پیژندنه
This manual provides detailed instructions for the installation, operation, and maintenance of your Stemedu BLS-HV70MG 70KG Brushless Digital RC Servo. This high-performance servo is designed for 1:8 and 1:10 scale RC cars, offering high torque, speed, and durability. It features a brushless motor, all-metal gears, and an IP67 waterproof rating, ensuring reliable operation in various conditions.
د محصول ځانګړتیاوې
- 70KG Brushless Servo: لوړ عملیاتي حجمtage له 4.8V څخه تر 8.4V DC پورې.
- لوړ سرعت: No-load speed of 0.12sec/60° at 8.4V.
- لوړ تورک: Stall torque of 71 Kg-cm at 8.4V.
- د پنروک فعالیت: IP67 rated for reliable use in wet conditions.
- ټول فلزي ساختمان: Full aluminum case, stainless steel metal gears for precision, reduced noise, and high operating accuracy.
- د کنټرول زاویه: Controllable angle range from 0 to 180 degrees.
په بکس کې څه دي
په بسته کې لاندې برخې شاملې دي:
- 1 x Stemedu BLS-HV70MG 70KG Brushless Digital RC Servo
- Multiple plastic servo arms (various shapes)
- 1 x 25T metal servo horn
- Mounting screws and brass inserts
Image: The BLS-HV70MG servo shown with its complete set of accessories, including various plastic servo arms, a red metal 25T servo horn, mounting screws, and brass inserts.
د تنظیم کولو لارښوونې
- Mounting the Servo: Securely mount the servo into your RC vehicle's servo tray using the provided screws and brass inserts. Ensure the servo is firmly seated to prevent movement during operation.
- Connecting to Receiver/BEC: Connect the servo's 3-pin connector to the appropriate channel on your RC receiver. If using a separate Battery Eliminator Circuit (BEC), ensure it is properly connected and configured to supply the recommended voltage range (4.8V-8.4V) to the servo.
- Attaching Servo Horn: With the RC system powered on and the servo centered (usually by turning on the transmitter and receiver first), attach the desired servo horn to the servo output shaft. Ensure the horn is aligned correctly for your application. The included 25T metal servo horn is recommended for high-stress applications.
- ابتدايي اندازه کول: Before full operation, perform a basic calibration to ensure the servo responds correctly to your transmitter inputs. Check for full range of motion and proper centering.
انځور: یو مفصل view of the Stemedu BLS-HV70MG servo, showing its compact design and wiring for connection.
عملیاتي لارښوونې
The BLS-HV70MG servo operates with a control angle of 180 degrees, responding to standard PWM signals. The pulse width range for control is typically from 500 to 2500 microseconds, with 1500 microseconds representing the neutral position.
- والیtagد لړيو: This servo is designed for high voltage (HV) operation, accepting inputs from 4.8V to 8.4V. Operating within this range ensures optimal performance and longevity.
- Speed and Torque: The servo's speed and torque vary with the input voltage لوړ والیtages (e.g., 8.4V) will result in faster speeds (0.12sec/60°) and higher torque (71 Kg-cm).
- کنټرول: Use your RC transmitter to send control signals to the servo. Adjust the trim and sub-trim settings on your transmitter for precise centering and endpoint adjustments.
Image: A visual representation of the servo's 180-degree control angle, indicating the pulse width modulation (PWM) values corresponding to different positions.
Video: An official product video demonstrating the features and performance of the Stemedu 70KG Brushless Servo, including its waterproof capabilities and high-speed operation.
ساتنه
Proper maintenance ensures the longevity and optimal performance of your servo.
- د اوبو مخنیوی: The servo has an IP67 waterproof rating. While it can withstand splashes and temporary immersion, avoid prolonged submersion or high-pressure water jets. After exposure to water, allow the servo to dry completely before storage.
- د ګیر تفتیش: Periodically inspect the metal gears for any signs of wear, damage, or debris. Clean any accumulated dirt or grime.
- پاکول: Use a soft, dry cloth to clean the exterior of the servo. Avoid using harsh chemicals or solvents.
- ذخیره کول: Store the servo in a dry, cool place away from direct sunlight and extreme temperatures.
Image: The BLS-HV70MG servo is shown amidst splashing water, illustrating its IP67 waterproof design, which protects it from dust and water ingress.
د ستونزو حل کول
- سروو ځواب نه ورکوي:
- Check all connections between the servo, receiver, and power source.
- Ensure the receiver and transmitter are properly bound and powered on.
- د بریښنا رسولو حجم تایید کړئtage is within the servo's operating range (4.8V-8.4V).
- Inconsistent Centering:
- Adjust the sub-trim on your transmitter.
- Check for any mechanical binding or obstruction in the linkage.
- Ensure the servo horn is securely attached and not stripped.
- Excessive Noise or Grinding:
- Inspect the gears for damage or foreign objects.
- Ensure the servo is not under excessive load or binding.
- ډیر ګرمول:
- Reduce the load on the servo if possible.
- Ensure adequate ventilation around the servo.
- د ننوتلو حجم تایید کړئtage ډیر لوړ ندی.
مشخصات
| توکي | مشخصات |
|---|---|
| د قوماندې سیګنال | Pulse Width Modification (PWM) |
| Ampژوندی ډول | ډیجیټل کنټرولر |
| د نبض پراخوالی سلسله | 500-2500 µsec |
| غیر جانبدار موقعیت | 1500 µsec |
| Running Degree | 180±3° (when 500-2500 µsec) |
| Dead Band Width | 3 µsec |
| د څرخولو لار | Counterclockwise (when 1000-2000 µsec) |
| د عملیاتو حجمtage | 4.8V 8.4V |
| No-load Speed (4.8V) | 0.21 ثانیې/60° |
| No-load Speed (6.0V) | 0.17 ثانیې/60° |
| No-load Speed (7.4V) | 0.14 ثانیې/60° |
| No-load Speed (8.4V) | 0.12 ثانیې/60° |
| Running Current (4.8V-8.4V) | 500mA-1200mA |
| Peak Stall Torque (4.8V) | 58 kg-cm |
| Peak Stall Torque (6.0V) | 62 kg-cm |
| Peak Stall Torque (7.4V) | 68 kg-cm |
| Peak Stall Torque (8.4V) | 71 kg-cm |
| Stall Current (4.8V-8.4V) | 8000mA-13000mA |
| د محصول ابعاد | 1.57 x 0.79 x 1.57 انچه (40 x 20 x 40 mm) |
| د توکي وزن | 3.2 اونس (92.2 ګرامه) |
| د پنروک درجه | IP67 |
Image: A table presenting the comprehensive specifications of the BLS-HV70MG servo, detailing its performance characteristics under different voltage شرایط.
Image: A technical diagram illustrating the exact dimensions of the BLS-HV70MG servo in millimeters, useful for fitment and installation.
Image: The BLS-HV70MG servo on a digital scale, showing its weight of 92.2 grams, indicating its robust yet lightweight construction.
تضمین او ملاتړ
Stemedu products are manufactured to high-quality standards. For any issues or questions regarding your BLS-HV70MG servo, please refer to the seller's return policy or contact Stemedu customer support through the platform where the product was purchased. Please retain your proof of purchase for warranty claims.