5G NR networks. Equipped with 4x4 MIMO technology, it ensures improved signal coverage and enhanced transmission speeds. Additionally, it includes a GNSS modem for accurate navigation and positioning capabilities.
د بسته محتويات
- 1 x Diyeeni 5G NR Module Card
- 1 x سکرو
تنظیم او نصب کول
The Diyeeni 4G LTE Module Card is designed for plug-and-play functionality, simplifying the installation process. It is compatible with a variety of devices, including laptops, desktops, and tablets that feature an M.2 slot.
د فزیکي نصبولو مرحلې:
- خپل وسیله چمتو کړئ: Ensure your laptop, desktop, or tablet is powered off and disconnected from any power source. For laptops, remove the battery if applicable.
- د M.2 سلاټ ومومئ: Open your device's casing to access the internal components. Identify an available M.2 slot, typically labeled for WWAN (Wireless Wide Area Network) or similar. Consult your device's manual for exact location.
- Insert the Module Card: Gently align the Diyeeni 4G LTE Module Card with the M.2 slot. Insert the card at a slight angle (approximately 30 degrees) until the gold contacts are fully seated.
- د کارت خوندي کول: Push the card down towards the motherboard until it lies flat. Use the provided screw to secure the card in place at the end of the slot.
- Connect Antennas (Optional/If applicable): If your device supports external antennas for cellular connectivity, connect them to the appropriate connectors on the module card (e.g., ANT0, ANT1, ANT2, ANT3).
- بیا راټولول او فعالول: Close your device's casing, reconnect the battery (if removed), and power on the device.
Image: Close-up of the M.2 connector for proper alignment during installation.
Image: Antenna connectors on the module card for optional external antenna connections.
عملیاتي لارښوونې
Once the Diyeeni 4G LTE Module Card is physically installed, your operating system (such as Windows or Linux) should automatically detect the new hardware. Due to its plug-and-play design, manual driver installation is often not required. If prompted, allow the operating system to install necessary drivers.
Connecting to a Cellular Network:
- سیم کارت داخل کړئ: Ensure a compatible SIM card (not included) is inserted into the SIM card slot on your device, if available and connected to the module.
- د شبکې ترتیباتو ته لاسرسی: Navigate to your device's network settings. This is typically found in the 'Settings' or 'Control Panel' under 'Network & Internet' or 'Mobile Network'.
- Enable Mobile Broadband: Turn on the mobile broadband or cellular data option.
- شبکه غوره کړئ: Your device should automatically detect available cellular networks. Select your preferred network if multiple options appear.
- اړیکه ټینګول: The module will attempt to connect to the selected network. Once connected, you will have internet access.
Image: The module card supports various network standards and offers high-speed data transfer.
GNSS Functionality:
The integrated GNSS modem provides accurate navigation and positioning. This feature can be utilized by compatible applications and services on your device that require location data.
Image: 4x4 MIMO technology enhances signal coverage and transmission speeds.
ساتنه
The Diyeeni 4G LTE Module Card requires minimal maintenance. To ensure optimal performance and longevity:
- موټر چلوونکي تازه وساتئ: Periodically check for and install the latest drivers for your module card from your device manufacturer's website or the module manufacturer's support page.
- د مناسبې هوا ورکول ډاډمن کړئ: Make sure your device has adequate airflow to prevent overheating, which can affect the performance of internal components, including the network card.
- په احتیاط سره سمبالول: When handling the module card, avoid touching the gold contacts or sensitive components to prevent electrostatic discharge damage.
د ستونزو حل کول
If you encounter issues with your Diyeeni 4G LTE Module Card, refer to the following troubleshooting tips:
د شبکې اړیکه نشته:
- فزیکي نصب کول وګورئ: Ensure the module card is securely seated in the M.2 slot and the screw is tightened.
- د سیم کارت تایید: Confirm that a working SIM card with an active data plan is correctly inserted into your device's SIM slot.
- د ډرایور نصب کول: Check Device Manager (Windows) or equivalent (Linux) to ensure the module card drivers are installed correctly and there are no error symbols. Reinstall drivers if necessary.
- د شبکې ترتیبات: Verify that mobile broadband is enabled in your operating system's network settings.
- د انتن پیوستون: If using external antennas, ensure they are securely connected to the module card.
د معلوماتو ورو سرعت:
- د سیګنال ځواک: Check the cellular signal strength. Weak signals can lead to slower speeds. Try moving to an area with better reception.
- د شبکې ګنډل: Data speeds can be affected by network congestion, especially during peak hours.
- د موټر چلوونکي تازه معلومات: Ensure your module drivers are up to date.
- د وسیلې فعالیت: Other applications running on your device might be consuming bandwidth or system resources.
ماډل ونه موندل شو:
- Reseat Module: Power off your device, open the casing, and reseat the module card in its M.2 slot.
- د BIOS/UEFI ترتیبات: Some devices may require enabling the M.2 slot or WWAN functionality in the BIOS/UEFI settings.
- مطابقت: Ensure your device's M.2 slot is compatible with cellular modules (e.g., M.2 Key B or Key B+M).
مشخصات
| فیچر | تفصیل |
|---|---|
| د توکو ډول | 5G NR Module Card |
| مواد | چاپ شوی سرکټ بورډ |
| د انٹرفیس ډول | M.2 |
| د شبکې معیاري | 5G(NR): n1/2/3/5/7/8/20/25/28/30/38/40/41/48/66/71/77/78/79 4G(LTE FDD): B1/2/3/4/5/7/8/12/13/14/17/18/19/20/25/26/28/29/30/32/66/71 4G(LTE TDD): B34/38/39/40/41/42/43/46/48 3G(WCDMA): B1/2/4/5/8 |
| Data Rates (FR1 Sub 6 SA) | 4.67Gbps (DL) / 1.25Gbps (UL) |
| Data Rates (FR1 Sub 6 NSA) | 3.74Gbps (DL) / 835Mbps (UL) |
| Data Rates (LTE FDD) | 1.6Gbps (DL) / 211Mbps (UL) |
| Data Rates (LTE TDD) | 1.22Gbps (DL) / 90Mbps (UL) |
| Data Rates (DC HSPA+) | ۳۰۰ ایم بی پی ایس (ډی ایل) / ۱۰۰ ایم بی پی ایس (یو ایل) |
| Data Rates (HSPA/HSPA+) | ۳۰۰ ایم بی پی ایس (ډی ایل) / ۱۰۰ ایم بی پی ایس (یو ایل) |
| Data Rates (UMTS) | 384Kbps (DL) / 384Kbps (UL) |
| د MIMO ټیکنالوژي | ۴x۴ میمو |
| GNSS Modem | Included for navigation and positioning |
| د سیسټم ملاتړ | For Windows, For Linux |
| د تطبیق وړ وسایل | Laptops, Desktops, Tablets |
| د ماډل شمیره | Diyeeni0gh1c5nb9y |
تضمین او ملاتړ
For warranty information regarding your Diyeeni 4G LTE Module Card, please refer to the documentation provided at the time of purchase or contact your retailer. Warranty terms typically cover manufacturing defects for a specified period.
If you require technical assistance or have questions not covered in this manual, please contact the seller or Diyeeni customer support through their official channels. Keep your purchase receipt and product model number (Diyeeni0gh1c5nb9y) readily available when seeking support.