VEVOR US-007/36W UV Disinfection Lamp with Ozone Purifier User Manual

1. Introduction and Important Safety Warnings

Thank you for choosing the VEVOR US-007/36W UV Disinfection Lamp. This device utilizes advanced UV-C light and ozone generation to effectively purify air and surfaces in unoccupied spaces. Please read this manual thoroughly before use to ensure safe and optimal operation.

۲. په بکس کې څه دي؟

Carefully unpack all components and check for any damage. If any items are missing or damaged, please contact VEVOR customer support.

• 1 x VEVOR US-007/36W UV Disinfection Lamp
• 1 x ریموټ کنټرولر
• 1 x Alkaline Battery (23A 12V) for Remote Controller
• 1 x Sticker for Lampshade Top
• ۱ x لارښود لارښود (دا سند)

3. محصول ختم شوview

The VEVOR US-007/36W UV Disinfection Lamp is designed for comprehensive air and surface purification. It features a robust design with intuitive controls.

Image 3.1: Product Details. This image shows the main components of the VEVOR UV Disinfection Lamp, including the ABS flame-retardant lamp cover, the 110W long-lifespan light tube, the hand-operated switch on the base, and the wireless remote controller.

مهمې برخې:

• UV-C Quartz Tube: High-transmission quartz tube emitting 253.7 nm UV-C light and 185 nm UV light for ozone generation.
• ABS Flame Retardant Lamp پوښ: Provides protection for the UV-C tube.
• Base with Control Panel: Features a hand-operated switch and digital display for timer settings.
• بې سیم ریموټ کنټرولر: Allows convenient operation from a distance, offering ON/OFF and timer functions.

Image 3.2: Control Modes. This image illustrates the two control methods: the wireless remote control and the panel control located on the device base. It also highlights the three timer levels: 0.5 hours, 1 hour, and 2 hours.

4. ترتیب کول

1. وسیله خلاص کړئ: Carefully remove the UV Disinfection Lamp and all accessories from its packaging. Retain packaging for future storage or transport.
2. ځای په ځای کول: L ځای پر ځای کړئamp on a stable, flat surface in the center of the room you wish to disinfect. Ensure there are no obstructions blocking the UV light path. The lamp is suitable for rooms up to 37 m² (approximately 400 sq ft).
3. د بریښنا پیوستون: Plug the power cord into a standard electrical outlet (220-240V, 50Hz).
4. د ریموټ کنټرول بیټرۍ نصب کول: Open the battery compartment on the back of the remote control. Insert the provided 23A 12V alkaline battery, ensuring correct polarity (+/-). Close the compartment.
5. کوټه چمتو کړئ: Before operation, ensure all people, pets, and plants are removed from the room. Close all doors and windows to contain the UV-C light and ozone.

5. عملیاتي لارښوونې

دamp can be operated using either the control panel on the device base or the wireless remote control.

د کنټرول پینل کارول:

1. ډاډ ترلاسه کړئ چې lamp is plugged in and the room is empty.
2. Press the power button on the base. The lamp will typically have a delay before turning on to allow you to leave the room safely.
3. Use the timer buttons on the base to select the desired disinfection duration (0.5h, 1h, or 2h).
4. Once the timer is set, the lamp will begin operation after a short delay. Immediately exit the room.

د ریموټ کنټرول کارول:

1. ډاډ ترلاسه کړئ چې lamp is plugged in and the room is empty.
2. Point the remote control towards the lamp.
3. Press the 'ON' button to power on the lamp.
4. Select the desired timer setting (0.5H, 1H, or 2H) using the corresponding buttons on the remote.
5. دamp will activate after a short delay. Immediately exit the room.

د عملیاتو وروسته:

1. Once the selected disinfection cycle is complete, the lamp په اتوماتيک ډول به بند شي.
2. مه کوئ re-enter the room immediately. Open windows and doors (from outside the room if possible) to allow for thorough ventilation.
3. Ventilate the room for at least 30-60 minutes to ensure all ozone has dissipated before re-entry.

Image 5.1: Ozone and UV-C Action. This image visually represents the lamp's dual action, showing UV-C light and ozone (O3) being emitted to purify the air and surfaces within a room, covering up to 37 m².

6. ساتنه

Regular maintenance ensures the longevity and effectiveness of your UV Disinfection Lamp.

د L پاکولamp:

• تل د پاکولو دمخه وسیله د بریښنا له سایټ څخه جلا کړئ.
• Use a soft, dry cloth to gently wipe the exterior of the lamp and the quartz tube.
• Do not use liquid cleaners, abrasive materials, or chemical solvents, as these can damage the device or reduce the effectiveness of the UV-C tube.
• ډاډ ترلاسه کړئ چې lamp مخکې له دې چې بیرته داخل شي په بشپړه توګه وچ وي.

د ریموټ کنټرول بیټرۍ ځای ځای کول:

• If the remote control becomes unresponsive, replace the 23A 12V alkaline battery.
• Open the battery compartment, remove the old battery, and insert a new one with correct polarity.
• زړې بیټرۍ د ځایی مقرراتو سره سم له منځه یوسئ.

7. ستونزه حل کول

If you encounter issues with your VEVOR UV Disinfection Lamp، لاندې عامو ستونزو او حل لارو ته مراجعه وکړئ:

8. مشخصات

Detailed technical specifications for the VEVOR US-007/36W UV Disinfection Lamp.

Image 8.1: Dimensions and Specifications. This image provides a visual representation of the lamp's dimensions and lists key specifications such as model number, power, timer settings, material, wavelength, color, controller size, product size, product weight, and package contents.

9. تضمین او ملاتړ

VEVOR products are designed for durability and performance. This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official VEVOR webد تضمین د تفصيلي شرایطو او مقرراتو لپاره سایټ.

د پیرودونکي ملاتړ:

If you have any questions, require technical assistance, or need to report an issue, please contact VEVOR customer support through their official website or the contact information provided with your purchase. When contacting support, please have your product model number (US-007/36W) and purchase details ready.

For more information and to register your product, visit: www.vevor.com