د اډیفایر MR3 سټوډیو مانیټر سپیکر کارونکي لارښود

1. پیژندنه

د پیرودلو لپاره مننهasing the Edifier MR3 Studio Monitor Speakers. This manual provides essential information for setting up, operating, and maintaining your speakers to ensure optimal performance and longevity. Please read this manual thoroughly before use and retain it for future reference.

2. کلیدي ځانګړتیاوې

• Accurate Sound Reproduction: Designed for precise audio detail and nuance, ideal for home studios, video editing, and daily listening.
• د فلیټ فریکونسۍ ځواب: Covers a wide range from 52 Hz to 40 kHz, delivering neutral and transparent sound. The dimple tweeter waveguide ensures extended high-frequency response and a wider listening area.
• د لوړ ریزولوشن آډیو: Equipped with Texas Instruments analog audio front-end and Class D audio amplifier, operating at 24 bit/96 kHz for perfect audio conversion and ampتړل
• د خونې اصلاح: Multiple room correction settings available via the rear knob and the 'Edifier ConneX' app, adapting to various room modes for an optimized listening experience.
• ځواکمن محصول: Features 3.5-inch mid-low drivers and 1-inch silk dome tweeters, delivering a total output of 18W*2 (RMS) and 92.5dB SPL (peak @ 1 meter), suitable for near-field listening and filling medium-sized rooms.
• څو اړخیز ارتباط: Includes TRS balanced input for low-noise signal transmission (ideal for audio interfaces/mixers), RCA, and AUX inputs for connecting multiple audio devices.
• Multi-point Bluetooth 5.4: Supports the latest Bluetooth 5.4 for faster, more stable connections, and allows simultaneous connection to two devices.
• وقف شوی اپلیکیشن کنټرول: The 'Edifier ConneX' app unlocks additional features and customization options.

3. د تنظیم کولو لارښود

3.1 ان باکس کول

په احتیاط سره ټولې برخې خلاصې کړئ او ډاډ ترلاسه کړئ چې هرڅه شتون لري:

• Edifier MR3 Speakers (1 pair)
• د بریښنا کیبل
• د سپیکر پیوستون کیبل
• 3.5mm-RCA Audio Cable
• 3.5mm-3.5mm آډیو کیبل
• د چټک پیل لارښود
• د خوندیتوب مهم معلومات

Image: Edifier MR3 speakers and included accessories, including power cable, speaker cable, 3.5mm-RCA cable, 3.5mm-3.5mm cable, quick start guide, and safety information.

3.2 د سپیکر ځای پرځای کول

د غږ کیفیت لپاره د سپیکر غوره ځای پرځای کول خورا مهم دي. لاندې په پام کې ونیسئ:

• Listening Triangle: Position the two speakers and your listening point to form an equilateral triangle (60 degrees).
• له دیوالونو څخه واټن: Ideally, place speakers at least 1.5 meters away from walls to prevent bass buildup.
• همغږي: Place speakers symmetrically to your listening position.
• Tweeter Height: Position tweeters at ear level (typically 1.2m to 1.4m).
• عمودی لوری: Always place speakers vertically (avoid horizontal placement).
• د کوټې صوتي: Use appropriate room acoustic treatment to reduce interference from direct and reflected sound.
• Standing Waves: Adjust speaker position to minimize the effect of room standing waves.

Image: Diagram illustrating optimal speaker placement, including equilateral triangle setup, distance from walls, tweeter height, and vertical orientation.

۸ پاور آن/بند

• د فعالولو لپاره: Press the volume knob on the front panel.
• د بریښنا بندولو لپاره: د حجم نوب د ۳ ثانیو لپاره فشار ورکړئ او ونیسئ.
• د بریښنا خوندي کولو حالت: The speakers will enter power-saving mode if no audio is played or no operation is performed for 15 minutes (Bluetooth device connected). If no Bluetooth device is connected and no operation for 15 minutes, the speakers will power off. This feature is enabled by default. To disable/re-enable, turn the volume to 0 and press the volume knob twice. The indicator will flash once for disabled, twice for enabled.

4. ارتباطات

4.1 وائرډ پیوستون

The MR3 speakers offer a variety of wired input options:

• د TRS متوازن ان پټ: Provides noise-free signal transmission, ideal for connecting to professional audio interfaces or mixing consoles.
• RCA ننوت: For connecting devices with RCA outputs, such as turntables or CD players.
• AUX داخلول: A versatile 3.5mm input for connecting various audio sources like computers, smartphones, or older audio equipment.

Image: Rear panel of the Edifier MR3 speaker, highlighting TRS balanced inputs, RCA unbalanced inputs, and speaker output terminals. Also shows the AUX input on the front.

4.2 د بلوتوث اتصال

The MR3 supports Bluetooth 5.4 with multi-point connectivity, allowing two devices to be connected simultaneously.

• د واحد وسیله پیوستون:
  1. Ensure no device is currently connected via Bluetooth.
  2. Press the Bluetooth function button on the rear panel. The indicator will flash rapidly, indicating pairing mode. If it doesn't enter pairing mode, press and hold the Bluetooth button for 1.5 seconds.
  3. On your device, search for 'EDIFIER MR3' in the Bluetooth device list and select it to connect. The indicator will glow steadily once connected.
• Multi-point Connection (Two Devices):
  1. Connect the first device as described above.
  2. Press and hold the Bluetooth function button for 1.5 seconds to enter pairing mode again. The indicator will flash rapidly.
  3. On your second device, search for 'EDIFIER MR3' and connect.
  4. To play audio from one device, pause playback on the other.
• Bluetooth Hidden Mode: If no device is connected for 3 minutes, the speaker will enter Bluetooth hidden mode. In this mode, new devices cannot discover the speaker, but previously paired devices can reconnect by selecting 'EDIFIER MR3' from their Bluetooth list. To exit hidden mode, press the Bluetooth function button.

Image: A close-up of a Bluetooth 5.4 chip on a circuit board, representing the advanced wireless connectivity of the Edifier MR3.

5. عملیاتي لارښوونې

5.1 Sound Mode Switching

Press the volume knob to cycle through the sound modes:

• سور شاخص: Monitor Mode (flat frequency response for critical listening)
• شنه شاخص: Music Mode (enhanced for general music enjoyment)
• White Indicator: Customize Mode (user-defined settings via the app)

5.2 Using the Edifier ConneX App

The 'Edifier ConneX' app provides advanced control and customization for your MR3 speakers.

• کښته کول: Scan the QR code in the Quick Start Guide or on the package, or search for 'Edifier ConneX' on the App Store or Google Play.
• نښلول: Connect your device to the speaker via Bluetooth.
• ځانګړتیاوې: The app allows you to adjust volume, switch sound effects, customize EQ, and access room correction settings.

Image: A smartphone screen showing the Edifier ConneX app, with options for sound effects, volume control, and other settings for the MR3 speakers.

5.3 Audio Tuning (Room Correction)

The 'Acoustic Tuning' interface in the app allows you to modify settings based on your room environment:

• Low Cutoff: Reduces low frequencies (20-100 Hz) based on room size and shape. Attenuation levels can be set at 6, 12, 18, or 24 dB/octave.
• د غږ فضا: Adjusts the bass boost based on speaker placement (e.g., 0dB for center, -2dB for wall side, -4dB for corner).
• د ډیسټاپ کنټرول: Compensates for sound reflections when speakers are placed on a desktop. This feature helps mitigate the effect of increased decibel levels at certain frequencies due to desktop placement.

Image: The Edifier ConneX app's 'Acoustic Tuning' screen, displaying controls for Low Cutoff, Acoustic Space, and Desktop Control, with corresponding frequency response graphs.

You can also adjust high and low-frequency gains using the physical knobs on the rear panel:

• 'High' Knob: Adjusts frequencies above 10kHz by +/- 6dB.
• 'Low' Knob: Adjusts frequencies around 125Hz by +/- 6dB.

5.4 د هیډفون محصول

To use headphones, connect them to the 3.5mm headphone jack on the front panel. When headphones are connected, the speaker output will be muted. The headphone volume can be adjusted using the speaker's volume knob.

6. ستونزه حل کول

If you encounter any issues with your Edifier MR3 speakers, please refer to the following common solutions:

• ځواک نشته: Ensure the power cable is securely connected and the speaker is turned on (press the volume knob). Check the power outlet.
• غږ نشته: Verify that the correct input source is selected. Check all audio cable connections. Ensure the volume is not muted or too low. If using Bluetooth, ensure the device is paired and connected.
• تحریف شوی غږ: Reduce the volume of the source device and the speaker. Check for loose connections. Ensure the audio source is not overdriven.
• د بلوتوټ جوړه کولو مسلې: Ensure the speaker is in pairing mode (flashing indicator). Turn off and on your device's Bluetooth. Try forgetting the speaker from your device's Bluetooth list and re-pairing.
• د اپلیکیشن ارتباط مسلې: Ensure Bluetooth is enabled and the speaker is connected to your device. Restart the app and try again.

If the problem persists, please contact Edifier customer support for assistance.

7. مشخصات

8. د فابریکې ری سیٹ

If needed, you can reset your speakers to their factory default settings via the 'Edifier ConneX' app:

1. Open the 'Edifier ConneX' app.
2. Navigate to 'My Device' and select 'Initialize'.
3. د بیا تنظیم کولو عمل تایید کړئ.

۹. د محصول ویډیوګانې

10. تضمین او ملاتړ

Edifier products come with a limited warranty. Please refer to the 'Important Safety Information' document included in your package for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or service inquiries, please visit the official Edifier webسایټ ته مراجعه وکړئ یا خپل سیمه ایز توزیع کونکي سره اړیکه ونیسئ.