د رن کیم تومب 2 FPV مینی ایکشن کیمرې کارونکي لارښود

1. پیژندنه

The RunCam Thumb 2 is an ultra-lightweight FPV mini action camera designed for high-quality video recording in dynamic environments. It features 4K60FPS video capture, Gyroflow stabilization, and remote-control capabilities, making it suitable for FPV drones, RC airplanes, and RC cars. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your RunCam Thumb 2 camera.

Image: RunCam Thumb 2 FPV Mini Action Camera. This image shows the compact, black camera with its lens facing forward.

2. محصول ختم شوview

Familiarize yourself with the components and features of your RunCam Thumb 2 camera.

Image: Diagram showing the RunCam Thumb 2 camera with labeled parts including Lens cover, MIC, Button (power/shutter), Indicator Light (Red/Green), Micro SD Card Slot, Ventilation Holes, and 1.25mm 3P (5V/GND/PWM) port.

• د لینز پوښ: د کیمرې لینز ساتي.
• MIC: د آډیو ثبتولو لپاره مدغم مایکروفون.
• تڼۍ: Used for power on/off and shutter control.
• د رڼا شاخص: د کیمرې حالت (سور/شنه) ښیي.
• د مایکرو SD کارت سلاټ: د حافظې کارت داخلولو لپاره.
• د وینټیلیشن سوراخ: Designed for heat dissipation.
• 1.25mm 3P Port (5V/GND/PWM): For external power supply and remote control signals.

Image: Two RunCam Thumb 2 cameras, one displaying a red indicator light and the other a green indicator light, highlighting their compact design.

3. ترتیب کول

3.1 د بریښنا رسول

The RunCam Thumb 2 does not include a built-in battery and requires an external 5V DC power supply. You can power the camera using a power bank or by connecting it to your flight controller's Battery Eliminator Circuit (BEC).

• بریښنا بانک: Connect a 5V power bank to the camera's Type-C port.
• Flight Controller (BEC): Connect the camera to your flight controller or use a balanced cable from your main battery. Ensure the output is a stable 5V.

Image: Illustration of the RunCam Thumb 2 connected to a power bank via a USB-C cable for power.

Image: Illustration of the RunCam Thumb 2 connected to a BEC (Battery Eliminator Circuit) for power, showing wire connections.

3.2 د مایکرو ایس ډی کارت نصب کول

Insert a Micro SD card (not included) into the Micro SD Card Slot. Ensure the card is inserted correctly with the contacts facing the camera body. The camera supports Micro SD cards up to 128GB.

3.3 پورته کول

Use the provided 3D printed camera mount to securely attach the RunCam Thumb 2 to your FPV drone, RC airplane, or RC car. Ensure the camera is mounted in a position that provides a clear field of view and is protected from potential impacts.

4. عملیاتي لارښوونې

4.1 بنسټیز عملیات

• پاور آن/بند: Press and hold the button to power the camera on or off.
• ثبت کول پیل / بندول: Briefly press the button to start or stop video recording. The indicator light will change to reflect the recording status.

4.2 ویډیو ثبتول

The RunCam Thumb 2 supports ultra-clear 4K60FPS video recording. For optimal performance and to prevent overheating, especially during prolonged static recording, consider reducing the resolution for long-duration recordings. In-flight recording is generally not subject to the same thermal limitations.

Image: A RunCam Thumb 2 camera overlayed on a scenic coastal view, illustrating its 4K 60fps and 2.7K 60fps recording capabilities. A note indicates that recording at 4K@60fps may last about 10 minutes before the device cools down or shuts off due to protection.

۵.۴ د ګیروفلو ثبات

With its built-in gyroscope, the camera generates Gyro data files, enabling smooth and stabilized video output using Gyroflow software. This feature significantly enhances video quality by reducing unwanted shakes and vibrations.

4.4 Remote Control Recording

The camera supports remote-control HD recording, allowing you to start and stop recording via your flight controller. This integration provides seamless operation during flight.

Image: An FPV drone equipped with a RunCam Thumb 2 camera flying through a natural rock archway over water, demonstrating remote recording capabilities. A note warns that proximity to GPS may affect signal reception.

د UART له لارې ریموټ کنټرول (وړاندیز شوی)

For remote control, connect the camera to your flight controller via UART. For example, with a Speedy Bee-F7 flight controller:

• Solder the power wire of the Type-C control cable to the 5V pad on the flight controller.
• Solder the GND wire to the GND pad.
• Solder the Tx wire to an R3 pad and the Rx wire to a T3 pad (or equivalent UART pins on your specific flight controller).

Image: Diagram illustrating the wiring connections for remote control of the RunCam Thumb 2 via UART to a flight controller, showing 5V, GND, Tx, and Rx connections.

4.5 Camera Settings via RunCam App (QR Code)

Adjust camera settings such as resolution, saturation, exposure, and recording mode using the RunCam App. The app generates a QR code that the camera scans to apply the settings.

1. Go to the RunCam App and select "Thumb 2".
2. Configure your desired settings and generate a QR code within the app.
3. Power on the camera. Double-press the button to switch to scanning mode; the indicator light will turn solid green.
4. Use the camera to scan the generated QR code from the RunCam App. The light will turn solid red upon successful scanning. Optimal scanning distance is approximately 25mm.

Image: Screenshot of the RunCam App interface on a smartphone, showing options for video and general settings, including recording mode, video quality, resolution, and stabilization. This demonstrates personalized customization.

Image: Illustration showing the RunCam Thumb 2 camera scanning a QR code displayed on a screen, with text explaining the process of configuring settings via the RunCam App.

5. ساتنه

• د لینز ساتنه: The camera features a replaceable protective cover to effectively shield the lens from damage. Replace the cover if it becomes scratched or damaged.
• د ND فلټر: The included ND filter set is replaceable. Use ND filters to improve video quality in bright conditions and reduce the "jello" effect.
• پاکول: Gently clean the lens and camera body with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• ذخیره کول: کیمره په یخ او وچ ځای کې وساتئ، د مستقیم لمر وړانګو او سختو تودوخې څخه لرې وساتئ کله چې کارول نه وي.

6. ستونزه حل کول

7. مشخصات

8. تضمین او ملاتړ

8.1 د تضمین معلومات

The RunCam Thumb 2 FPV Mini Action Camera comes with a limited warranty. For detailed information regarding warranty terms, duration, and claims, please refer to the official RunCam webسایټ یا د خپل پیرود ځای سره اړیکه ونیسئ.

8.2 د پیرودونکي ملاتړ

For technical assistance, troubleshooting, or product inquiries, please visit the official RunCam store or support channels. You can find more information at the په ایمیزون کې د رن کیم پلورنځی.