1. پیژندنه
Thank you for choosing the Torkase PAR38 Motion Sensor LED Flood Light Bulb. This manual provides essential information for the safe and effective installation, operation, and maintenance of your new light bulbs. Please read these instructions thoroughly before use and retain them for future reference.
Image 1.1: Torkase PAR38 Motion Sensor LED Flood Light Bulb, showing its design and E26 base.
2. د محصول ب Featuresې
- PIR Infrared Motion Sensor: Automatically activates the light when movement is detected within 8-16 feet in dark conditions. The light turns off approximately 30-40 seconds after motion ceases.
- له سهار څخه تر سهاره پورې سینسر: Built-in photocell sensor ensures the bulb only operates in low light conditions (below 15 lux). It remains off during the daytime (above 40 lux) even if motion is detected, optimizing energy efficiency.
- High Brightness & Energy Saving: This 20W LED bulb provides 2000 lumens of 5000K daylight illumination, equivalent to a 150W traditional bulb, saving up to 85% on energy consumption.
- څو اړخیز غوښتنلیک: Suitable for both indoor and outdoor use, ideal for porches, garages, driveways, patios, and other areas requiring bright, motion-activated lighting.
Image 2.1: Diagram illustrating the internal components, including the built-in photocell sensor and PIR motion sensor, highlighting the 30ft PIR detection distance.
3. مشخصات
Image 3.1: Specific dimensions of the Torkase PAR38 LED bulb, showing its width, height, and E26 base.
| صفت | ارزښت |
|---|---|
| برانډ | تورکیس |
| د رڼا ډول | LED |
| واټtage | 20 واټ |
| د بلب شکل اندازه | PAR38 |
| د بلب اساس | E26 |
| رڼا رنګ | ۵۰۰۰ زره د ورځې رڼا (سړه سپینه) |
| والیtage | 100-240 وولټونه |
| روښانتیا | 2000 Lumens |
| د کور دننه / بهر کارول | دننه، بهر |
| ځانګړي ځانګړتیاوې | PIR Motion Sensor, Dusk to Dawn Sensor |
| dimmable | نه (کم نه کېدونکی) |
| د محصول ابعاد | ۱۷" څراغ x ۱۷" ح |
| د توکي وزن | 14.9 اونس |
| د ژوند موده | 30,000 ساعته |
| شاملې برخې | 2 x PAR38 Flood LED Light Bulbs |
4. د خوندیتوب معلومات
د ټپي کیدو یا زیان څخه د مخنیوي لپاره مهرباني وکړئ لاندې خوندیتوب احتیاطي تدابیر په پام کې ونیسئ:
- Always turn off the power supply at the circuit breaker before installing or replacing the bulb.
- Do not install the bulb in a fully enclosed fixture or recessed fixture, as this can trap heat and interfere with the motion sensor's operation. The motion sensor part must be exposed.
- Ensure the bulb is installed in a suitable fixture that can support its weight and dimensions.
- Do not use with dimmers. This bulb is not dimmable.
- Avoid installing in wet and high-temperature environments that exceed the bulb's operating specifications.
- بلب مه جلا کوئ یا یې مه بدلوئ.
5. ترتیب او نصب کول
د سم نصبولو لپاره دا ګامونه تعقیب کړئ:
- بندول: Before installation, ensure the power to the light fixture is turned off at the main circuit breaker to prevent electrical shock.
- زوړ بلب لرې کړئ: په احتیاط سره موجوده بلب خلاص کړئ او له فکسچر څخه یې لرې کړئ.
- نوی بلب نصب کړئ: Screw the Torkase PAR38 Motion Sensor LED Flood Light Bulb into the E26 base socket until it is snug. Do not overtighten.
- موقعیت: Ensure the motion sensor on the bulb is facing the desired detection area. The bulb should be mounted 8-15 feet above the ground for optimal performance. The sensor part must not be covered by the fixture.
- پاور آن: په سرکټ بریکر کې بریښنا بحال کړئ.
Image 5.1: Visual guide for installation, demonstrating suitable open fixtures and unsuitable enclosed fixtures for the motion sensor bulb.
6. عملیاتي لارښوونې
The Torkase PAR38 Motion Sensor LED Flood Light Bulb is designed for automatic operation:
- ابتدايي فعالول: After installation and power restoration, the bulb may cycle on and off a few times as it calibrates its sensors.
- اتوماتیک عملیات: Keep the light switch in the 'ON' position. The bulb will automatically turn on when motion is detected in dark conditions (below 15 lux) and turn off after approximately 30-40 seconds of no further motion.
- Daytime Mode: During daylight hours (above 40 lux), the bulb will remain off, regardless of motion, due to its integrated dusk-to-dawn sensor.
Image 6.1: Illustration of the motion sensor functionality, showing the bulb remaining off during the day and activating for 40 seconds when motion is detected at night.
Video 6.1: Official Torkase video demonstrating the motion sensor light bulb's activation and deactivation in an outdoor setting.
7. ساتنه
These LED bulbs require minimal maintenance:
- پاکول: Ensure the power is off before cleaning. Wipe the bulb and sensor area with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- بدلول: When the bulb reaches the end of its lifespan, turn off the power, allow the bulb to cool, and replace it with a new Torkase PAR38 Motion Sensor LED Flood Light Bulb.
8. ستونزه حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| بلب نه روښانه کېږي. | No power, switch off, ambient light too high, sensor obstructed. | Check power supply. Ensure light switch is ON. Verify ambient light is below 15 lux. Ensure sensor is not covered. |
| بلب په دوامداره توګه روښانه پاتې کیږي. | Constant motion detected, sensor malfunction, ambient light too low. | Ensure no continuous motion in detection area. Check for sensor obstruction. Verify ambient light is above 15 lux during the day. |
| Motion sensor not sensitive enough. | Incorrect installation angle/height, sensor obstructed. | Adjust the angle and height of the bulb installation to direct the sensor towards the desired detection area. Ensure the sensor is not obstructed. |
| بلب فلیکر. | Loose connection, incompatible fixture. | Turn off power, tighten bulb. Ensure fixture is suitable for LED bulbs. |
9. تضمین او ملاتړ
Torkase stands behind its products with a 3 کلن تضمین.
If you require assistance, have questions, or encounter any issues with your Torkase PAR38 Motion Sensor LED Flood Light Bulbs, please contact us through your Amazon order. Warranty services are only available for orders placed directly from the Torkase store.