Globo Lighting BOSTON Outdoor Pedestal Light

1. پیژندنه

Thank you for choosing the Globo Lighting BOSTON Outdoor Pedestal Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Image 1.1: The BOSTON outdoor pedestal light providing illumination along a pathway.

2. د خوندیتوب لارښوونې

• بریښنایی خوندیتوب: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Always disconnect power at the main circuit breaker before installation, maintenance, or bulb replacement.
• بهر استعمال: This fixture is designed for outdoor use. Ensure all connections are waterproof and sealed appropriately to prevent water ingress.
• د بلب ډول: Use only E27 bulbs with the specified wattage. د اعظمي واټ څخه ډیر مه کوئtage په فکسچر کې اشاره شوې.
• سمبالول: فکسچر په احتیاط سره سمبال کړئ. د غورځولو یا قوي ټکانونو سره مخ کیدو څخه ډډه وکړئ.
• پاکول: د کثافاتو پاکوونکي یا محلولونه مه کاروئ. د نرم، d سره پاک کړئamp ټوکر
• تودوخه: بلب ته اجازه ورکړئ چې په بشپړه توګه سړه شي مخکې لدې چې د هغې د بدلولو هڅه وکړئ.

3. د بسته محتويات

Please check that all components are present and undamaged before beginning installation:

• 1x BOSTON Outdoor Pedestal Light Fixture (Model 105701)
• 1x د نصبولو اساس
• 1x Set of Mounting Hardware (screws, anchors)
• 1x د کارونکي لارښود

Note: E27 bulb is not typically included and must be purchased separately.

4. مشخصات

5. ترتیب او نصب کول

مهم: د نصبولو پیل کولو دمخه ډاډ ترلاسه کړئ چې د بریښنا اصلي رسولو په سرکټ بریکر کې بند دی.

1. ځای غوره کړئ: Select a suitable outdoor location for the pedestal light, ensuring it is on a stable, level surface and has access to the necessary electrical wiring.
2. د تارونو چمتو کول: If not already present, run appropriate outdoor-rated electrical cable to the installation point. Consult a qualified electrician for this step.
3. بنسټ ایښودل: Position the mounting base on the desired surface. Mark the drilling points through the holes in the base. Drill pilot holes and secure the base using the provided mounting hardware (screws and anchors). Ensure the base is firmly attached.
4. د بریښنا تارونه وصل کړئ: Carefully connect the electrical wires from your power supply to the terminals inside the fixture. Follow the standard wiring color codes (e.g., Live, Neutral, Earth). Ensure all connections are secure and properly insulated.
5. بلب نصب کړئ: Insert a suitable E27 bulb (not included) into the lamp لرونکی ډیر مه کوئ.
6. خوندي فکسچر: Attach the main body of the pedestal light to the mounted base, ensuring it is securely fastened and sealed against moisture.
7. د بریښنا بیرته راګرځول: کله چې نصب بشپړ شي او ټولې اړیکې خوندي شي، په اصلي سرکټ بریکر کې بریښنا بیرته راوباسئ.

Image 5.1: The pedestal light installed on a patio, demonstrating a typical mounting scenario.

6. عملیاتي لارښوونې

The BOSTON Pedestal Light features an integrated motion sensor for automatic operation.

• پاور آن: Once installed and power is restored, the light will enter a warm-up period (typically a few seconds) before the motion sensor becomes active.
• د حرکت سینسر: The integrated motion sensor detects movement within its detection range. When motion is detected, the light will illuminate.
• اتومات بندول: After a period of no detected motion, the light will automatically turn off. The duration of illumination is typically pre-set or adjustable via controls on the sensor (if available). Refer to the sensor's specific markings for adjustment options.
• د ورځې / شپې سینسر: The motion sensor also includes a photocell that prevents the light from activating during daylight hours, conserving energy. The light will only activate due to motion when ambient light levels are low enough.

Image 6.1: Detail of the motion sensor on the pedestal light, highlighting its detection area.

Image 6.2: The pedestal light operating at night, with the motion sensor detecting movement.

7. ساتنه

• پاکول: په منظمه توګه فکسچر د نرم، d سره پاک کړئamp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive materials, as these can damage the finish or plastic components.
• د بلب بدلول:
  1. Ensure the power supply to the fixture is turned off at the circuit breaker.
  2. زوړ بلب ته اجازه ورکړئ چې په بشپړه توګه سړه شي مخکې لدې چې لمس یې کړئ.
  3. Carefully unscrew the top cover or access panel to reach the E27 bulb.
  4. Unscrew the old bulb and replace it with a new E27 bulb of the correct wattage.
  5. Securely reattach the cover or access panel, ensuring a watertight seal.
  6. بریښنا بیرته راګرځول.
• معاینه: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly to ensure continued safe operation.

8. ستونزه حل کول

If you experience persistent issues not covered here, please contact a qualified electrician or the product supplier.

9. تضمین او ملاتړ

This product is covered by the standard warranty provided by the manufacturer. Please retain your proof of purchase for any warranty claims. For technical support or further assistance, please contact your retailer or the Globo Lighting customer service department.

Contact information can typically be found on the product packaging or the manufacturer's official webسایټ