1. محصول ختم شوview
The Partuto Nano Ceramic Car Window Tint Film is designed to enhance your vehicle's comfort and privacy. This high-performance film features a 50% Visible Light Transmission (VLT), 60% Infrared Rejection (IRR), and 99% Ultraviolet Rejection (UVR). Made from durable 2mil PET material, it comes in a green tint and measures 5ft x 24inch, providing effective heat insulation and sun protection.
Image 1: A roll of the Partuto Nano Ceramic Car Window Tint Film, showcasing its green hue and reflective surface.
ویډیو ۱: د محصول لنډیزview demonstrating the Nano Ceramic Window Tint Film's features, including its heat insulation and UV blocking capabilities.
۲. مهمې ځانګړتیاوې او ګټې
- Superior UV Protection: Blocks 99% of harmful UV rays, preventing interior fading and protecting occupants from sun exposure.
- Effective Heat Insulation: Reduces heat buildup inside the vehicle, contributing to a cooler interior and potentially lower air conditioning usage.
- د محرمیت ښه والی: The 50% VLT provides a degree of privacy while maintaining visibility from inside.
- Anti-Glare Properties: Helps reduce glare from sunlight and headlights, improving driving visibility and safety.
- دوامدار ساختمان: Made from PET material with a scratch-resistant coating for long-lasting performance.
Image 2: Illustration of various Visible Light Transmission (VLT) levels on car windows, demonstrating the visual effect of different tint percentages.
Image 3: A visual representation highlighting the film's key performance metrics: 50% VLT, 60% IRR, and 99% UVR.
Image 4: Close-up of the film emphasizing its benefits: UV Shielding, Heat Resistance, and Enhanced Privacy.
Image 5: A demonstration of the film's material, highlighting its ability to provide ultraviolet and infrared protection.
Video 2: A detailed demonstration of Nano Ceramic Window Tint specifications, including measurements of VLT, UVR, IRR, and BTU heat transmission for various tint levels.
3. مشخصات
| صفت | ارزښت |
|---|---|
| رنګ | شین |
| مواد | PET |
| Size (L*W) | 150 x 60cm / 5ft x 24inch |
| د لید وړ رڼا لیږد (VLT) | 50% |
| Infrared Rejection (IRR) | 60% |
| Ultraviolet Rejection (UVR) | 99% |
| موټی | 2 ملیونه |
| د توکي وزن | 6.4 اونس |
| د کڅوړې ابعاد | 25.2 x 2.36 x 1.57 انچه |
| د توکي ماډل شمیره | tu000424a250428 |
| موقف | بهر |
Image 6: Visual representation of the film's dimensions: 150cm (5ft) in length and 60cm (24inch) in width.
4. د نصب لارښود
Follow these steps for proper installation of your window tint film:
- اندازه کول او پرې کول: Measure the size of the glass surface where the film will be applied. Cut the film to the approximate size, leaving a small margin for trimming.
- د شیشې پاکول: Thoroughly wash the glass surface to remove any dirt, dust, or debris. Spray water generously on the glass to wet it completely.
- Prepare the Film: Carefully tear off the protective liner from the film. Spray water onto the adhesive side (the rubber surface) of the film to wet it.
- فلم تطبیق کړئ: Carefully place the film onto the wet glass surface. Adjust its position as needed. Spray additional water on the film's surface to lubricate it for smoothing.
- Remove Water and Bubbles: Using a squeegee, gently push water and air bubbles from the center of the film outwards towards the edges. Ensure all bubbles are removed for a smooth finish.
- Trim Excess Film: Once the film is smooth and positioned correctly, use a sharp utility knife to carefully trim any excess film along the edges of the glass.
Image 7: A person applying the window tint film to a car window, demonstrating the smoothing process.
انځور ۶: پخوانیamples of where the window tint film can be installed, including side windows, front and rear windshields, and sunroofs.
5. پاملرنه او ساتنه
To ensure the longevity and performance of your window tint film, follow these care guidelines:
- د درملنې وخت: Allow at least 3-5 days for the film to fully cure after installation. Avoid rolling down windows or cleaning the tinted surface during this period.
- پاکول: Use a soft cloth and a non-abrasive, ammonia-free window cleaner. Spray the cleaner onto the cloth first, then wipe the tinted surface gently.
- د سختو کیمیاوي موادو څخه ډډه وکړئ: Do not use cleaners containing ammonia, alcohol, or other harsh chemicals, as these can damage the film.
- د خړوبولو څخه ډډه وکړئ: Do not use abrasive pads, brushes, or tools that could scratch the film.
- منظم معاینه: Periodically check the film for any signs of peeling, bubbling, or damage. Address minor issues promptly to prevent further deterioration.
6. ستونزه حل کول
دلته ځینې عامې ستونزې او د هغوی احتمالي حلونه دي:
- بلبلونه: Small water bubbles are normal immediately after installation and should disappear as the film cures. Larger air bubbles or persistent water bubbles may require re-squeegeeing or professional assistance.
- Peeling Edges: If the film edges begin to peel, it may indicate insufficient cleaning or improper trimming during installation. Re-clean the area and re-apply if possible, or consider professional repair.
- Hazy Appearance: A slight haze is common during the curing process. This should clear up completely once the film is fully dry. Ensure adequate drying time.
- خرما: While the film is scratch-resistant, deep scratches can occur from sharp objects. Minor scratches may be less noticeable over time, but significant damage may require film replacement.
7. تضمین او ملاتړ
For warranty information or technical support, please refer to the product packaging or contact Partuto customer service directly. Keep your proof of purchase for any warranty claims.
د اړیکو معلومات: Please visit the official Partuto website or your retailer's support page for the most up-to-date contact details.