SYNCO XTalk XPro2 2.4GHz Wireless Intercom Headset System

1. پیژندنه

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your SYNCO XTalk XPro2 2.4GHz Wireless Intercom Headset System. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Figure 1: SYNCO XTalk XPro2 Headset System and Accessories

2. محصول ختم شوview

The SYNCO XTalk XPro2 is a full-duplex wireless intercom headset system designed for professional team communication. Key features include:

• Enhanced Signal Reception: External antennas provide a reliable 500m (1640ft) connection range.
• پرمختللي شور کمول: Features 2.0 AEC algorithm (150Hz to 7KHz) for clear voice recognition in noisy environments.
• Flexible Team Communication: Supports up to 13-unit connections with group expansion technology.
• د ودې حالت: Enhances signal strength for stable communication through obstacles.
• غالب حالت: One-button remote muting function for the Master headset.
• د بیټرۍ اوږد ژوند: Over 24 hours of use with rechargeable and replaceable batteries.
• د ریښتیني وخت څارنه: 3.5mm monitoring jack for simultaneous communication and device audio monitoring.

Figure 2: Enhanced Signal Reception

Figure 3: Advanced AEC Noise Reduction

3. ترتیب کول

3.1 Manual Pairing

Follow these steps to manually pair your headsets:

1. په ټولو هیډ سیټونو کې بریښنا.
2. Set one headset as the Master and the others as Level 1.
3. Within 1 minute, long press all 'A' buttons. Release after the first beep. You will hear "Pairing Succeed".
4. Restart all headsets.

3.2 Using SYNCO EasyGo Software

For quick firmware upgrades, voice pack installations, and headset pairing, use the SYNCO EasyGo software. Refer to the user guide for software download and usage instructions from the SYNCO official site.

Figure 4: SYNCO EasyGo Software Interface

4. عملیاتي لارښوونې

4.1 د حجم ترتیبات

Short press the volume '+' or '-' buttons on the headset to adjust the listening volume.

4.2 Mute/Unmute Microphone

To mute or unmute the microphone, rotate the boom arm up or down. Rotating it up mutes the microphone, and rotating it down unmutes it.

۴.۴ د شور لغوه کول

Short press button 'B' to toggle noise cancellation on or off. You will hear a beep to confirm the change.

4.4 Dominant Mode

Press and hold button 'B' to enter Dominant Mode. This mode allows the Master headset to mute all remote headsets instantly. Release the button to exit Dominant Mode.

4.5 د بوسټ حالت

Long press the volume '-' button to hear a "beep", then release to switch between Mode 1, Mode 2, and Mode 3. Mode 2 is the default. Boost Mode enhances signal strength for stable communication, especially through obstacles.

۶.۱ په ریښتیني وخت کې څارنه

Connect the headset to a device (e.g., camera, recorder) via the 3.5mm TRS port for real-time audio monitoring. This port is for monitoring only and does not output audio.

Figure 5: Real-Time Monitoring Setup

5. شاخصونه

The LED indicator on the microphone boom arm provides status information:

• شنه رڼا ثابته: جوړه کول په بریالیتوب سره
• Green Light Flashing Slow: نښلول شوی نه دی
• Green/Yellow Lights Alternating: د شور لغوه کول بند دي
• Red Light Flashing Slow: ټیټ بیټرۍ
• سور څراغ ثابت: چارج کول

6. ساتنه

To ensure the longevity and optimal performance of your SYNCO XTalk XPro2 headset system, follow these maintenance guidelines:

• پاکول: د هیډسیټ پاکولو لپاره نرم، وچ ټوکر وکاروئ. د سختو کیمیاوي موادو یا کثافاتو موادو کارولو څخه ډډه وکړئ.
• ذخیره کول: هیډسیټ په یخ او وچ ځای کې د مستقیم لمر وړانګو او سختې تودوخې څخه لرې وساتئ.
• د بیټرۍ پاملرنه: The system uses rechargeable and replaceable Lithium-Ion batteries. Ensure batteries are fully charged before extended use and stored properly if not used for long periods.
• د مایکروفون ساتنه: Keep the microphone foam cover clean and replace if damaged to maintain audio quality.

Figure 6: 24-Hour Battery Life

7. ستونزه حل کول

If you encounter issues with your SYNCO XTalk XPro2 system, refer to the following common problems and solutions:

• No Audio/Intermittent Connection:
  • Ensure all headsets are powered on and fully charged.
  • Verify proper pairing between Master and Level 1 headsets (refer to Section 3.1).
  • Check the operating range; move closer to the Master headset.
  • Restart all headsets.
• د غږ خراب کیفیت / ډیر شور:
  • Ensure Noise Cancellation is activated (refer to Section 4.3).
  • Check microphone position and ensure it is not obstructed.
  • Verify that the microphone boom arm is fully down for unmuted operation.
• هیډسیټ چارج نه کوي:
  • ډاډ ترلاسه کړئ چې د چارج کولو کیبل په خوندي ډول د هیډسیټ او بریښنا سرچینې دواړو سره وصل دی.
  • د فعالیت لپاره د بریښنا سرچینه وګورئ.
  • Verify the charging indicator (Red Light Steady) as per Section 5.

8. مشخصات

9. تضمین او ملاتړ

For warranty information, technical support, or service inquiries, please refer to the official SYNCO webسایټ ته مراجعه وکړئ یا مستقیم د دوی د پیرودونکو خدماتو سره اړیکه ونیسئ. د تضمین ادعاوو لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.